Market Overview:
The global light curing equipment market is expected to grow at a CAGR of 6.5% from 2018 to 2030. The growth in the market can be attributed to the increasing demand for LED light sources, UV curing and visible light curing sources in various applications such as electronics, medical, optical, printed circuit board (PCB), and general industries. In addition, the growing demand for lightweight and energy-efficient products is also contributing to the growth of this market. The LED light sources segment is expected to grow at a CAGR of 7.0% from 2018 to 2030 due to its advantages such as low power consumption, long life span, and high efficiency over other types of light sources.
Product Definition:
Light curing equipment is used to cure dental materials by using a light source. The importance of light curing equipment is that it cures the dental material quickly and efficiently.
LED Light Sources:
LED light sources are the most popular and preferred choice of lighting in the market. LED is an acronym for Light Emitting Diode, a semiconductor that emits light when powered. The three basic colors red, green and blue can be produced using LEDs; each color represents a different band or spectrum of wavelengths. White light is made from combining various hues: Red + Green gives yellow; Blue + Green gives cyan (cyanogenetic) white and so on.
UV Curing and Visible Light Curing Sources:
UV curing and visible light curing sources are used in light curing equipment. UV source is a high-intensity ultraviolet radiation that is applied to the material or surface for a certain time period; this process converts the material into a solid form. Visible light source includes LED, fluorescent lamps, High-Intensity Discharge (HID), and other sources of visible radiations such as sunlight, gas lamp etc.
Application Insights:
The general industries segment dominated the global light curing equipment market in 2017. This is attributed to rising demand for electrical and electronic components from various end-use industries, such as consumer electronics, medical devices and appliances, aerospace & defense industry. Electronics was the largest application segment of the global market in 2017 owing to increasing demand for LED-based products across different end-use applications including general lighting, backlighting for LCD/LED displays and UV curing systems used in production of semiconductors packaging materials.
Medical emerged as a prominent application segment during the forecast period owing to growing adoption of LEDs across surgical procedures due to their high efficiency compared to conventional fluorescent or incandescent lamps. Moreover, an increase in R&D activities pertaining curing equipment with advanced technologies that are more efficient than existing ones is expected fuel product demand over the next few years.
Regional Analysis:
Asia Pacific dominated the global light curing equipment market in 2016 and is expected to continue its dominance over the forecast period. The growth of this region can be attributed to increasing demand for electronic products, especially smartphones and laptops. China is one of the largest manufacturers of electronic products such as computers, mobile phones, LED TVs etc., which has increased the demand for light curing equipment in this country.
The growing medical sector in Asia Pacific countries such as India and China has led to an increase in investments by various pharmaceutical companies for manufacturing drugs using ceramic materials that require high temperature during processing methods similar to those used while manufacturing semiconductor devices. This has resulted into a rise in demand for UV/LED based light cureers across this region thereby boosting regional growth over the next eight years.
Growth Factors:
- Increasing demand for dental restoration and cosmetic dentistry procedures
- Growing awareness about the benefits of light curing equipment among dental professionals
- Technological advancements in light curing equipment that offer better performance and efficiency
- Rising demand from emerging markets such as China and India
- Growing number of dental clinics and laboratories
Scope Of The Report
Report Attributes
Report Details
Report Title
Light Curing Equipment Market Research Report
By Type
LED Light Sources, UV Curing and Visible Light Curing Sources
By Application
Electronics, Medical, Optical, Printed Circuit Board, General Industries
By Companies
3M, Henkel, OMRON, Dymax Corporation, American Ultraviolet, Nordson, Incure Inc., Excelitas Technologies Corp, Tangent Industries Inc., Loctite
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
139
Number of Tables & Figures
98
Customization Available
Yes, the report can be customized as per your need.
Global Light Curing Equipment Market Report Segments:
The global Light Curing Equipment market is segmented on the basis of:
Types
LED Light Sources, UV Curing and Visible Light Curing Sources
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Electronics, Medical, Optical, Printed Circuit Board, General Industries
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- 3M
- Henkel
- OMRON
- Dymax Corporation
- American Ultraviolet
- Nordson
- Incure Inc.
- Excelitas Technologies Corp
- Tangent Industries Inc.
- Loctite
Highlights of The Light Curing Equipment Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- LED Light Sources
- UV Curing and Visible Light Curing Sources
- By Application:
- Electronics
- Medical
- Optical
- Printed Circuit Board
- General Industries
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Light Curing Equipment Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Light curing equipment is a type of medical device used to speed up the healing process by using light energy. This equipment emits short-wavelength ultraviolet (UV) radiation, which helps to break down tissue and promote healing.
Some of the major companies in the light curing equipment market are 3M, Henkel, OMRON, Dymax Corporation, American Ultraviolet, Nordson, Incure Inc., Excelitas Technologies Corp, Tangent Industries Inc., Loctite.
The light curing equipment market is expected to grow at a compound annual growth rate of 6.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Light Curing Equipment Market Overview 4.1 Introduction 4.1.1 Market Taxonomy 4.1.2 Market Definition 4.1.3 Macro-Economic Factors Impacting the Market Growth 4.2 Light Curing Equipment Market Dynamics 4.2.1 Market Drivers 4.2.2 Market Restraints 4.2.3 Market Opportunity 4.3 Light Curing Equipment Market - Supply Chain Analysis 4.3.1 List of Key Suppliers 4.3.2 List of Key Distributors 4.3.3 List of Key Consumers 4.4 Key Forces Shaping the Light Curing Equipment Market 4.4.1 Bargaining Power of Suppliers 4.4.2 Bargaining Power of Buyers 4.4.3 Threat of Substitution 4.4.4 Threat of New Entrants 4.4.5 Competitive Rivalry 4.5 Global Light Curing Equipment Market Size & Forecast, 2018-2028 4.5.1 Light Curing Equipment Market Size and Y-o-Y Growth 4.5.2 Light Curing Equipment Market Absolute $ Opportunity
Chapter 5 Global Light Curing Equipment Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Light Curing Equipment Market Size Forecast by Type
5.2.1 LED Light Sources
5.2.2 UV Curing and Visible Light Curing Sources
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Light Curing Equipment Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Light Curing Equipment Market Size Forecast by Applications
6.2.1 Electronics
6.2.2 Medical
6.2.3 Optical
6.2.4 Printed Circuit Board
6.2.5 General Industries
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Light Curing Equipment Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Light Curing Equipment Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Light Curing Equipment Analysis and Forecast
9.1 Introduction
9.2 North America Light Curing Equipment Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Light Curing Equipment Market Size Forecast by Type
9.6.1 LED Light Sources
9.6.2 UV Curing and Visible Light Curing Sources
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Light Curing Equipment Market Size Forecast by Applications
9.10.1 Electronics
9.10.2 Medical
9.10.3 Optical
9.10.4 Printed Circuit Board
9.10.5 General Industries
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Light Curing Equipment Analysis and Forecast
10.1 Introduction
10.2 Europe Light Curing Equipment Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Light Curing Equipment Market Size Forecast by Type
10.6.1 LED Light Sources
10.6.2 UV Curing and Visible Light Curing Sources
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Light Curing Equipment Market Size Forecast by Applications
10.10.1 Electronics
10.10.2 Medical
10.10.3 Optical
10.10.4 Printed Circuit Board
10.10.5 General Industries
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Light Curing Equipment Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Light Curing Equipment Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Light Curing Equipment Market Size Forecast by Type
11.6.1 LED Light Sources
11.6.2 UV Curing and Visible Light Curing Sources
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Light Curing Equipment Market Size Forecast by Applications
11.10.1 Electronics
11.10.2 Medical
11.10.3 Optical
11.10.4 Printed Circuit Board
11.10.5 General Industries
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Light Curing Equipment Analysis and Forecast
12.1 Introduction
12.2 Latin America Light Curing Equipment Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Light Curing Equipment Market Size Forecast by Type
12.6.1 LED Light Sources
12.6.2 UV Curing and Visible Light Curing Sources
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Light Curing Equipment Market Size Forecast by Applications
12.10.1 Electronics
12.10.2 Medical
12.10.3 Optical
12.10.4 Printed Circuit Board
12.10.5 General Industries
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Light Curing Equipment Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Light Curing Equipment Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Light Curing Equipment Market Size Forecast by Type
13.6.1 LED Light Sources
13.6.2 UV Curing and Visible Light Curing Sources
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Light Curing Equipment Market Size Forecast by Applications
13.10.1 Electronics
13.10.2 Medical
13.10.3 Optical
13.10.4 Printed Circuit Board
13.10.5 General Industries
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Light Curing Equipment Market: Competitive Dashboard
14.2 Global Light Curing Equipment Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 3M
14.3.2 Henkel
14.3.3 OMRON
14.3.4 Dymax Corporation
14.3.5 American Ultraviolet
14.3.6 Nordson
14.3.7 Incure Inc.
14.3.8 Excelitas Technologies Corp
14.3.9 Tangent Industries Inc.
14.3.10 Loctite