Market Overview:
The global defoamer for injection molding market is expected to grow at a CAGR of 5.5% during the forecast period from 2018 to 2030. The growth in this market can be attributed to the increasing demand for electronic communications, furniture, and automobiles across the globe. In addition, the growing demand for lightweight and fuel-efficient vehicles is also contributing to the growth of this market. Furthermore, rising awareness about environmental protection is also propelling the growth of this market. However, volatility in raw material prices may restrain the growth of this market during the forecast period.
Product Definition:
A defoamer is a material that is used to decrease or prevent the formation of foam in a liquid. It is often an additive that is added to the liquid mixture, and it helps to control the expansion of gas bubbles that can form during the manufacturing process. Defoamers are important for injection molding because they help to produce parts with a smooth surface finish. Without defoamers, parts may have visible air pockets or other surface defects.
Eliminate Bubbles:
The eliminate bubbles (eliminate) technique is used to reduce the foam in injection molding. It works by creating a super-saturated solution of polymer and liquid resin, which results in reduced foam formation during the process of injection molding. The elimination process can be carried out with or without heat, but it's most effective when done with heat.
Suppress Bubbles:
Suppress bubbles are gas-filled microspheres used to reduce the formation of foam during injection molding. They are added in the molten metal or plastic feedstock before it is injected into a mold cavity and act as a nucleation agent, thereby reducing the foam formation. The product also prevents metal particles from becoming airborne, which can cause safety issues during handling and transportation of finished products.
The global suppress bubbles.
Application Insights:
The defoamer for injection molding is used in various applications including automobile, furniture, electronic communications and others. The automobile application segment accounted for the largest market share of over 30% in 2017. Injection-molded parts are widely used in the automotive industry owing to their lightweight properties and high strength-to-weight ratio. This is expected to drive demand over the forecast period.
The electronics and medical equipment industries also use plastic components that require minimal maintenance due to their mechanical properties and low cost compared with metals or other engineering plastics such as polypropylene (PP). Defoamers are also used during production of consumer electronics products such as mobile phones, tablets computers etc.
Regional Analysis:
Europe was the largest regional market for defoamers, accounting for a share of more than 30.0% in 2017 owing to the presence of key players and well-established automotive and electronics manufacturing industries. The region is expected to maintain its lead over the forecast period due to factors such as increasing demand from various end-use sectors including healthcare, electronics, transportation & warehousing, food & beverage among others.
Asia Pacific is projected to be one of the fastest growing regions with a CAGR exceeding 6.5% during the forecast period on account of rapid industrialization coupled with improving economic conditions in emerging countries such as China and India are anticipated to boost product demand over next eight years.
Growth Factors:
- Increasing demand for lightweight and durable plastic products: The global injection molding market is expected to grow at a CAGR of 5.5% from 2017 to 2025, owing to the increasing demand for lightweight and durable plastic products. This is likely to drive the growth of the defoamer for injection molding market during the forecast period.
- Rising demand from automotive industry: The automotive industry is one of the key end-users of plastics, globally. Injection molded parts are extensively used in various applications such as exterior trim, under-the-hood components, interior trim and seating, among others. This is likely to fuel the growth of the defoamer for injection molding market during the forecast period.
- Growing popularity of 3D printing technology: 3D printing technology offers several advantages over traditional manufacturing processes such as reduced lead time, improved part accuracy and design flexibility, among others. This is likely to boost its adoption in various industries including automotive and medical devices industries which would subsequently drivethe growthofdefoamersforinjectionmoldingmarketduringtheforecastperiod .
Scope Of The Report
Report Attributes
Report Details
Report Title
Defoamer for Injection Molding Market Research Report
By Type
Eliminate Bubbles, Suppress Bubbles, Others
By Application
Electronic Communications, Furniture, Automobile, Others
By Companies
Shandong Huaxiang Plastic, Rapid Robotics, Foshan Huarui Plastic Material, Clariant, ANTIFOAM, Kemira, GEO SPECIALITY CHEMICALS, Crucible Chemical Company, Applied Material Solutions, Economy Polymers & Chemicals, Shandong Huaxiang Plastic, SAE Manufacturing Specialties Corp, Wyo-Ben
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
212
Number of Tables & Figures
149
Customization Available
Yes, the report can be customized as per your need.
Global Defoamer for Injection Molding Market Report Segments:
The global Defoamer for Injection Molding market is segmented on the basis of:
Types
Eliminate Bubbles, Suppress Bubbles, Others
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Electronic Communications, Furniture, Automobile, Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Shandong Huaxiang Plastic
- Rapid Robotics
- Foshan Huarui Plastic Material
- Clariant
- ANTIFOAM
- Kemira
- GEO SPECIALITY CHEMICALS
- Crucible Chemical Company
- Applied Material Solutions
- Economy Polymers & Chemicals
- Shandong Huaxiang Plastic
- SAE Manufacturing Specialties Corp
- Wyo-Ben
Highlights of The Defoamer for Injection Molding Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Eliminate Bubbles
- Suppress Bubbles
- Others
- By Application:
- Electronic Communications
- Furniture
- Automobile
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Defoamer for Injection Molding Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
A defoamer is a chemical used in injection molding to reduce the amount of gas that is released during the manufacturing process. This reduces the risk of blowouts and other problems associated with high-pressure injection molding.
Some of the major players in the defoamer for injection molding market are Shandong Huaxiang Plastic, Rapid Robotics, Foshan Huarui Plastic Material, Clariant, ANTIFOAM, Kemira, GEO SPECIALITY CHEMICALS, Crucible Chemical Company, Applied Material Solutions, Economy Polymers & Chemicals, Shandong Huaxiang Plastic, SAE Manufacturing Specialties Corp, Wyo-Ben.
The defoamer for injection molding market is expected to grow at a compound annual growth rate of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Defoamer for Injection Molding Market Overview 4.1 Introduction 4.1.1 Market Taxonomy 4.1.2 Market Definition 4.1.3 Macro-Economic Factors Impacting the Market Growth 4.2 Defoamer for Injection Molding Market Dynamics 4.2.1 Market Drivers 4.2.2 Market Restraints 4.2.3 Market Opportunity 4.3 Defoamer for Injection Molding Market - Supply Chain Analysis 4.3.1 List of Key Suppliers 4.3.2 List of Key Distributors 4.3.3 List of Key Consumers 4.4 Key Forces Shaping the Defoamer for Injection Molding Market 4.4.1 Bargaining Power of Suppliers 4.4.2 Bargaining Power of Buyers 4.4.3 Threat of Substitution 4.4.4 Threat of New Entrants 4.4.5 Competitive Rivalry 4.5 Global Defoamer for Injection Molding Market Size & Forecast, 2018-2028 4.5.1 Defoamer for Injection Molding Market Size and Y-o-Y Growth 4.5.2 Defoamer for Injection Molding Market Absolute $ Opportunity
Chapter 5 Global Defoamer for Injection Molding Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Defoamer for Injection Molding Market Size Forecast by Type
5.2.1 Eliminate Bubbles
5.2.2 Suppress Bubbles
5.2.3 Others
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Defoamer for Injection Molding Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Defoamer for Injection Molding Market Size Forecast by Applications
6.2.1 Electronic Communications
6.2.2 Furniture
6.2.3 Automobile
6.2.4 Others
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Defoamer for Injection Molding Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Defoamer for Injection Molding Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Defoamer for Injection Molding Analysis and Forecast
9.1 Introduction
9.2 North America Defoamer for Injection Molding Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Defoamer for Injection Molding Market Size Forecast by Type
9.6.1 Eliminate Bubbles
9.6.2 Suppress Bubbles
9.6.3 Others
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Defoamer for Injection Molding Market Size Forecast by Applications
9.10.1 Electronic Communications
9.10.2 Furniture
9.10.3 Automobile
9.10.4 Others
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Defoamer for Injection Molding Analysis and Forecast
10.1 Introduction
10.2 Europe Defoamer for Injection Molding Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Defoamer for Injection Molding Market Size Forecast by Type
10.6.1 Eliminate Bubbles
10.6.2 Suppress Bubbles
10.6.3 Others
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Defoamer for Injection Molding Market Size Forecast by Applications
10.10.1 Electronic Communications
10.10.2 Furniture
10.10.3 Automobile
10.10.4 Others
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Defoamer for Injection Molding Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Defoamer for Injection Molding Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Defoamer for Injection Molding Market Size Forecast by Type
11.6.1 Eliminate Bubbles
11.6.2 Suppress Bubbles
11.6.3 Others
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Defoamer for Injection Molding Market Size Forecast by Applications
11.10.1 Electronic Communications
11.10.2 Furniture
11.10.3 Automobile
11.10.4 Others
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Defoamer for Injection Molding Analysis and Forecast
12.1 Introduction
12.2 Latin America Defoamer for Injection Molding Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Defoamer for Injection Molding Market Size Forecast by Type
12.6.1 Eliminate Bubbles
12.6.2 Suppress Bubbles
12.6.3 Others
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Defoamer for Injection Molding Market Size Forecast by Applications
12.10.1 Electronic Communications
12.10.2 Furniture
12.10.3 Automobile
12.10.4 Others
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Defoamer for Injection Molding Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Defoamer for Injection Molding Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Defoamer for Injection Molding Market Size Forecast by Type
13.6.1 Eliminate Bubbles
13.6.2 Suppress Bubbles
13.6.3 Others
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Defoamer for Injection Molding Market Size Forecast by Applications
13.10.1 Electronic Communications
13.10.2 Furniture
13.10.3 Automobile
13.10.4 Others
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Defoamer for Injection Molding Market: Competitive Dashboard
14.2 Global Defoamer for Injection Molding Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Shandong Huaxiang Plastic
14.3.2 Rapid Robotics
14.3.3 Foshan Huarui Plastic Material
14.3.4 Clariant
14.3.5 ANTIFOAM
14.3.6 Kemira
14.3.7 GEO SPECIALITY CHEMICALS
14.3.8 Crucible Chemical Company
14.3.9 Applied Material Solutions
14.3.10 Economy Polymers & Chemicals
14.3.11 Shandong Huaxiang Plastic
14.3.12 SAE Manufacturing Specialties Corp
14.3.13 Wyo-Ben