The global die and mould market is expected to grow at a CAGR of 4.5% during the forecast period, from 2021 to 2030. The automotive industry is the largest end-user of dies and moulds, accounting for over 40% of the total demand in 2018. The automotive industry is expected to continue its dominance in the coming years, with an estimated share of 45% by 2030. The demand for dies and moulds in other industries such as household appliance manufacturing and IT industry are also projected to grow at a CAGR of 5%.
- The growth of the die and mould market is driven by the increasing demand for new products in various industries.
- The growth of the die and mould market is also driven by the need to replace old dies and moulds that are no longer functional or cost-effective to repair.
- The growth of the die and mould market is also driven by an increase in demand for more complex products, which require more sophisticated dies and molds to manufacture them.
- The growth of the die and mould market is also driven by an increase in demand for small batch production, which requires smaller dies or molds than those used for mass production, as well as a decrease in lead times between design changes on a product, which requires faster turnaround time on new dies or molds that can be made quickly with less tooling costs involved than those required for large batches of products with long lead times between design changes on a product.
- Finally, there has been an increased interest from investors into this industry due to its high profitability.
Industry Growth Insights published a new data on “Die and Mould Market”. The research report is titled “Die and Mould Market research by Types (Automotive Mould, Tire Mould, Moulds for IT Industry, Moulds for Household Appliance Industry), By Applications (Automotive, Industry, Manufacture, Others), By Players/Companies Nypro, Ogihara, Adval Tech, Hella, Roeders, Chengfei Integration Technology, Greatoo Molds, Tongling Zhongfa Suntech, Motor Dies, Changhong Technology, Himile Mechanical Science and Technology”.
Scope Of The Report
Report Attributes
Report Details
Report Title
Die and Mould Market Research Report
By Type
Automotive Mould, Tire Mould, Moulds for IT Industry, Moulds for Household Appliance Industry
By Application
Automotive, Industry, Manufacture, Others
By Companies
Nypro, Ogihara, Adval Tech, Hella, Roeders, Chengfei Integration Technology, Greatoo Molds, Tongling Zhongfa Suntech, Motor Dies, Changhong Technology, Himile Mechanical Science and Technology
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
235
Number of Tables & Figures
165
Customization Available
Yes, the report can be customized as per your need.
Global Die and Mould Market Report Segments:
The global Die and Mould market is segmented on the basis of:
Types
Automotive Mould, Tire Mould, Moulds for IT Industry, Moulds for Household Appliance Industry
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Automotive, Industry, Manufacture, Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Nypro
- Ogihara
- Adval Tech
- Hella
- Roeders
- Chengfei Integration Technology
- Greatoo Molds
- Tongling Zhongfa Suntech
- Motor Dies
- Changhong Technology
- Himile Mechanical Science and Technology
Highlights of The Die and Mould Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Automotive Mould
- Tire Mould
- Moulds for IT Industry
- Moulds for Household Appliance Industry
- By Application:
- Automotive
- Industry
- Manufacture
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Die and Mould Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Die and mould are two manufacturing processes used to create objects from a single piece of metal. In die forging, the metal is heated until it becomes malleable, then formed into a desired shape by pressing and rolling it. In moulding, the molten metal is poured into a cavity in one or more pieces of pre-made steel or plastic molds. The molds are then cooled and released to form the finished product.
Some of the key players operating in the die and mould market are Nypro, Ogihara, Adval Tech, Hella, Roeders, Chengfei Integration Technology, Greatoo Molds, Tongling Zhongfa Suntech, Motor Dies, Changhong Technology, Himile Mechanical Science and Technology.
The die and mould market is expected to grow at a compound annual growth rate of 4.5%.
1. Executive Summary
2. Assumptions and Acronyms Used
3. Research Methodology
4. Die and Mould Market Overview
4.1. Introduction
4.1.1. Market Taxonomy
4.1.2. Market Definition
4.2. Macro-Economic Factors
4.2.1. Industry Outlook
4.3. Die and Mould Market Dynamics
4.3.1. Market Drivers
4.3.2. Market Restraints
4.3.3. Opportunity
4.3.4. Market Trends
4.4. Die and Mould Market - Supply Chain
4.5. Global Die and Mould Market Forecast
4.5.1. Die and Mould Market Size (US$ Mn) and Y-o-Y Growth
4.5.2. Die and Mould Market Size (000 Units) and Y-o-Y Growth
4.5.3. Die and Mould Market Absolute $ Opportunity
5. Global Die and Mould Market Analysis and Forecast by Type
5.1. Market Trends
5.2. Introduction
5.2.1. Basis Point Share (BPS) Analysis by Type
5.2.2. Y-o-Y Growth Projections by Type
5.3. Die and Mould Market Size and Volume Forecast by Type
5.3.1. Automotive Mould
5.3.2. Tire Mould
5.3.3. Moulds for IT Industry
5.3.4. Moulds for Household Appliance Industry
5.4. Absolute $ Opportunity Assessment by Type
5.5. Market Attractiveness/Growth Potential Analysis by Type
6. Global Die and Mould Market Analysis and Forecast by Application
6.1. Market Trends
6.2. Introduction
6.2.1. Basis Point Share (BPS) Analysis by Application
6.2.2. Y-o-Y Growth Projections by Application
6.3. Die and Mould Market Size and Volume Forecast by Application
6.3.1. Automotive
6.3.2. Industry
6.3.3. Manufacture
6.3.4. Others
6.4. Absolute $ Opportunity Assessment by Application
6.5. Market Attractiveness/Growth Potential Analysis by Application
7. Global Die and Mould Market Analysis and Forecast by Sales Channel
7.1. Market Trends
7.2. Introduction
7.2.1. Basis Point Share (BPS) Analysis by Sales Channel
7.2.2. Y-o-Y Growth Projections by Sales Channel
7.3. Die and Mould Market Size and Volume Forecast by Sales Channel
7.3.1. Manufacturer/Distributor/Service Provider
7.3.2. Aftermarket
7.4. Absolute $ Opportunity Assessment by Sales Channel
7.5. Market Attractiveness/Growth Potential Analysis by Sales Channel
8. Global Die and Mould Market Analysis and Forecast by Region
8.1. Market Trends
8.2. Introduction
8.2.1. Basis Point Share (BPS) Analysis by Region
8.2.2. Y-o-Y Growth Projections by Region
8.3. Die and Mould Market Size and Volume Forecast by Region
8.3.1. North America
8.3.2. Latin America
8.3.3. Europe
8.3.4. Asia Pacific
8.3.5. Middle East and Africa (MEA)
8.4. Absolute $ Opportunity Assessment by Region
8.5. Market Attractiveness/Growth Potential Analysis by Region
8.6. Global Die and Mould Demand Share Forecast, 2019-2029
9. North America Die and Mould Market Analysis and Forecast
9.1. Introduction
9.1.1. Basis Point Share (BPS) Analysis by Country
9.1.2. Y-o-Y Growth Projections by Country
9.2. North America Die and Mould Market Size and Volume Forecast by Country
9.2.1. U.S.
9.2.2. Canada
9.3. Absolute $ Opportunity Assessment by Country
9.4. North America Die and Mould Market Size and Volume Forecast by Application
9.4.1. Automotive
9.4.2. Industry
9.4.3. Manufacture
9.4.4. Others
9.5. Basis Point Share (BPS) Analysis by Application
9.6. Y-o-Y Growth Projections by Application
9.7. North America Die and Mould Market Size and Volume Forecast by Type
9.7.1. Automotive Mould
9.7.2. Tire Mould
9.7.3. Moulds for IT Industry
9.7.4. Moulds for Household Appliance Industry
9.8. Basis Point Share (BPS) Analysis by Type
9.9. Y-o-Y Growth Projections by Type
9.10. Market Attractiveness/Growth Potential Analysis
9.10.1. By Country
9.10.2. By Product Type
9.10.3. By Application
9.10.4. By Sales Channel
9.11. North America Die and Mould Demand Share Forecast, 2019-2029
10. Latin America Die and Mould Market Analysis and Forecast
10.1. Introduction
10.1.1. Basis Point Share (BPS) Analysis by Country
10.1.2. Y-o-Y Growth Projections by Country
10.1.3. Latin America Average Pricing Analysis
10.2. Latin America Die and Mould Market Size and Volume Forecast by Country
10.2.1. Brazil
10.2.2. Mexico
10.2.3. Rest of Latin America
10.3. Absolute $ Opportunity Assessment by Country
10.4. Latin America Die and Mould Market Size and Volume Forecast by Application
10.4.1. Automotive
10.4.2. Industry
10.4.3. Manufacture
10.4.4. Others
10.5. Basis Point Share (BPS) Analysis by Application
10.6. Y-o-Y Growth Projections by Application
10.7. Latin America Die and Mould Market Size and Volume Forecast by Type
10.7.1. Automotive Mould
10.7.2. Tire Mould
10.7.3. Moulds for IT Industry
10.7.4. Moulds for Household Appliance Industry
10.8. Basis Point Share (BPS) Analysis by Type
10.9. Y-o-Y Growth Projections by Type
10.10. Market Attractiveness/Growth Potential Analysis
10.10.1. By Country
10.10.2. By Product Type
10.10.3. By Application
10.10.4. By Sales Channel
10.11. Latin America Die and Mould Demand Share Forecast, 2019-2029
11. Europe Die and Mould Market Analysis and Forecast
11.1. Introduction
11.1.1. Basis Point Share (BPS) Analysis by Country
11.1.2. Y-o-Y Growth Projections by Country
11.1.3. Europe Average Pricing Analysis
11.2. Europe Die and Mould Market Size and Volume Forecast by Country
11.2.1. Germany
11.2.2. France
11.2.3. Italy
11.2.4. U.K.
11.2.5. Spain
11.2.6. Russia
11.2.7. Rest of Europe
11.3. Absolute $ Opportunity Assessment by Country
11.4. Europe Die and Mould Market Size and Volume Forecast by Application
11.4.1. Automotive
11.4.2. Industry
11.4.3. Manufacture
11.4.4. Others
11.5. Basis Point Share (BPS) Analysis by Application
11.6. Y-o-Y Growth Projections by Application
11.7. Europe Die and Mould Market Size and Volume Forecast by Type
11.7.1. Automotive Mould
11.7.2. Tire Mould
11.7.3. Moulds for IT Industry
11.7.4. Moulds for Household Appliance Industry
11.8. Basis Point Share (BPS) Analysis by Type
11.9. Y-o-Y Growth Projections by Type
11.10. Market Attractiveness/Growth Potential Analysis
11.10.1. By Country
11.10.2. By Product Type
11.10.3. By Application
11.10.4. By Sales Channel
11.11. Europe Die and Mould Demand Share, 2019-2029
12. Asia Pacific Die and Mould Market Analysis and Forecast
12.1. Introduction
12.1.1. Basis Point Share (BPS) Analysis by Country
12.1.2. Y-o-Y Growth Projections by Country
12.1.3. Asia Pacific Average Pricing Analysis
12.2. Asia Pacific Die and Mould Market Size and Volume Forecast by Country
12.2.1. China
12.2.2. Japan
12.2.3. South Korea
12.2.4. India
12.2.5. Australia
12.2.6. Rest of Asia Pacific (APAC)
12.3. Absolute $ Opportunity Assessment by Country
12.4. Asia Pacific Die and Mould Market Size and Volume Forecast by Application
12.4.1. Automotive
12.4.2. Industry
12.4.3. Manufacture
12.4.4. Others
12.5. Basis Point Share (BPS) Analysis by Application
12.6. Y-o-Y Growth Projections by Application
12.7. Asia Pacific Die and Mould Market Size and Volume Forecast by Type
12.7.1. Automotive Mould
12.7.2. Tire Mould
12.7.3. Moulds for IT Industry
12.7.4. Moulds for Household Appliance Industry
12.8. Basis Point Share (BPS) Analysis by Type
12.9. Y-o-Y Growth Projections by Type
12.10. Market Attractiveness/Growth Potential Analysis
12.10.1. By Country
12.10.2. By Product Type
12.10.3. By Application
12.10.4. By Sales Channel
12.11. Asia Pacific Die and Mould Demand Share, 2019-2029
13. Middle East & Africa Die and Mould Market Analysis and Forecast
13.1. Introduction
13.1.1. Basis Point Share (BPS) Analysis by Country
13.1.2. Y-o-Y Growth Projections by Country
13.1.3. Asia Pacific Average Pricing Analysis
13.2. Middle East & Africa Die and Mould Market Size and Volume Forecast by Country
13.2.1. Saudi Arabia
13.2.2. South Africa
13.2.3. UAE
13.2.4. Rest of Middle East & Africa (MEA)
13.3. Absolute $ Opportunity Assessment by Country
13.4. Middle East & Africa Die and Mould Market Size and Volume Forecast by Application
13.4.1. Automotive
13.4.2. Industry
13.4.3. Manufacture
13.4.4. Others
13.5. Basis Point Share (BPS) Analysis by Application
13.6. Y-o-Y Growth Projections by Application
13.7. Middle East & Africa Die and Mould Market Size and Volume Forecast by Type
13.7.1. Automotive Mould
13.7.2. Tire Mould
13.7.3. Moulds for IT Industry
13.7.4. Moulds for Household Appliance Industry
13.8. Basis Point Share (BPS) Analysis by Type
13.9. Y-o-Y Growth Projections by Type
13.10. Market Attractiveness/Growth Potential Analysis
13.10.1. By Country
13.10.2. By Product Type
13.10.3. By Application
13.10.4. By Sales Channel
13.11. Middle East & Africa Die and Mould Demand Share, 2019-2029
14. Competition Landscape
14.1. Global Die and Mould Market: Market Share Analysis
14.2. Die and Mould Distributors and Customers
14.3. Die and Mould Market: Competitive Dashboard
14.4. Company Profiles (Details Overview, Financials, Developments, Strategy)
14.4.1. Nypro
14.4.1.1. Overview
14.4.1.2. Financials
14.4.1.3. Developments
14.4.1.4. Strategic Outlook
14.4.2. Ogihara
14.4.2.1. Overview
14.4.2.2. Financials
14.4.2.3. Developments
14.4.2.4. Strategic Outlook
14.4.3. Adval Tech
14.4.3.1. Overview
14.4.3.2. Financials
14.4.3.3. Developments
14.4.3.4. Strategic Outlook
14.4.4. Hella
14.4.4.1. Overview
14.4.4.2. Financials
14.4.4.3. Developments
14.4.4.4. Strategic Outlook
14.4.5. Roeders
14.4.5.1. Overview
14.4.5.2. Financials
14.4.5.3. Developments
14.4.5.4. Strategic Outlook
14.4.6. Chengfei Integration Technology
14.4.6.1. Overview
14.4.6.2. Financials
14.4.6.3. Developments
14.4.6.4. Strategic Outlook
14.4.7. Greatoo Molds
14.4.7.1. Overview
14.4.7.2. Financials
14.4.7.3. Developments
14.4.7.4. Strategic Outlook
14.4.8. Tongling Zhongfa Suntech
14.4.8.1. Overview
14.4.8.2. Financials
14.4.8.3. Developments
14.4.8.4. Strategic Outlook
14.4.9. Motor Dies
14.4.9.1. Overview
14.4.9.2. Financials
14.4.9.3. Developments
14.4.9.4. Strategic Outlook
14.4.10. Changhong Technology
14.4.10.1. Overview
14.4.10.2. Financials
14.4.10.3. Developments
14.4.10.4. Strategic Outlook
14.4.11. Himile Mechanical Science and Technology
14.4.11.1. Overview
14.4.11.2. Financials
14.4.11.3. Developments
14.4.11.4. Strategic Outlook
14.4.12. COMPANY 12
14.4.12.1. Overview
14.4.12.2. Financials
14.4.12.3. Developments
14.4.12.4. Strategic Outlook
14.4.13. COMPANY 13
14.4.13.1. Overview
14.4.13.2. Financials
14.4.13.3. Developments
14.4.13.4. Strategic Outlook
14.4.14. COMPANY 14
14.4.14.1. Overview
14.4.14.2. Financials
14.4.14.3. Developments
14.4.14.4. Strategic Outlook
14.4.15. COMPANY 15
14.4.15.1. Overview
14.4.15.2. Financials
14.4.15.3. Developments
14.4.15.4. Strategic Outlook
14.4.16. COMPANY 16
14.4.16.1. Overview
14.4.16.2. Financials
14.4.16.3. Developments
14.4.16.4. Strategic Outlook
14.4.17. COMPANY 17
14.4.17.1. Overview
14.4.17.2. Financials
14.4.17.3. Developments
14.4.17.4. Strategic Outlook
14.4.18. COMPANY 18
14.4.18.1. Overview
14.4.18.2. Financials
14.4.18.3. Developments
14.4.18.4. Strategic Outlook
14.4.19. COMPANY 19
14.4.19.1. Overview
14.4.19.2. Financials
14.4.19.3. Developments
14.4.19.4. Strategic Outlook
14.4.20. COMPANY 20
14.4.20.1. Overview
14.4.20.2. Financials
14.4.20.3. Developments
14.4.20.4. Strategic Outlook
