Market Overview:
The global air intake manifold (AIM) market is estimated to be valued at US$ XX Mn in 2018 and is projected to reach US$ XX Mn by 2030, exhibiting a CAGR of X.X%. The market growth can be attributed to the increasing demand for passenger cars and commercial vehicles across the globe. The plastic manifold segment is expected to account for a major share of the global air intake manifold (AIM) market during the forecast period. This can be attributed to its low cost and lightweight nature as compared with metal manifolds. However, metal manifolds are expected to witness higher growth rates owing to their superior properties such as heat resistance and durability over plastic manifolds. Passenger cars are anticipated to account for a larger share of the global air intake manifold (AIM) market during the forecast period, followed by commercial vehicles.
Product Definition:
Air Intake Manifold is the part of an engine that directs air into the cylinders. It is typically made of cast aluminum and it bolted to the top of the engine. The AIM ensures that each cylinder receives an equal amount of air, which is necessary for proper combustion.
Plastic Manifold:
Plastic manifold is a device that consists of multiple tubes or pipes, which are connected by valves and joints. It's used in automotive applications to route the air intake and exhausts the outflow. The basic function of this device is to manage pressure fluctuations that occur when more than one pipe comes into contact with atmosphere at same time.
The AIM market has been witnessing growth on account of rising demand for performance cars across the globe, especially in countries such as U.
Metal Manifold:
Metal manifold is a device that consists of multiple tubes connected by valves. The air passes through the tubes in sequence and each tube has an intake valve and exhaust valve. This device increases power output by reducing turbocharger lag, thus enabling faster acceleration.
Application Insights:
Passenger cars application segment led the global air intake manifold (AIM) market in 2017 and is projected to maintain its dominance over the forecast period. The growth of this segment can be attributed to increasing sales of passenger cars, especially in developing countries such as China, India and Brazil. In addition, stringent government regulations on lowering vehicle emissions are expected to drive the demand for AIMs in commercial vehicles over the forecast period.
The use of plastic manifold has been prevalent owing to its low cost as compared with metal or composite type manifolds. However, recent studies have indicated that metal AIMs may offer better heat transfer performance than their plastic counterparts during high-temperature operations; this factor is likely to restrict their demand for passenger car applications only over the next few years.
Regional Analysis:
North America dominated the global market in 2017. The region is expected to maintain its position throughout the forecast period owing to increasing demand for passenger cars and light commercial vehicles. In addition, stringent government regulations regarding vehicular emissions are expected to drive product adoption across this region.
Asia Pacific is anticipated to witness significant growth over the next eight years owing to rising disposable income, improving standards of living, and increased consumer awareness about vehicle safety features in emerging countries such as India and China. Moreover, growing automotive production capacities across these economies are likely boost product sales over this period.
Growth Factors:
- Increasing demand for automobiles
- Technological advancements in AIMs
- Stringent emission norms by regulatory authorities
- Rising disposable income of consumers in developing countries
- Growing popularity of air intake systems among performance enthusiasts
Scope Of The Report
Report Attributes
Report Details
Report Title
Air Intake Manifold (AIM) Market Research Report
By Type
Plastic Manifold, Metal Manifold
By Application
Passenger Cars, Commercial Vehicles
By Companies
Mahle, Mann+Hummel, Sogefi, Aisin Seiki, Magneti Marelli, Keihin, Toyota Boshoku, Novares Group, Samvardhana MOtherson Group (SMG), Rochling Group, Mahle, Atlas Industries, Mikuni Corporation, INZI Controls, Zhejiang Boyi Technology
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
247
Number of Tables & Figures
173
Customization Available
Yes, the report can be customized as per your need.
Global Air Intake Manifold (AIM) Market Report Segments:
The global Air Intake Manifold (AIM) market is segmented on the basis of:
Types
Plastic Manifold, Metal Manifold
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Passenger Cars, Commercial Vehicles
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Mahle
- Mann+Hummel
- Sogefi
- Aisin Seiki
- Magneti Marelli
- Keihin
- Toyota Boshoku
- Novares Group
- Samvardhana MOtherson Group (SMG)
- Rochling Group
- Mahle
- Atlas Industries
- Mikuni Corporation
- INZI Controls
- Zhejiang Boyi Technology
Highlights of The Air Intake Manifold (AIM) Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Plastic Manifold
- Metal Manifold
- By Application:
- Passenger Cars
- Commercial Vehicles
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Air Intake Manifold (AIM) Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
An air intake manifold is a component of an engine that helps to draw air into the engine. The manifold typically has several openings that allow the air to enter the engine.
Some of the major companies in the air intake manifold (aim) market are Mahle, Mann+Hummel, Sogefi, Aisin Seiki, Magneti Marelli, Keihin, Toyota Boshoku, Novares Group, Samvardhana MOtherson Group (SMG), Rochling Group, Mahle, Atlas Industries, Mikuni Corporation, INZI Controls, Zhejiang Boyi Technology.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Air Intake Manifold (AIM) Market Overview 4.1 Introduction 4.1.1 Market Taxonomy 4.1.2 Market Definition 4.1.3 Macro-Economic Factors Impacting the Market Growth 4.2 Air Intake Manifold (AIM) Market Dynamics 4.2.1 Market Drivers 4.2.2 Market Restraints 4.2.3 Market Opportunity 4.3 Air Intake Manifold (AIM) Market - Supply Chain Analysis 4.3.1 List of Key Suppliers 4.3.2 List of Key Distributors 4.3.3 List of Key Consumers 4.4 Key Forces Shaping the Air Intake Manifold (AIM) Market 4.4.1 Bargaining Power of Suppliers 4.4.2 Bargaining Power of Buyers 4.4.3 Threat of Substitution 4.4.4 Threat of New Entrants 4.4.5 Competitive Rivalry 4.5 Global Air Intake Manifold (AIM) Market Size & Forecast, 2018-2028 4.5.1 Air Intake Manifold (AIM) Market Size and Y-o-Y Growth 4.5.2 Air Intake Manifold (AIM) Market Absolute $ Opportunity
Chapter 5 Global Air Intake Manifold (AIM) Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Air Intake Manifold (AIM) Market Size Forecast by Type
5.2.1 Plastic Manifold
5.2.2 Metal Manifold
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Air Intake Manifold (AIM) Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Air Intake Manifold (AIM) Market Size Forecast by Applications
6.2.1 Passenger Cars
6.2.2 Commercial Vehicles
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Air Intake Manifold (AIM) Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Air Intake Manifold (AIM) Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Air Intake Manifold (AIM) Analysis and Forecast
9.1 Introduction
9.2 North America Air Intake Manifold (AIM) Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Air Intake Manifold (AIM) Market Size Forecast by Type
9.6.1 Plastic Manifold
9.6.2 Metal Manifold
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Air Intake Manifold (AIM) Market Size Forecast by Applications
9.10.1 Passenger Cars
9.10.2 Commercial Vehicles
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Air Intake Manifold (AIM) Analysis and Forecast
10.1 Introduction
10.2 Europe Air Intake Manifold (AIM) Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Air Intake Manifold (AIM) Market Size Forecast by Type
10.6.1 Plastic Manifold
10.6.2 Metal Manifold
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Air Intake Manifold (AIM) Market Size Forecast by Applications
10.10.1 Passenger Cars
10.10.2 Commercial Vehicles
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Air Intake Manifold (AIM) Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Air Intake Manifold (AIM) Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Air Intake Manifold (AIM) Market Size Forecast by Type
11.6.1 Plastic Manifold
11.6.2 Metal Manifold
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Air Intake Manifold (AIM) Market Size Forecast by Applications
11.10.1 Passenger Cars
11.10.2 Commercial Vehicles
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Air Intake Manifold (AIM) Analysis and Forecast
12.1 Introduction
12.2 Latin America Air Intake Manifold (AIM) Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Air Intake Manifold (AIM) Market Size Forecast by Type
12.6.1 Plastic Manifold
12.6.2 Metal Manifold
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Air Intake Manifold (AIM) Market Size Forecast by Applications
12.10.1 Passenger Cars
12.10.2 Commercial Vehicles
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Air Intake Manifold (AIM) Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Air Intake Manifold (AIM) Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Air Intake Manifold (AIM) Market Size Forecast by Type
13.6.1 Plastic Manifold
13.6.2 Metal Manifold
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Air Intake Manifold (AIM) Market Size Forecast by Applications
13.10.1 Passenger Cars
13.10.2 Commercial Vehicles
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Air Intake Manifold (AIM) Market: Competitive Dashboard
14.2 Global Air Intake Manifold (AIM) Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Mahle
14.3.2 Mann+Hummel
14.3.3 Sogefi
14.3.4 Aisin Seiki
14.3.5 Magneti Marelli
14.3.6 Keihin
14.3.7 Toyota Boshoku
14.3.8 Novares Group
14.3.9 Samvardhana MOtherson Group (SMG)
14.3.10 Rochling Group
14.3.11 Mahle
14.3.12 Atlas Industries
14.3.13 Mikuni Corporation
14.3.14 INZI Controls
14.3.15 Zhejiang Boyi Technology