Market Overview:
The global temperature and humidity test chamber market is expected to grow at a CAGR of 5.5% from 2018 to 2030. The growth in the market can be attributed to the increasing demand for temperature and humidity test chambers from various end-use industries, such as automotive, aerospace, electronics, pharmaceuticals, and others. In addition, the growing awareness about quality control and product reliability is also fueling the demand for temperature and humidity test chambers globally. Based on type, the global temperature and humidity test chamber market can be segmented into air cooling type and water cooling type. Air cooling type is expected to account for a larger share of the market in 2018 owing to its low cost as compared to water cooling type.
Product Definition:
A Temperature and Humidity Test Chamber is a device used to test the effects of temperature and humidity on materials, products, or systems. The importance of Temperature & Humidity Test Chambers can be seen in many industries, as it allows for quality control testing to ensure that products meet specific standards.
Air Cooling:
Air cooling is a process of removing heat from an electronic device or component by allowing free flow of air around it. It helps in maintaining the temperature and humidity levels inside the test chamber. In case of high power electronic devices, this process is very much necessary to avoid any damage due to overheating.
Advantages associated with air cooling include increased reliability, extended shelf life, and lower maintenance costs among others.
Water Cooling:
Water cooling is the process of removing heat from a system by using water as an external medium. In case of high power systems, it is used to remove the heat generated in electrical components. It helps in increasing the life and performance of electronic devices by avoiding overheating and thermal fatigue. The cooling effect also reduces electrical noise, thereby making electronic devices work more efficiently.
Application Insights:
The automotive application segment accounted for the largest revenue share in 2017 and is projected to continue its dominance over the forecast period. The temperature and humidity testing chambers are used to test a vehicle¢â‚¬â„¢s interior components including seats, airbags, HVAC (heating, ventilation & cooling), electronics, battery packs and fuel systems. These devices also check if there are any corrosion or condensation issues with interiors of vehicles that remain hidden until water or moisture get inside a component.
The aerospace application segment is expected to witness significant growth over the forecast period owing to rising demand for advanced aircraft with enhanced passenger comfort levels at reduced operating costs.
Regional Analysis:
The Asia Pacific region is anticipated to witness the highest CAGR of XX% over the forecast period owing to increasing demand for temperature & humidity test chambers from various end-use industries, such as aerospace and electronics. The rising production of smartphones and laptops in this region has led to an increase in product demand from component manufacturers, who require testing equipment that can handle high volume production with ease.
Moreover, countries such as China and India are experiencing a surge in automotive manufacturing activities due to low labor costs associated with these activities; therefore, vehicle manufacturers are investing heavily in R&D facilities for developing cost-effective vehicles. This is expected to drive product demand over the next eight years.
Growth Factors:
- Increasing demand for temperature and humidity test chambers from the automotive industry to ensure quality of products
- Growing popularity of miniaturized temperature and humidity test chambers for research and development applications
- Proliferation of smart technologies in temperature and humidity test chambers for enhanced performance
- Rising demand for customized temperature and humidity test chambers to meet specific requirements of end-users
- Emergence of new players in the market with innovative products
Scope Of The Report
Report Attributes
Report Details
Report Title
Temperature & Humidity Test Chamber Market Research Report
By Type
Air Cooling, Water Cooling
By Application
Automotive, Aerospace, Electronics, Pharmaceutical, Other
By Companies
ESPEC, Schunk Group, Thermotron, BINDER, Memmert, Angelantoni Test Technologies (ACS), Thermal Product Solutions (TPS), Climatic Testing Systems (CTS), CME (CM Envirosystems), Envsin, Russells Technical Products, Torontech, Scientific Climate Systems (SCS), Hastest Solutions, KOMEG Technology, Equilam N.A., Presto Testing Instruments, Associated Environmental Systems (AES), Sanwood Environmental Chambers, Xi'an LIB Environmental Simulation, Shanghai Linpin, Guangdong GRANDE, Wewon Environmental Chambers, Gester Instruments, Terchy Environmental Technology
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
217
Number of Tables & Figures
152
Customization Available
Yes, the report can be customized as per your need.
Global Temperature & Humidity Test Chamber Market Report Segments:
The global Temperature & Humidity Test Chamber market is segmented on the basis of:
Types
Air Cooling, Water Cooling
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Automotive, Aerospace, Electronics, Pharmaceutical, Other
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- ESPEC
- Schunk Group
- Thermotron
- BINDER
- Memmert
- Angelantoni Test Technologies (ACS)
- Thermal Product Solutions (TPS)
- Climatic Testing Systems (CTS)
- CME (CM Envirosystems)
- Envsin
- Russells Technical Products
- Torontech
- Scientific Climate Systems (SCS)
- Hastest Solutions
- KOMEG Technology
- Equilam N.A.
- Presto Testing Instruments
- Associated Environmental Systems (AES)
- Sanwood Environmental Chambers
- Xi'an LIB Environmental Simulation
- Shanghai Linpin
- Guangdong GRANDE
- Wewon Environmental Chambers
- Gester Instruments
- Terchy Environmental Technology
Highlights of The Temperature & Humidity Test Chamber Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Air Cooling
- Water Cooling
- By Application:
- Automotive
- Aerospace
- Electronics
- Pharmaceutical
- Other
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Temperature & Humidity Test Chamber Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
A temperature and humidity test chamber is a sealed environment used to measure the effects of changes in temperature and humidity on materials.
Some of the major companies in the temperature & humidity test chamber market are ESPEC, Schunk Group, Thermotron, BINDER, Memmert, Angelantoni Test Technologies (ACS), Thermal Product Solutions (TPS), Climatic Testing Systems (CTS), CME (CM Envirosystems), Envsin, Russells Technical Products, Torontech, Scientific Climate Systems (SCS), Hastest Solutions, KOMEG Technology, Equilam N.A., Presto Testing Instruments, Associated Environmental Systems (AES), Sanwood Environmental Chambers, Xi'an LIB Environmental Simulation, Shanghai Linpin, Guangdong GRANDE, Wewon Environmental Chambers, Gester Instruments, Terchy Environmental Technology.
The temperature & humidity test chamber market is expected to register a CAGR of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Temperature & Humidity Test Chamber Market Overview 4.1 Introduction 4.1.1 Market Taxonomy 4.1.2 Market Definition 4.1.3 Macro-Economic Factors Impacting the Market Growth 4.2 Temperature & Humidity Test Chamber Market Dynamics 4.2.1 Market Drivers 4.2.2 Market Restraints 4.2.3 Market Opportunity 4.3 Temperature & Humidity Test Chamber Market - Supply Chain Analysis 4.3.1 List of Key Suppliers 4.3.2 List of Key Distributors 4.3.3 List of Key Consumers 4.4 Key Forces Shaping the Temperature & Humidity Test Chamber Market 4.4.1 Bargaining Power of Suppliers 4.4.2 Bargaining Power of Buyers 4.4.3 Threat of Substitution 4.4.4 Threat of New Entrants 4.4.5 Competitive Rivalry 4.5 Global Temperature & Humidity Test Chamber Market Size & Forecast, 2018-2028 4.5.1 Temperature & Humidity Test Chamber Market Size and Y-o-Y Growth 4.5.2 Temperature & Humidity Test Chamber Market Absolute $ Opportunity
Chapter 5 Global Temperature & Humidity Test Chamber Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Temperature & Humidity Test Chamber Market Size Forecast by Type
5.2.1 Air Cooling
5.2.2 Water Cooling
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Temperature & Humidity Test Chamber Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Temperature & Humidity Test Chamber Market Size Forecast by Applications
6.2.1 Automotive
6.2.2 Aerospace
6.2.3 Electronics
6.2.4 Pharmaceutical
6.2.5 Other
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Temperature & Humidity Test Chamber Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Temperature & Humidity Test Chamber Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Temperature & Humidity Test Chamber Analysis and Forecast
9.1 Introduction
9.2 North America Temperature & Humidity Test Chamber Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Temperature & Humidity Test Chamber Market Size Forecast by Type
9.6.1 Air Cooling
9.6.2 Water Cooling
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Temperature & Humidity Test Chamber Market Size Forecast by Applications
9.10.1 Automotive
9.10.2 Aerospace
9.10.3 Electronics
9.10.4 Pharmaceutical
9.10.5 Other
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Temperature & Humidity Test Chamber Analysis and Forecast
10.1 Introduction
10.2 Europe Temperature & Humidity Test Chamber Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Temperature & Humidity Test Chamber Market Size Forecast by Type
10.6.1 Air Cooling
10.6.2 Water Cooling
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Temperature & Humidity Test Chamber Market Size Forecast by Applications
10.10.1 Automotive
10.10.2 Aerospace
10.10.3 Electronics
10.10.4 Pharmaceutical
10.10.5 Other
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Temperature & Humidity Test Chamber Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Temperature & Humidity Test Chamber Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Temperature & Humidity Test Chamber Market Size Forecast by Type
11.6.1 Air Cooling
11.6.2 Water Cooling
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Temperature & Humidity Test Chamber Market Size Forecast by Applications
11.10.1 Automotive
11.10.2 Aerospace
11.10.3 Electronics
11.10.4 Pharmaceutical
11.10.5 Other
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Temperature & Humidity Test Chamber Analysis and Forecast
12.1 Introduction
12.2 Latin America Temperature & Humidity Test Chamber Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Temperature & Humidity Test Chamber Market Size Forecast by Type
12.6.1 Air Cooling
12.6.2 Water Cooling
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Temperature & Humidity Test Chamber Market Size Forecast by Applications
12.10.1 Automotive
12.10.2 Aerospace
12.10.3 Electronics
12.10.4 Pharmaceutical
12.10.5 Other
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Temperature & Humidity Test Chamber Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Temperature & Humidity Test Chamber Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Temperature & Humidity Test Chamber Market Size Forecast by Type
13.6.1 Air Cooling
13.6.2 Water Cooling
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Temperature & Humidity Test Chamber Market Size Forecast by Applications
13.10.1 Automotive
13.10.2 Aerospace
13.10.3 Electronics
13.10.4 Pharmaceutical
13.10.5 Other
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Temperature & Humidity Test Chamber Market: Competitive Dashboard
14.2 Global Temperature & Humidity Test Chamber Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 ESPEC
14.3.2 Schunk Group
14.3.3 Thermotron
14.3.4 BINDER
14.3.5 Memmert
14.3.6 Angelantoni Test Technologies (ACS)
14.3.7 Thermal Product Solutions (TPS)
14.3.8 Climatic Testing Systems (CTS)
14.3.9 CME (CM Envirosystems)
14.3.10 Envsin
14.3.11 Russells Technical Products
14.3.12 Torontech
14.3.13 Scientific Climate Systems (SCS)
14.3.14 Hastest Solutions
14.3.15 KOMEG Technology
14.3.16 Equilam N.A.
14.3.17 Presto Testing Instruments
14.3.18 Associated Environmental Systems (AES)
14.3.19 Sanwood Environmental Chambers
14.3.20 Xi'an LIB Environmental Simulation
14.3.21 Shanghai Linpin
14.3.22 Guangdong GRANDE
14.3.23 Wewon Environmental Chambers
14.3.24 Gester Instruments
14.3.25 Terchy Environmental Technology