Market Overview:
The global portable vacuum anchor market is expected to grow at a CAGR of 5.5% during the forecast period from 2018 to 2030. The market growth can be attributed to the increasing demand for portable vacuum anchors in various applications such as aircraft & aerospace, construction, industrial and others. Additionally, the growing infrastructure development in emerging economies is also propelling the growth of the global portable vacuum anchor market. However, volatility in raw material prices may restrain the market growth during the forecast period.
Product Definition:
A portable vacuum anchor is a device that uses a vacuum to hold an object in place. The object is attached to the anchor, which is then attached to a vacuum source. When the vacuum is turned on, it pulls the object against the anchor and holds it in place.
With Air Bottle:
With air bottle, it’s usage and growth factor in portable vacuum anchor market. With air bottles, compressed air can be stored for a long time which is used to operate the equipment. It helps in saving the cost of electricity as well as reduces manual efforts. The compressed air that is stored in an Air Bottle gets released when a trigger is pressed on the bottle which acts as an activation signal to start up operation of equipment.
Without Air Bottle:
An air bottle is a device used to create and hold compressed air. It can be used as an alternative to the portable vacuum anchor in certain situations where it would be inappropriate or dangerous to use the portable vacuum anchor. The compressed air held by an air bottle has a constant pressure of 14.5 - 55 Psi and can deliver up to 30 minutes of continuous operation at high speed, depending on model specifications.
Application Insights:
The aircraft & aerospace application segment accounted for the largest market share in 2017 and is projected to expand at a CAGR of XX% over the forecast period. Portable vacuum anchor systems are used on commercial as well as military aircraft to maintain equilibrium during maneuvering or when the load changes its position in flight. The system uses an air bottle that is connected to a flexible hose, which is attached with two suction cups at either end, one for attaching it on vertical surfaces and another for attaching it on horizontal surfaces.
Construction application segment was valued over USD 100 million in 2017 owing to increasing construction activities globally especially after 2018 when compared with pre-recession levels of 2008-2009.
Regional Analysis:
North America dominated the global market in 2017 owing to the presence of a large number of aircraft manufacturers in the region. The U.S., being one of the most industrialized countries, is home to several leading vacuum manufacturers as well. Europe also held a significant share in terms of revenue and is expected to witness considerable growth over the forecast period due to increasing demand for portable vacuum anchors from construction and industrial applications. Asia Pacific is anticipated to register substantial growth over the coming years owing to rapid urbanization and growing consumer disposable income levels that are resulting in increased spending on household maintenance, repairs, remodeling activities etc.; all factors driving product demand.
Growth Factors:
- Increasing demand for portable vacuum anchors in the construction industry for installing temporary or permanent fixtures.
- Growing popularity of vacuum anchors as a safe and efficient alternative to traditional methods of installation such as drilling and bolting.
- Rising awareness about the benefits of using portable vacuum anchors among consumers, contractors, and builders alike.
Scope Of The Report
Report Attributes
Report Details
Report Title
Portable Vacuum Anchor Market Research Report
By Type
With Air Bottle, Without Air Bottle
By Application
Aircraft & Aerospace, Construction, Industrial, Others
By Companies
M, MSA Safety Incorporated, Diversified Fall Protection
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
157
Number of Tables & Figures
110
Customization Available
Yes, the report can be customized as per your need.
Global Portable Vacuum Anchor Market Report Segments:
The global Portable Vacuum Anchor market is segmented on the basis of:
Types
With Air Bottle, Without Air Bottle
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Aircraft & Aerospace, Construction, Industrial, Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- M
- MSA Safety Incorporated
- Diversified Fall Protection
Highlights of The Portable Vacuum Anchor Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- With Air Bottle
- Without Air Bottle
- By Application:
- Aircraft & Aerospace
- Construction
- Industrial
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Portable Vacuum Anchor Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
A Portable Vacuum Anchor is a small, lightweight device that can be attached to the end of a vacuum cleaner hose to help keep the vacuum cleaner from being pulled away by strong winds or other forces.
Some of the major companies in the portable vacuum anchor market are M, MSA Safety Incorporated, Diversified Fall Protection.
The portable vacuum anchor market is expected to grow at a compound annual growth rate of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Portable Vacuum Anchor Market Overview 4.1 Introduction 4.1.1 Market Taxonomy 4.1.2 Market Definition 4.1.3 Macro-Economic Factors Impacting the Market Growth 4.2 Portable Vacuum Anchor Market Dynamics 4.2.1 Market Drivers 4.2.2 Market Restraints 4.2.3 Market Opportunity 4.3 Portable Vacuum Anchor Market - Supply Chain Analysis 4.3.1 List of Key Suppliers 4.3.2 List of Key Distributors 4.3.3 List of Key Consumers 4.4 Key Forces Shaping the Portable Vacuum Anchor Market 4.4.1 Bargaining Power of Suppliers 4.4.2 Bargaining Power of Buyers 4.4.3 Threat of Substitution 4.4.4 Threat of New Entrants 4.4.5 Competitive Rivalry 4.5 Global Portable Vacuum Anchor Market Size & Forecast, 2020-2028 4.5.1 Portable Vacuum Anchor Market Size and Y-o-Y Growth 4.5.2 Portable Vacuum Anchor Market Absolute $ Opportunity
Chapter 5 Global Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Market Size Forecast by Type
5.2.1 With Air Bottle
5.2.2 Without Air Bottle
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Market Size Forecast by Applications
6.2.1 Aircraft & Aerospace
6.2.2 Construction
6.2.3 Industrial
6.2.4 Others
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Portable Vacuum Anchor Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Portable Vacuum Anchor Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Analysis and Forecast
9.1 Introduction
9.2 North America Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Market Size Forecast by Type
9.6.1 With Air Bottle
9.6.2 Without Air Bottle
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Market Size Forecast by Applications
9.10.1 Aircraft & Aerospace
9.10.2 Construction
9.10.3 Industrial
9.10.4 Others
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Analysis and Forecast
10.1 Introduction
10.2 Europe Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Market Size Forecast by Type
10.6.1 With Air Bottle
10.6.2 Without Air Bottle
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Market Size Forecast by Applications
10.10.1 Aircraft & Aerospace
10.10.2 Construction
10.10.3 Industrial
10.10.4 Others
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Market Size Forecast by Type
11.6.1 With Air Bottle
11.6.2 Without Air Bottle
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Market Size Forecast by Applications
11.10.1 Aircraft & Aerospace
11.10.2 Construction
11.10.3 Industrial
11.10.4 Others
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Analysis and Forecast
12.1 Introduction
12.2 Latin America Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Market Size Forecast by Type
12.6.1 With Air Bottle
12.6.2 Without Air Bottle
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Market Size Forecast by Applications
12.10.1 Aircraft & Aerospace
12.10.2 Construction
12.10.3 Industrial
12.10.4 Others
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Market Size Forecast by Type
13.6.1 With Air Bottle
13.6.2 Without Air Bottle
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Market Size Forecast by Applications
13.10.1 Aircraft & Aerospace
13.10.2 Construction
13.10.3 Industrial
13.10.4 Others
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Portable Vacuum Anchor Market: Competitive Dashboard
14.2 Global Portable Vacuum Anchor Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 M
14.3.2 MSA Safety Incorporated
14.3.3 Diversified Fall Protection