Market Overview:
The global gas cutting machines market is expected to grow at a CAGR of 5.5% during the forecast period from 2018 to 2030. The growth in the market can be attributed to the increasing demand for gas cutting machines from various end-use industries, such as automotive, aerospace and defense, shipbuilding, industrial machinery and equipment, and others. In terms of type, the portable gas cutting machine segment is expected to grow at a higher CAGR than the stationary gas cutting machine segment during the forecast period. This can be attributed to its easy portability and low installation cost as compared with stationary gas cutting machines.
Product Definition:
Gas Cutting Machines are used to cut metals by means of a gas flame. The gas flame is directed at the metal to be cut and the heat from the flame melts the metal. The molten metal is then blown away by a jet of air, leaving a clean cut edge. Gas Cutting Machines are used in foundries, blacksmiths' shops, engineering workshops and for general repairs.
Portable Gas Cutting Machine:
Portable gas cutting machine is used to cut natural gas, propane and gasoline. It's a type of industrial process equipment which is widely used in various industries such as power generation, oil & gas and petrochemical among others. Portable machines are also known as liquefied petroleum gases (LPG) cutting machines or portable LPG plants which are designed for small scale applications where the production capacity does not exceed 10 MMBtu/day.
Stationery Gas Cutting Machine:
Stationery gas cutting machine is used to cut off the excess air in a process known as re-gasification. It is mainly used for crude oil and natural gas which are produced from fossil fuels. The excess air in these fuels can cause problems during transportation and also result in financial losses due to loss of energy or product contamination.
Application Insights:
The industrial machinery and equipment segment dominated the global gas cutting machines market in 2017, accounting for over 30.0% share of the overall revenue. The growth can be attributed to increasing demand for advanced technology machinery, which is capable of handling various tough materials with ease. Gas-powered machines are widely used in several industries including metal and mining, construction and building material manufacturing, oil and gas extraction among others owing to their ability to handle abrasive particles with ease while providing high precision cuts at a fast pace.
Automotive was the second largest application segment on account of growing use of natural gas as fuel due to its low cost nature coupled with improved performance characteristics over other fossil fuels such as coal or petroleum products derived from crude oil seeds.
Regional Analysis:
Asia Pacific dominated the global gas cutting machines market in 2017. The region is expected to witness significant growth over the forecast period owing to increasing demand for portable and stationary gas cutting machines from various end-use industries such as shipbuilding, automotive, aerospace and defense. In addition, growing industrialization coupled with rapid infrastructure development in countries such as China and India are anticipated to drive regional product demand over the forecast period.
The Asia Pacific was followed by Europe which accounted for a revenue share of more than 20% in 2017 on account of high investments made by governments across several European countries towards R&D activities related to energy efficiency along with other environmental benefits offered by natural gas has led them preferring natural gas as an energy source over other fossil fuels resulting into high adoption rates of these machines across several industries including power generation, metal processing etc. Also government initiatives taken up for promoting domestic manufacturing output through supportive measures such as tax benefits & incentives are also driving industry growth within this region.
Growth Factors:
- Increasing demand for gas cutting machines in automotive and aerospace industries due to the growing need for precision and accuracy in metal cutting.
- Rising demand from small-scale businesses due to the increasing popularity of gas cutting machines as an affordable alternative to laser or water jet cutters.
- Growing use of gas cutting machines in fabricating and repairing metal components for heavy machinery, ships, and other industrial equipment.
- Technological advancements that have led to the development of more efficient and user-friendly gas cutting machines with enhanced capabilities such as plasma arc welding, CNC control, etc.
Scope Of The Report
Report Attributes
Report Details
Report Title
Gas Cutting Machines Market Research Report
By Type
Portable Gas Cutting Machine, Stationery Gas Cutting Machine
By Application
Automotive, Aerospace and Defense, Shipbuilding, Industrial Machinery and Equipment, Other
By Companies
ESAB, Hornet Cutting Systems, Koike Aronson, Messer Cutting Systems, Nissan Tanaka, Ador Welding, Arcbro Cnc Cutting Machine, Esprit Automation, Haco, Harris Products Group, Shangai Welding & Cutting Tool Works, SteelTailor, Voortman Steel Machinery
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
232
Number of Tables & Figures
163
Customization Available
Yes, the report can be customized as per your need.
Global Gas Cutting Machines Market Report Segments:
The global Gas Cutting Machines market is segmented on the basis of:
Types
Portable Gas Cutting Machine, Stationery Gas Cutting Machine
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Automotive, Aerospace and Defense, Shipbuilding, Industrial Machinery and Equipment, Other
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- ESAB
- Hornet Cutting Systems
- Koike Aronson
- Messer Cutting Systems
- Nissan Tanaka
- Ador Welding
- Arcbro Cnc Cutting Machine
- Esprit Automation
- Haco
- Harris Products Group
- Shangai Welding & Cutting Tool Works
- SteelTailor
- Voortman Steel Machinery
Highlights of The Gas Cutting Machines Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Portable Gas Cutting Machine
- Stationery Gas Cutting Machine
- By Application:
- Automotive
- Aerospace and Defense
- Shipbuilding
- Industrial Machinery and Equipment
- Other
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Gas Cutting Machines Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Gas cutting machines are used to cut various types of materials like metals, plastics and other materials. They use a high-pressure gas to cut the material.
Some of the major companies in the gas cutting machines market are ESAB, Hornet Cutting Systems, Koike Aronson, Messer Cutting Systems, Nissan Tanaka, Ador Welding, Arcbro Cnc Cutting Machine, Esprit Automation, Haco, Harris Products Group, Shangai Welding & Cutting Tool Works, SteelTailor, Voortman Steel Machinery.
The gas cutting machines market is expected to register a CAGR of 5.5%.
1. Executive Summary
2. Assumptions and Acronyms Used
3. Research Methodology
4. Gas Cutting Machines Market Overview
4.1. Introduction
4.1.1. Market Taxonomy
4.1.2. Market Definition
4.2. Macro-Economic Factors
4.2.1. Industry Outlook
4.3. Gas Cutting Machines Market Dynamics
4.3.1. Market Drivers
4.3.2. Market Restraints
4.3.3. Opportunity
4.3.4. Market Trends
4.4. Gas Cutting Machines Market - Supply Chain
4.5. Global Gas Cutting Machines Market Forecast
4.5.1. Gas Cutting Machines Market Size (US$ Mn) and Y-o-Y Growth
4.5.2. Gas Cutting Machines Market Size (000 Units) and Y-o-Y Growth
4.5.3. Gas Cutting Machines Market Absolute $ Opportunity
5. Global Gas Cutting Machines Market Analysis and Forecast by Type
5.1. Market Trends
5.2. Introduction
5.2.1. Basis Point Share (BPS) Analysis by Type
5.2.2. Y-o-Y Growth Projections by Type
5.3. Gas Cutting Machines Market Size and Volume Forecast by Type
5.3.1. Portable Gas Cutting Machine
5.3.2. Stationery Gas Cutting Machine
5.4. Absolute $ Opportunity Assessment by Type
5.5. Market Attractiveness/Growth Potential Analysis by Type
6. Global Gas Cutting Machines Market Analysis and Forecast by Application
6.1. Market Trends
6.2. Introduction
6.2.1. Basis Point Share (BPS) Analysis by Application
6.2.2. Y-o-Y Growth Projections by Application
6.3. Gas Cutting Machines Market Size and Volume Forecast by Application
6.3.1. Automotive
6.3.2. Aerospace and Defense
6.3.3. Shipbuilding
6.3.4. Industrial Machinery and Equipment
6.3.5. Other
6.4. Absolute $ Opportunity Assessment by Application
6.5. Market Attractiveness/Growth Potential Analysis by Application
7. Global Gas Cutting Machines Market Analysis and Forecast by Sales Channel
7.1. Market Trends
7.2. Introduction
7.2.1. Basis Point Share (BPS) Analysis by Sales Channel
7.2.2. Y-o-Y Growth Projections by Sales Channel
7.3. Gas Cutting Machines Market Size and Volume Forecast by Sales Channel
7.3.1. Manufacturer/Distributor/Service Provider
7.3.2. Aftermarket
7.4. Absolute $ Opportunity Assessment by Sales Channel
7.5. Market Attractiveness/Growth Potential Analysis by Sales Channel
8. Global Gas Cutting Machines Market Analysis and Forecast by Region
8.1. Market Trends
8.2. Introduction
8.2.1. Basis Point Share (BPS) Analysis by Region
8.2.2. Y-o-Y Growth Projections by Region
8.3. Gas Cutting Machines Market Size and Volume Forecast by Region
8.3.1. North America
8.3.2. Latin America
8.3.3. Europe
8.3.4. Asia Pacific
8.3.5. Middle East and Africa (MEA)
8.4. Absolute $ Opportunity Assessment by Region
8.5. Market Attractiveness/Growth Potential Analysis by Region
8.6. Global Gas Cutting Machines Demand Share Forecast, 2019-2029
9. North America Gas Cutting Machines Market Analysis and Forecast
9.1. Introduction
9.1.1. Basis Point Share (BPS) Analysis by Country
9.1.2. Y-o-Y Growth Projections by Country
9.2. North America Gas Cutting Machines Market Size and Volume Forecast by Country
9.2.1. U.S.
9.2.2. Canada
9.3. Absolute $ Opportunity Assessment by Country
9.4. North America Gas Cutting Machines Market Size and Volume Forecast by Application
9.4.1. Automotive
9.4.2. Aerospace and Defense
9.4.3. Shipbuilding
9.4.4. Industrial Machinery and Equipment
9.4.5. Other
9.5. Basis Point Share (BPS) Analysis by Application
9.6. Y-o-Y Growth Projections by Application
9.7. North America Gas Cutting Machines Market Size and Volume Forecast by Type
9.7.1. Portable Gas Cutting Machine
9.7.2. Stationery Gas Cutting Machine
9.8. Basis Point Share (BPS) Analysis by Type
9.9. Y-o-Y Growth Projections by Type
9.10. Market Attractiveness/Growth Potential Analysis
9.10.1. By Country
9.10.2. By Product Type
9.10.3. By Application
9.10.4. By Sales Channel
9.11. North America Gas Cutting Machines Demand Share Forecast, 2019-2029
10. Latin America Gas Cutting Machines Market Analysis and Forecast
10.1. Introduction
10.1.1. Basis Point Share (BPS) Analysis by Country
10.1.2. Y-o-Y Growth Projections by Country
10.1.3. Latin America Average Pricing Analysis
10.2. Latin America Gas Cutting Machines Market Size and Volume Forecast by Country
10.2.1. Brazil
10.2.2. Mexico
10.2.3. Rest of Latin America
10.3. Absolute $ Opportunity Assessment by Country
10.4. Latin America Gas Cutting Machines Market Size and Volume Forecast by Application
10.4.1. Automotive
10.4.2. Aerospace and Defense
10.4.3. Shipbuilding
10.4.4. Industrial Machinery and Equipment
10.4.5. Other
10.5. Basis Point Share (BPS) Analysis by Application
10.6. Y-o-Y Growth Projections by Application
10.7. Latin America Gas Cutting Machines Market Size and Volume Forecast by Type
10.7.1. Portable Gas Cutting Machine
10.7.2. Stationery Gas Cutting Machine
10.8. Basis Point Share (BPS) Analysis by Type
10.9. Y-o-Y Growth Projections by Type
10.10. Market Attractiveness/Growth Potential Analysis
10.10.1. By Country
10.10.2. By Product Type
10.10.3. By Application
10.10.4. By Sales Channel
10.11. Latin America Gas Cutting Machines Demand Share Forecast, 2019-2029
11. Europe Gas Cutting Machines Market Analysis and Forecast
11.1. Introduction
11.1.1. Basis Point Share (BPS) Analysis by Country
11.1.2. Y-o-Y Growth Projections by Country
11.1.3. Europe Average Pricing Analysis
11.2. Europe Gas Cutting Machines Market Size and Volume Forecast by Country
11.2.1. Germany
11.2.2. France
11.2.3. Italy
11.2.4. U.K.
11.2.5. Spain
11.2.6. Russia
11.2.7. Rest of Europe
11.3. Absolute $ Opportunity Assessment by Country
11.4. Europe Gas Cutting Machines Market Size and Volume Forecast by Application
11.4.1. Automotive
11.4.2. Aerospace and Defense
11.4.3. Shipbuilding
11.4.4. Industrial Machinery and Equipment
11.4.5. Other
11.5. Basis Point Share (BPS) Analysis by Application
11.6. Y-o-Y Growth Projections by Application
11.7. Europe Gas Cutting Machines Market Size and Volume Forecast by Type
11.7.1. Portable Gas Cutting Machine
11.7.2. Stationery Gas Cutting Machine
11.8. Basis Point Share (BPS) Anlysis by Type
11.9. Y-o-Y Growth Projections by Type
11.10. Market Attractiveness/Growth Potential Analysis
11.10.1. By Country
11.10.2. By Product Type
11.10.3. By Application
11.10.4. By Sales Channel
11.11. Europe Gas Cutting Machines Demand Share, 2019-2029
12. Asia Pacific Gas Cutting Machines Market Analysis and Forecast
12.1. Introduction
12.1.1. Basis Point Share (BPS) Analysis by Country
12.1.2. Y-o-Y Growth Projections by Country
12.1.3. Asia Pacific Average Pricing Analysis
12.2. Asia Pacific Gas Cutting Machines Market Size and Volume Forecast by Country
12.2.1. China
12.2.2. Japan
12.2.3. South Korea
12.2.4. India
12.2.5. Australia
12.2.6. Rest of Asia Pacific (APAC)
12.3. Absolute $ Opportunity Assessment by Country
12.4. Asia Pacific Gas Cutting Machines Market Size and Volume Forecast by Application
12.4.1. Automotive
12.4.2. Aerospace and Defense
12.4.3. Shipbuilding
12.4.4. Industrial Machinery and Equipment
12.4.5. Other
12.5. Basis Point Share (BPS) Analysis by Application
12.6. Y-o-Y Growth Projections by Application
12.7. Asia Pacific Gas Cutting Machines Market Size and Volume Forecast by Type
12.7.1. Portable Gas Cutting Machine
12.7.2. Stationery Gas Cutting Machine
12.8. Basis Point Share (BPS) Analysis by Type
12.9. Y-o-Y Growth Projections by Type
12.10. Market Attractiveness/Growth Potential Analysis
12.10.1. By Country
12.10.2. By Product Type
12.10.3. By Application
12.10.4. By Sales Channel
12.11. Asia Pacific Gas Cutting Machines Demand Share, 2019-2029
13. Middle East & Africa Gas Cutting Machines Market Analysis and Forecast
13.1. Introduction
13.1.1. Basis Point Share (BPS) Analysis by Country
13.1.2. Y-o-Y Growth Projections by Country
13.1.3. Asia Pacific Average Pricing Analysis
13.2. Middle East & Africa Gas Cutting Machines Market Size and Volume Forecast by Country
13.2.1. Saudi Arabia
13.2.2. South Africa
13.2.3. UAE
13.2.4. Rest of Middle East & Africa (MEA)
13.3. Absolute $ Opportunity Assessment by Country
13.4. Middle East & Africa Gas Cutting Machines Market Size and Volume Forecast by Application
13.4.1. Automotive
13.4.2. Aerospace and Defense
13.4.3. Shipbuilding
13.4.4. Industrial Machinery and Equipment
13.4.5. Other
13.5. Basis Point Share (BPS) Analysis by Application
13.6. Y-o-Y Growth Projections by Application
13.7. Middle East & Africa Gas Cutting Machines Market Size and Volume Forecast by Type
13.7.1. Portable Gas Cutting Machine
13.7.2. Stationery Gas Cutting Machine
13.8. Basis Point Share (BPS) Analysis by Type
13.9. Y-o-Y Growth Projections by Type
13.10. Market Attractiveness/Growth Potential Analysis
13.10.1. By Country
13.10.2. By Product Type
13.10.3. By Application
13.10.4. By Sales Channel
13.11. Middle East & Africa Gas Cutting Machines Demand Share, 2019-2029
14. Competition Landscape
14.1. Global Gas Cutting Machines Market: Market Share Analysis
14.2. Gas Cutting Machines Distributors and Customers
14.3. Gas Cutting Machines Market: Competitive Dashboard
14.4. Company Profiles (Details Overview, Financials, Developments, Strategy)
14.4.1. ESAB
14.4.1.1. Overview
14.4.1.2. Financials
14.4.1.3. Developments
14.4.1.4. Strategic Outlook
14.4.2. Hornet Cutting Systems
14.4.2.1. Overview
14.4.2.2. Financials
14.4.2.3. Developments
14.4.2.4. Strategic Outlook
14.4.3. Koike Aronson
14.4.3.1. Overview
14.4.3.2. Financials
14.4.3.3. Developments
14.4.3.4. Strategic Outlook
14.4.4. Messer Cutting Systems
14.4.4.1. Overview
14.4.4.2. Financials
14.4.4.3. Developments
14.4.4.4. Strategic Outlook
14.4.5. Nissan Tanaka
14.4.5.1. Overview
14.4.5.2. Financials
14.4.5.3. Developments
14.4.5.4. Strategic Outlook
14.4.6. Ador Welding
14.4.6.1. Overview
14.4.6.2. Financials
14.4.6.3. Developments
14.4.6.4. Strategic Outlook
14.4.7. Arcbro Cnc Cutting Machine
14.4.7.1. Overview
14.4.7.2. Financials
14.4.7.3. Developments
14.4.7.4. Strategic Outlook
14.4.8. Esprit Automation
14.4.8.1. Overview
14.4.8.2. Financials
14.4.8.3. Developments
14.4.8.4. Strategic Outlook
14.4.9. Haco
14.4.9.1. Overview
14.4.9.2. Financials
14.4.9.3. Developments
14.4.9.4. Strategic Outlook
14.4.10. Harris Products Group
14.4.10.1. Overview
14.4.10.2. Financials
14.4.10.3. Developments
14.4.10.4. Strategic Outlook
14.4.11. Shangai Welding & Cutting Tool Works
14.4.11.1. Overview
14.4.11.2. Financials
14.4.11.3. Developments
14.4.11.4. Strategic Outlook
14.4.12. SteelTailor
14.4.12.1. Overview
14.4.12.2. Financials
14.4.12.3. Developments
14.4.12.4. Strategic Outlook
14.4.13. Voortman Steel Machinery
14.4.13.1. Overview
14.4.13.2. Financials
14.4.13.3. Developments
14.4.13.4. Strategic Outlook
14.4.14. COMPANY 14
14.4.14.1. Overview
14.4.14.2. Financials
14.4.14.3. Developments
14.4.14.4. Strategic Outlook
14.4.15. COMPANY 15
14.4.15.1. Overview
14.4.15.2. Financials
14.4.15.3. Developments
14.4.15.4. Strategic Outlook
14.4.16. COMPANY 16
14.4.16.1. Overview
14.4.16.2. Financials
14.4.16.3. Developments
14.4.16.4. Strategic Outlook
14.4.17. COMPANY 17
14.4.17.1. Overview
14.4.17.2. Financials
14.4.17.3. Developments
14.4.17.4. Strategic Outlook
14.4.18. COMPANY 18
14.4.18.1. Overview
14.4.18.2. Financials
14.4.18.3. Developments
14.4.18.4. Strategic Outlook
14.4.19. COMPANY 19
14.4.19.1. Overview
14.4.19.2. Financials
14.4.19.3. Developments
14.4.19.4. Strategic Outlook
14.4.20. COMPANY 20
14.4.20.1. Overview
14.4.20.2. Financials
14.4.20.3. Developments
14.4.20.4. Strategic Outlook