Latest Update: Impact of current COVID-19 situation has been considered in this report while making the analysis.
Global Filling, Capping and Sealing Market by Type (Filling, Capping, Sealing), By Application (Beverage, Chemical, Others) And By Region (North America, Latin America, Europe, Asia Pacific and Middle East & Africa), Forecast From 2022 To 2030-report

Global Filling, Capping and Sealing Market by Type (Filling, Capping, Sealing), By Application (Beverage, Chemical, Others) And By Region (North America, Latin America, Europe, Asia Pacific and Middle East & Africa), Forecast From 2022 To 2030

Report ID: 136447 3300 Machinery & Equipment 377 244 Pages 4.7 (41)

Market Overview:

The global filling, capping and sealing market is expected to grow at a CAGR of 5.5% from 2018 to 2030. The growth in the market can be attributed to the increasing demand for packaged food and beverages, rising disposable income, and technological advancements in the packaging industry. In terms of type, the filling segment is expected to dominate the market during the forecast period owing to its wide application in various industries such as beverage, chemical, and others. In terms of region, North America is expected to lead the global filling, capping and sealing market during the forecast period followed by Europe due to rising demand for packaged food products in these regions.

Global Filling, Capping and Sealing Industry Outlook

Product Definition:

Filling, Capping and Sealing are the three main steps in the production process of beverage containers. Filling is the process of injecting a beverage into a container. The cap is applied to the top of the container to seal it and prevent leakage. The sealant is then applied over the cap to create an airtight closure and protect against contamination.


The global filling, capping and sealing market size was valued at USD 23.6 billion in 2016. The increasing demand for the product from various end-use industries such as food & beverages, pharmaceuticals and personal care is expected to drive the industry growth over the forecast period.

Filling machines are used for putting ingredients into containers of different sizes such as bottles, cans or pouches by using a syringe or a nozzle on top of a container.


Capping and its usage in Filling, Capping and Sealing market is covered under the general equipment category of machinery. It is used to fill liquid into containers or bottles cap it and then seal the container. The major application areas include food & beverage, pharmaceuticals, chemicals among others. Food & beverage industry dominates the global capping and filling machines market owing to high demand for caps from various applications such as beverages cans etc.

Application Insights:

The beverage application segment led the global market in 2017. This was attributed to increasing demand for carbonated soft drinks (CSD) and other beverages such as energy, sports and nutrition drinks. The growth of the beverage industry is expected to drive product demand over the forecast period.

The chemical application segment accounted for a significant share in 2017 due to high product utilization in industrial processes including pharmaceuticals, paints and coatings among others. In addition, rapid urbanization coupled with technological developments has facilitated easy access of consumers to markets which has resulted in increased consumption of consumer goods including food products such as jams/jellies/salsas among others which is anticipated to propel growth over the forecast period.

Regional Analysis:

Asia Pacific dominated the global market in 2017 and is expected to continue its dominance over the forecast period. The growth of this region can be attributed to rising demand from end-use industries such as chemical, others, and beverage. China is one of the largest producers of natural rubber globally owing to favorable weather conditions for plantation crops such as tea, coffee, rubber trees etc., which results in high production outputs.

China has a large number of small-scale manufacturers that cater primarily to domestic demand within China; however there exists significant potential for these manufacturers to export their products due to low costs associated with production in China. This will provide an opportunity for other countries/regions interested in investing or collaborating with Chinese companies/government who are looking at reducing their dependence on imports by increasing domestic production levels thus contributing towards regional growth over the next eight years.

North America was valued at USD X million in 2017.

Growth Factors:

  • Increasing demand for packaged food products: The global packaged food market is projected to grow at a CAGR of 5.4% from 2016 to 2021, reaching a value of USD 2,521.5 billion by 2021. This growth is attributed to the increasing urbanization and changing lifestyles in developing countries, coupled with rising disposable incomes.
  • Growing demand for convenience foods: Convenience foods are those that can be prepared or served quickly and easily, without much effort on the part of the consumer. They are generally ready-to-eat or ready-to-heat products that do not require any additional preparation time other than heating them up (if necessary). The growing demand for convenience foods is driven by the increasingly busy lifestyles of consumers worldwide.
  • Rising awareness about health and nutrition: There has been a growing awareness among consumers about the importance of healthy eating habits and good nutrition in recent years. This has led to an increase in demand for healthier food options, which in turn is driving growth in the global Filling, Capping and Sealing market .

Scope Of The Report

Report Attributes

Report Details

Report Title

Filling, Capping and Sealing Market Research Report

By Type

Filling, Capping, Sealing

By Application

Beverage, Chemical, Others

By Companies

Bosch, Sacmi Filling, IMA, Haver & Boecker, ProMach, Arpac, Mespack, ACG, MDC Engineering, Aagard

Regions Covered

North America, Europe, APAC, Latin America, MEA

Base Year


Historical Year

2019 to 2020 (Data from 2010 can be provided as per availability)

Forecast Year


Number of Pages


Number of Tables & Figures


Customization Available

Yes, the report can be customized as per your need.

Global Filling, Capping and Sealing Market Report Segments:

The global Filling, Capping and Sealing market is segmented on the basis of:


Filling, Capping, Sealing

The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.


Beverage, Chemical, Others

The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.

Some of the companies that are profiled in this report are:

  1. Bosch
  2. Sacmi Filling
  3. IMA
  4. Haver & Boecker
  5. ProMach
  6. Arpac
  7. Mespack
  8. ACG
  9. MDC Engineering
  10. Aagard

Global Filling, Capping and Sealing Market Overview

Highlights of The Filling, Capping and Sealing Market Report:

  1. The market structure and projections for the coming years.
  2. Drivers, restraints, opportunities, and current trends of market.
  3. Historical data and forecast.
  4. Estimations for the forecast period 2030.
  5. Developments and trends in the market.
  6. By Type:

    1. Filling
    2. Capping
    3. Sealing
  1. By Application:

    1. Beverage
    2. Chemical
    3. Others
  1. Market scenario by region, sub-region, and country.
  2. Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
  3. Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
  4. Government Policies, Macro & Micro economic factors are also included in the report.

We have studied the Filling, Capping and Sealing Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.

Regional Analysis

  • North America
  • Europe
  • Asia Pacific
  • Middle East & Africa
  • Latin America

Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.

The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.

How you may use our products:

  • Correctly Positioning New Products
  • Market Entry Strategies
  • Business Expansion Strategies
  • Consumer Insights
  • Understanding Competition Scenario
  • Product & Brand Management
  • Channel & Customer Management
  • Identifying Appropriate Advertising Appeals

Global Filling, Capping and Sealing Market Statistics

8 Reasons to Buy This Report

  1. Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
  2. Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
  3. Implemented Robust Methodology to Prepare the Report
  4. Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
  5. Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
  6. Provides Information About the Top-winning Strategies Implemented by Industry Players.
  7. In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
  8. Customization of the Report Available

Frequently Asked Questions?

Filling, capping and sealing are the three main steps in a manufacturing process. Filling is when the product is put into the container. Capping is when the top of the container is sealed shut. Sealing means that a chemical or heat sealant has been applied to create an airtight seal between two pieces of material.

Some of the major companies in the filling, capping and sealing market are Bosch, Sacmi Filling, IMA, Haver & Boecker, ProMach, Arpac, Mespack, ACG, MDC Engineering, Aagard.

The filling, capping and sealing market is expected to register a CAGR of 5.5%.

1. Executive Summary

2. Assumptions and Acronyms Used

3. Research Methodology

4. Filling, Capping and Sealing Market Overview
   4.1. Introduction
      4.1.1. Market Taxonomy
      4.1.2. Market Definition
   4.2. Macro-Economic Factors
      4.2.1. Industry Outlook
   4.3. Filling, Capping and Sealing Market Dynamics
      4.3.1. Market Drivers
      4.3.2. Market Restraints
      4.3.3. Opportunity
      4.3.4. Market Trends
   4.4. Filling, Capping and Sealing Market - Supply Chain
   4.5. Global Filling, Capping and Sealing Market Forecast
      4.5.1. Filling, Capping and Sealing Market Size (US$ Mn) and Y-o-Y Growth
      4.5.2. Filling, Capping and Sealing Market Size (000’ Units) and Y-o-Y Growth
      4.5.3. Filling, Capping and Sealing Market Absolute $ Opportunity

5. Global Filling, Capping and Sealing Market Analysis and Forecast by Type
   5.1. Market Trends
   5.2. Introduction
      5.2.1. Basis Point Share (BPS) Analysis by Type
      5.2.2. Y-o-Y Growth Projections by Type
   5.3. Filling, Capping and Sealing Market Size and Volume Forecast by Type
      5.3.1. Filling
      5.3.2. Capping
      5.3.3. Sealing
   5.4. Absolute $ Opportunity Assessment by Type
   5.5. Market Attractiveness/Growth Potential Analysis by Type

6. Global Filling, Capping and Sealing Market Analysis and Forecast by Application
   6.1. Market Trends
   6.2. Introduction
      6.2.1. Basis Point Share (BPS) Analysis by Application
      6.2.2. Y-o-Y Growth Projections by Application
   6.3. Filling, Capping and Sealing Market Size and Volume Forecast by Application
      6.3.1. Beverage
      6.3.2. Chemical
      6.3.3. Others
   6.4. Absolute $ Opportunity Assessment by Application
   6.5. Market Attractiveness/Growth Potential Analysis by Application

7. Global Filling, Capping and Sealing Market Analysis and Forecast by Sales Channel
   7.1. Market Trends
   7.2. Introduction
      7.2.1. Basis Point Share (BPS) Analysis by Sales Channel 
      7.2.2. Y-o-Y Growth Projections by Sales Channel
   7.3. Filling, Capping and Sealing Market Size and Volume Forecast by Sales Channel 
      7.3.1. Manufacturer/Distributor/Service Provider
      7.3.2. Aftermarket
   7.4. Absolute $ Opportunity Assessment by Sales Channel
   7.5. Market Attractiveness/Growth Potential Analysis by Sales Channel

8. Global Filling, Capping and Sealing Market Analysis and Forecast by Region
   8.1. Market Trends
   8.2. Introduction
      8.2.1. Basis Point Share (BPS) Analysis by Region
      8.2.2. Y-o-Y Growth Projections by Region
   8.3. Filling, Capping and Sealing Market Size and Volume Forecast by Region
      8.3.1. North America
      8.3.2. Latin America
      8.3.3. Europe
      8.3.4. Asia Pacific
      8.3.5. Middle East and Africa (MEA)
   8.4. Absolute $ Opportunity Assessment by Region
   8.5. Market Attractiveness/Growth Potential Analysis by Region
   8.6. Global Filling, Capping and Sealing Demand Share Forecast, 2019-2029

9. North America Filling, Capping and Sealing Market Analysis and Forecast
   9.1. Introduction
      9.1.1. Basis Point Share (BPS) Analysis by Country
      9.1.2. Y-o-Y Growth Projections by Country
   9.2. North America Filling, Capping and Sealing Market Size and Volume Forecast by Country
      9.2.1. U.S.
      9.2.2. Canada
   9.3. Absolute $ Opportunity Assessment by Country
   9.4. North America Filling, Capping and Sealing Market Size and Volume Forecast by Application
      9.4.1. Beverage
      9.4.2. Chemical
      9.4.3. Others
   9.5. Basis Point Share (BPS) Analysis by Application
   9.6. Y-o-Y Growth Projections by Application
   9.7. North America Filling, Capping and Sealing Market Size and Volume Forecast by Type
      9.7.1. Filling
      9.7.2. Capping
      9.7.3. Sealing
   9.8. Basis Point Share (BPS) Analysis by Type
   9.9. Y-o-Y Growth Projections by Type
   9.10. Market Attractiveness/Growth Potential Analysis
      9.10.1. By Country
      9.10.2. By Product Type
      9.10.3. By Application
      9.10.4. By Sales Channel
   9.11. North America Filling, Capping and Sealing Demand Share Forecast, 2019-2029

10. Latin America Filling, Capping and Sealing Market Analysis and Forecast
   10.1. Introduction
      10.1.1. Basis Point Share (BPS) Analysis by Country
      10.1.2. Y-o-Y Growth Projections by Country
      10.1.3. Latin America Average Pricing Analysis
   10.2. Latin America Filling, Capping and Sealing Market Size and Volume Forecast by Country
      10.2.1. Brazil
      10.2.2. Mexico
      10.2.3. Rest of Latin America
   10.3. Absolute $ Opportunity Assessment by Country
   10.4. Latin America Filling, Capping and Sealing Market Size and Volume Forecast by Application
      10.4.1. Beverage
      10.4.2. Chemical
      10.4.3. Others
   10.5. Basis Point Share (BPS) Analysis by Application
   10.6. Y-o-Y Growth Projections by Application
   10.7. Latin America Filling, Capping and Sealing Market Size and Volume Forecast by Type
      10.7.1. Filling
      10.7.2. Capping
      10.7.3. Sealing
   10.8. Basis Point Share (BPS) Analysis by Type
   10.9. Y-o-Y Growth Projections by Type
   10.10. Market Attractiveness/Growth Potential Analysis
      10.10.1. By Country
      10.10.2. By Product Type
      10.10.3. By Application
      10.10.4. By Sales Channel
   10.11. Latin America Filling, Capping and Sealing Demand Share Forecast, 2019-2029

11. Europe Filling, Capping and Sealing Market Analysis and Forecast
   11.1. Introduction
      11.1.1. Basis Point Share (BPS) Analysis by Country
      11.1.2. Y-o-Y Growth Projections by Country
      11.1.3. Europe Average Pricing Analysis
   11.2. Europe Filling, Capping and Sealing Market Size and Volume Forecast by Country
      11.2.1. Germany
      11.2.2. France
      11.2.3. Italy
      11.2.4. U.K.
      11.2.5. Spain
      11.2.6. Russia
      11.2.7. Rest of Europe
   11.3. Absolute $ Opportunity Assessment by Country
   11.4. Europe Filling, Capping and Sealing Market Size and Volume Forecast by Application
      11.4.1. Beverage
      11.4.2. Chemical
      11.4.3. Others
   11.5. Basis Point Share (BPS) Analysis by Application
   11.6. Y-o-Y Growth Projections by Application
   11.7. Europe Filling, Capping and Sealing Market Size and Volume Forecast by Type
      11.7.1. Filling
      11.7.2. Capping
      11.7.3. Sealing
   11.8. Basis Point Shae (BPS) Analysis by Type
   11.9. Y-o-Y Growth Projections by Type
   11.10. Market Attractiveness/Growth Potential Analysis
      11.10.1. By Country
      11.10.2. By Product Type
      11.10.3. By Application
      11.10.4. By Sales Channel
   11.11. Europe Filling, Capping and Sealing Demand Share, 2019-2029

12. Asia Pacific Filling, Capping and Sealing Market Analysis and Forecast
   12.1. Introduction
      12.1.1. Basis Point Share (BPS) Analysis by Country
      12.1.2. Y-o-Y Growth Projections by Country
      12.1.3. Asia Pacific Average Pricing Analysis
   12.2. Asia Pacific Filling, Capping and Sealing Market Size and Volume Forecast by Country
      12.2.1. China
      12.2.2. Japan
      12.2.3. South Korea
      12.2.4. India
      12.2.5. Australia
      12.2.6. Rest of Asia Pacific (APAC)
   12.3. Absolute $ Opportunity Assessment by Country
   12.4. Asia Pacific Filling, Capping and Sealing Market Size and Volume Forecast by Application
      12.4.1. Beverage
      12.4.2. Chemical
      12.4.3. Others
   12.5. Basis Point Share (BPS) Analysis by Application
   12.6. Y-o-Y Growth Projections by Application
   12.7. Asia Pacific Filling, Capping and Sealing Market Size and Volume Forecast by Type
      12.7.1. Filling
      12.7.2. Capping
      12.7.3. Sealing
   12.8. Basis Point Share (BPS) Analysis by Type
   12.9. Y-o-Y Growth Projections by Type
   12.10. Market Attractiveness/Growth Potential Analysis
      12.10.1. By Country
      12.10.2. By Product Type
      12.10.3. By Application
      12.10.4. By Sales Channel
   12.11. Asia Pacific Filling, Capping and Sealing Demand Share, 2019-2029

13. Middle East & Africa Filling, Capping and Sealing Market Analysis and Forecast
   13.1. Introduction
      13.1.1. Basis Point Share (BPS) Analysis by Country
      13.1.2. Y-o-Y Growth Projections by Country
      13.1.3. Asia Pacific Average Pricing Analysis
   13.2. Middle East & Africa Filling, Capping and Sealing Market Size and Volume Forecast by Country
      13.2.1. Saudi Arabia
      13.2.2. South Africa
      13.2.3. UAE
      13.2.4. Rest of Middle East & Africa (MEA)
   13.3. Absolute $ Opportunity Assessment by Country
   13.4. Middle East & Africa Filling, Capping and Sealing Market Size and Volume Forecast by Application
      13.4.1. Beverage
      13.4.2. Chemical
      13.4.3. Others
   13.5. Basis Point Share (BPS) Analysis by Application
   13.6. Y-o-Y Growth Projections by Application
   13.7. Middle East & Africa Filling, Capping and Sealing Market Size and Volume Forecast by Type
      13.7.1. Filling
      13.7.2. Capping
      13.7.3. Sealing
   13.8. Basis Point Share (BPS) Analysis by Type
   13.9. Y-o-Y Growth Projections by Type
   13.10. Market Attractiveness/Growth Potential Analysis
      13.10.1. By Country
      13.10.2. By Product Type
      13.10.3. By Application
      13.10.4. By Sales Channel
   13.11. Middle East & Africa Filling, Capping and Sealing Demand Share, 2019-2029

14. Competition Landscape
   14.1. Global Filling, Capping and Sealing Market: Market Share Analysis
   14.2. Filling, Capping and Sealing Distributors and Customers
   14.3. Filling, Capping and Sealing Market: Competitive Dashboard
   14.4. Company Profiles (Details – Overview, Financials, Developments, Strategy) 
      14.4.1. Bosch Overview Financials Developments Strategic Outlook
      14.4.2. Sacmi Filling Overview Financials Developments Strategic Outlook
      14.4.3. IMA Overview Financials Developments Strategic Outlook
      14.4.4. Haver & Boecker Overview Financials Developments Strategic Outlook
      14.4.5. ProMach Overview Financials Developments Strategic Outlook
      14.4.6. Arpac Overview Financials Developments Strategic Outlook
      14.4.7. Mespack Overview Financials Developments Strategic Outlook
      14.4.8. ACG Overview Financials Developments Strategic Outlook
      14.4.9. MDC Engineering Overview Financials Developments Strategic Outlook
      14.4.10. Aagard Overview Financials Developments Strategic Outlook
      14.4.11. COMPANY 11 Overview Financials Developments Strategic Outlook
      14.4.12. COMPANY 12 Overview Financials Developments Strategic Outlook
      14.4.13. COMPANY 13 Overview Financials Developments Strategic Outlook
      14.4.14. COMPANY 14 Overview Financials Developments Strategic Outlook
      14.4.15. COMPANY 15 Overview Financials Developments Strategic Outlook
      14.4.16. COMPANY 16 Overview Financials Developments Strategic Outlook
      14.4.17. COMPANY 17 Overview Financials Developments Strategic Outlook
      14.4.18. COMPANY 18 Overview Financials Developments Strategic Outlook
      14.4.19. COMPANY 19 Overview Financials Developments Strategic Outlook
      14.4.20. COMPANY 20 Overview Financials Developments Strategic Outlook

Our Trusted Clients

Contact Us