Market Overview:
The global plastics recycling plants market is expected to grow at a CAGR of 5.5% during the forecast period from 2018 to 2030. The growth in this market can be attributed to the increasing awareness about the benefits of recycling plastic waste and the rising demand for recycled plastic products. In terms of type, shears are expected to lead the global plastics recycling plants market during the forecast period, followed by balers and separators. In terms of application, food is expected to be the largest segment of the global plastics recycling plants market during 2018-2030, followed by chemical and daily necessities segments.
Product Definition:
Plastics recycling plants are factories that recycle plastic materials into new products. The importance of these plants is that they keep plastic out of landfills and help reduce the amount of pollution caused by plastic production and disposal.
Shears:
Shears are used in plastic recycling plants to cut the mixed plastics and rubber into pieces of suitable sizes for processing. The shears are available in different forms such as benchtop, table top, floor model and heavy-duty shears.
Balers:
The balers are machines used to compact the plastic waste and turn it into bales. The balers have several functions in a plastics recycling plant including pre-crushing, crushing, screening & pulverizing, and fine particle size reduction. In addition to these functions the balers also act as heat exchangers during the processing of melting recycled plastic scrap for re-molding into new products.
Application Insights:
The global plastics recycling plants market has been segmented on the basis of application into food, chemical, daily necessities and other. The food application dominated the overall industry in terms of revenue as well as volume in 2017. It is estimated to continue its dominance over the forecast period owing to a high demand for packaged foods particularly across emerging countries such as India and China.
Plastic bottles are used for packaging water which is a basic necessity of life globally; this factor along with increasing awareness about environmental protection is expected to drive demand for plastic bottles thereby supporting growth in the global recycling industry over the forecast period. In addition, growing concerns regarding waste management coupled with rising disposable income levels have led consumers around the globe to change their consumption patterns towards more sustainable products including recycled polymers which further supports growth in demand globally.
Regional Analysis:
Asia Pacific dominated the global market in 2017. The region is expected to witness a high growth rate of 7.6% over the forecast period, owing to rapid industrialization and urbanization coupled with increasing disposable income levels in emerging economies such as China and India. Moreover, rising environmental concerns have resulted in stringent regulations for plastic waste management across various industries including manufacturing, packaging, construction & infrastructural sectors which are likely to propel demand for recycling plants across Asia Pacific over the coming years.
Europe was estimated at USD X million in 2017.
Growth Factors:
- Increasing awareness about the benefits of recycling plastic waste among consumers and businesses
- Stringent government regulations on waste management and increasing landfill costs are driving the demand for plastics recycling plants
- Growing use of recycled plastics in manufacturing industries
- Technological advancements in plastics recycling technology that improve the efficiency and quality of recycled products
- Rising prices of crude oil, which is used to produce virgin plastic, are making recycled plastic more economical
Scope Of The Report
Report Attributes
Report Details
Report Title
Plastics Recycling Plants Market Research Report
By Type
Shears, Balers, Separators
By Application
Food, Chemical, Daily Necessities
By Companies
Coparm, Bezner, NM Heilig, Kiverco, CP Manufacturing, Metso, PCI Equipment, Krause Manufacturing, MHM Recycling, Komptech Americas
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
142
Number of Tables & Figures
100
Customization Available
Yes, the report can be customized as per your need.
Global Plastics Recycling Plants Market Report Segments:
The global Plastics Recycling Plants market is segmented on the basis of:
Types
Shears, Balers, Separators
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Food, Chemical, Daily Necessities
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Coparm
- Bezner
- NM Heilig
- Kiverco
- CP Manufacturing
- Metso
- PCI Equipment
- Krause Manufacturing
- MHM Recycling
- Komptech Americas
Highlights of The Plastics Recycling Plants Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Shears
- Balers
- Separators
- By Application:
- Food
- Chemical
- Daily Necessities
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Plastics Recycling Plants Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
A plastics recycling plant is a facility that processes plastic waste to create new products. The plants use a variety of methods to break down the plastic into smaller pieces, including gasification and incineration. This process separates usable materials, such as polyethylene and polypropylene, from non-usable material, such as ash and carbon dioxide.
Some of the major companies in the plastics recycling plants market are Coparm, Bezner, NM Heilig, Kiverco, CP Manufacturing, Metso, PCI Equipment, Krause Manufacturing, MHM Recycling, Komptech Americas.
The plastics recycling plants market is expected to grow at a compound annual growth rate of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Plastics Recycling Plants Market Overview 4.1 Introduction 4.1.1 Market Taxonomy 4.1.2 Market Definition 4.1.3 Macro-Economic Factors Impacting the Market Growth 4.2 Plastics Recycling Plants Market Dynamics 4.2.1 Market Drivers 4.2.2 Market Restraints 4.2.3 Market Opportunity 4.3 Plastics Recycling Plants Market - Supply Chain Analysis 4.3.1 List of Key Suppliers 4.3.2 List of Key Distributors 4.3.3 List of Key Consumers 4.4 Key Forces Shaping the Plastics Recycling Plants Market 4.4.1 Bargaining Power of Suppliers 4.4.2 Bargaining Power of Buyers 4.4.3 Threat of Substitution 4.4.4 Threat of New Entrants 4.4.5 Competitive Rivalry 4.5 Global Plastics Recycling Plants Market Size & Forecast, 2018-2028 4.5.1 Plastics Recycling Plants Market Size and Y-o-Y Growth 4.5.2 Plastics Recycling Plants Market Absolute $ Opportunity
Chapter 5 Global Plastics Recycling Plants Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Plastics Recycling Plants Market Size Forecast by Type
5.2.1 Shears
5.2.2 Balers
5.2.3 Separators
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Plastics Recycling Plants Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Plastics Recycling Plants Market Size Forecast by Applications
6.2.1 Food
6.2.2 Chemical
6.2.3 Daily Necessities
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Plastics Recycling Plants Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Plastics Recycling Plants Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Plastics Recycling Plants Analysis and Forecast
9.1 Introduction
9.2 North America Plastics Recycling Plants Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Plastics Recycling Plants Market Size Forecast by Type
9.6.1 Shears
9.6.2 Balers
9.6.3 Separators
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Plastics Recycling Plants Market Size Forecast by Applications
9.10.1 Food
9.10.2 Chemical
9.10.3 Daily Necessities
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Plastics Recycling Plants Analysis and Forecast
10.1 Introduction
10.2 Europe Plastics Recycling Plants Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Plastics Recycling Plants Market Size Forecast by Type
10.6.1 Shears
10.6.2 Balers
10.6.3 Separators
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Plastics Recycling Plants Market Size Forecast by Applications
10.10.1 Food
10.10.2 Chemical
10.10.3 Daily Necessities
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Plastics Recycling Plants Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Plastics Recycling Plants Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Plastics Recycling Plants Market Size Forecast by Type
11.6.1 Shears
11.6.2 Balers
11.6.3 Separators
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Plastics Recycling Plants Market Size Forecast by Applications
11.10.1 Food
11.10.2 Chemical
11.10.3 Daily Necessities
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Plastics Recycling Plants Analysis and Forecast
12.1 Introduction
12.2 Latin America Plastics Recycling Plants Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Plastics Recycling Plants Market Size Forecast by Type
12.6.1 Shears
12.6.2 Balers
12.6.3 Separators
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Plastics Recycling Plants Market Size Forecast by Applications
12.10.1 Food
12.10.2 Chemical
12.10.3 Daily Necessities
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Plastics Recycling Plants Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Plastics Recycling Plants Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Plastics Recycling Plants Market Size Forecast by Type
13.6.1 Shears
13.6.2 Balers
13.6.3 Separators
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Plastics Recycling Plants Market Size Forecast by Applications
13.10.1 Food
13.10.2 Chemical
13.10.3 Daily Necessities
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Plastics Recycling Plants Market: Competitive Dashboard
14.2 Global Plastics Recycling Plants Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Coparm
14.3.2 Bezner
14.3.3 NM Heilig
14.3.4 Kiverco
14.3.5 CP Manufacturing
14.3.6 Metso
14.3.7 PCI Equipment
14.3.8 Krause Manufacturing
14.3.9 MHM Recycling
14.3.10 Komptech Americas