Market Overview:
The global fluid conveyance products motors market is expected to grow at a CAGR of 5.5% during the forecast period from 2018 to 2030. The growth in this market can be attributed to the increasing demand for fluid conveyance products in various end-use industries such as aerospace, construction, agriculture, mining, waste water treatment and automobile. In addition, the growing demand for electric vehicles is also contributing to the growth of this market. On the basis of type, tubes/pipes are expected to account for a major share of the global fluid conveyance products motors market during the forecast period from 2018 to 2030. This can be attributed to their high efficiency and low maintenance requirements as compared with other types of motors available in this market.
Product Definition:
A fluid conveyance product motor is a device used to power the movement of fluids through tubes and pipes. The importance of fluid conveyance products motors lies in their ability to move large quantities of fluid quickly and efficiently, making them an essential component of many industrial and commercial applications.
Tubes/Pipes:
Tubes/Pipes, it's usage.
The global tubes/pipes, it's usage and growth factor in fluid conveyance products motors market size was valued at USD 1.5 billion in 2016.
High Pressure Ducts:
High pressure ducts are used in fluid conveyance products motors to provide a means of conveying fluids without the need for direct contact between the source and destination points. The high-pressure ducts transfer fluids by using suction or gravity, or a combination of both, through an open system that is made up of channels and valves. These systems can be installed at different levels in vertical as well as horizontal flow lines.
Application Insights:
The construction industry was the largest application segment in 2016 and is expected to witness significant growth over the forecast period. The growth can be attributed to increasing demand for advanced infrastructure facilities, rapid urbanization, and rise in infrastructural activities across the globe.
Construction equipment manufacturers are investing significantly in research & development activities pertaining to electric motors owing to their high efficiency at low cost which is likely to drive fluid conveyance products motors market over the forecast period.
Aerospace is one of those industries that require a large number of precision-made components which involve various types of fluids such as hydraulic oil, coolants & lubricants along with other chemicals and gases under pressure. These aforementioned factors are anticipated to propel product demand from aerospace applications over the next eight years or so.
Regional Analysis:
North America dominated the global market in 2017 owing to the presence of a large number of manufacturers and OEMs. The region is expected to maintain its dominance over the forecast period, with Europe coming in second and Asia Pacific third. This can be attributed to increasing government initiatives for using alternative energy sources for industrial applications coupled with growing environmental concerns regarding carbon emissions from conventional power plants.
Asia Pacific is projected to witness significant growth over the forecast period owing to rising demand from end-use industries such as automotive, mining, waste water treatment, and others. Fluid conveyance products motors are used extensively in mining applications due their abilityto withstand high pressure fluctuations associated with deep shaft drilling operations without damage or leakage of lubricants or other fluids contained within them.
Growth Factors:
- Increasing demand from the end-user industries for fluid conveyance products motors
- Growing urbanization and industrialization in developing countries
- Rising investments in research and development by fluid conveyance products motors manufacturers to develop new and innovative products
- Proliferation of online retail platforms that offer a wide range of fluid conveyance products motors at competitive prices
- Growing awareness about the benefits of using energy-efficient fluid conveyance products motors
Scope Of The Report
Report Attributes
Report Details
Report Title
Fluid Conveyance Products Motors Market Research Report
By Type
Tubes/Pipes, High Pressure Ducts, Low Pressure Ducts
By Application
Aerospace, Construction, Agriculture, Mining, Waste Water Treatment, Automobile, Others
By Companies
Eaton Corporation, Parker Hannifin Corp, Unison, Ideal Plm, Sabo Group, Leading Edge Hydraulics, Metline Industries, GHX Industrial, Pressure Lift Corporation, Senior PlC.
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
244
Number of Tables & Figures
171
Customization Available
Yes, the report can be customized as per your need.
Global Fluid Conveyance Products Motors Market Report Segments:
The global Fluid Conveyance Products Motors market is segmented on the basis of:
Types
Tubes/Pipes, High Pressure Ducts, Low Pressure Ducts
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Aerospace, Construction, Agriculture, Mining, Waste Water Treatment, Automobile, Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Eaton Corporation
- Parker Hannifin Corp
- Unison
- Ideal Plm
- Sabo Group
- Leading Edge Hydraulics
- Metline Industries
- GHX Industrial
- Pressure Lift Corporation
- Senior PlC.
Highlights of The Fluid Conveyance Products Motors Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Tubes/Pipes
- High Pressure Ducts
- Low Pressure Ducts
- By Application:
- Aerospace
- Construction
- Agriculture
- Mining
- Waste Water Treatment
- Automobile
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Fluid Conveyance Products Motors Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Fluid conveyance products motors are used in a variety of industrial and commercial applications, such as food processing, pharmaceuticals, chemical production and printing. These motors typically use a fluid to power the movement of objects or materials through an enclosed space.
Some of the major companies in the fluid conveyance products motors market are Eaton Corporation, Parker Hannifin Corp, Unison, Ideal Plm, Sabo Group, Leading Edge Hydraulics, Metline Industries, GHX Industrial, Pressure Lift Corporation, Senior PlC..
The fluid conveyance products motors market is expected to grow at a compound annual growth rate of 5.5%.
1. Executive Summary
2. Assumptions and Acronyms Used
3. Research Methodology
4. Fluid Conveyance Products Motors Market Overview
4.1. Introduction
4.1.1. Market Taxonomy
4.1.2. Market Definition
4.2. Macro-Economic Factors
4.2.1. Industry Outlook
4.3. Fluid Conveyance Products Motors Market Dynamics
4.3.1. Market Drivers
4.3.2. Market Restraints
4.3.3. Opportunity
4.3.4. Market Trends
4.4. Fluid Conveyance Products Motors Market - Supply Chain
4.5. Global Fluid Conveyance Products Motors Market Forecast
4.5.1. Fluid Conveyance Products Motors Market Size (US$ Mn) and Y-o-Y Growth
4.5.2. Fluid Conveyance Products Motors Market Size (000 Units) and Y-o-Y Growth
4.5.3. Fluid Conveyance Products Motors Market Absolute $ Opportunity
5. Global Fluid Conveyance Products Motors Market Analysis and Forecast by Type
5.1. Market Trends
5.2. Introduction
5.2.1. Basis Point Share (BPS) Analysis by Type
5.2.2. Y-o-Y Growth Projections by Type
5.3. Fluid Conveyance Products Motors Market Size and Volume Forecast by Type
5.3.1. Tubes/Pipes
5.3.2. High Pressure Ducts
5.3.3. Low Pressure Ducts
5.4. Absolute $ Opportunity Assessment by Type
5.5. Market Attractiveness/Growth Potential Analysis by Type
6. Global Fluid Conveyance Products Motors Market Analysis and Forecast by Application
6.1. Market Trends
6.2. Introduction
6.2.1. Basis Point Share (BPS) Analysis by Application
6.2.2. Y-o-Y Growth Projections by Application
6.3. Fluid Conveyance Products Motors Market Size and Volume Forecast by Application
6.3.1. Aerospace
6.3.2. Construction
6.3.3. Agriculture
6.3.4. Mining
6.3.5. Waste Water Treatment
6.3.6. Automobile
6.3.7. Others
6.4. Absolute $ Opportunity Assessment by Application
6.5. Market Attractiveness/Growth Potential Analysis by Application
7. Global Fluid Conveyance Products Motors Market Analysis and Forecast by Sales Channel
7.1. Market Trends
7.2. Introduction
7.2.1. Basis Point Share (BPS) Analysis by Sales Channel
7.2.2. Y-o-Y Growth Projections by Sales Channel
7.3. Fluid Conveyance Products Motors Market Size and Volume Forecast by Sales Channel
7.3.1. Manufacturer/Distributor/Service Provider
7.3.2. Aftermarket
7.4. Absolute $ Opportunity Assessment by Sales Channel
7.5. Market Attractiveness/Growth Potential Analysis by Sales Channel
8. Global Fluid Conveyance Products Motors Market Analysis and Forecast by Region
8.1. Market Trends
8.2. Introduction
8.2.1. Basis Point Share (BPS) Analysis by Region
8.2.2. Y-o-Y Growth Projections by Region
8.3. Fluid Conveyance Products Motors Market Size and Volume Forecast by Region
8.3.1. North America
8.3.2. Latin America
8.3.3. Europe
8.3.4. Asia Pacific
8.3.5. Middle East and Africa (MEA)
8.4. Absolute $ Opportunity Assessment by Region
8.5. Market Attractiveness/Growth Potential Analysis by Region
8.6. Global Fluid Conveyance Products Motors Demand Share Forecast, 2019-2029
9. North America Fluid Conveyance Products Motors Market Analysis and Forecast
9.1. Introduction
9.1.1. Basis Point Share (BPS) Analysis by Country
9.1.2. Y-o-Y Growth Projections by Country
9.2. North America Fluid Conveyance Products Motors Market Size and Volume Forecast by Country
9.2.1. U.S.
9.2.2. Canada
9.3. Absolute $ Opportunity Assessment by Country
9.4. North America Fluid Conveyance Products Motors Market Size and Volume Forecast by Application
9.4.1. Aerospace
9.4.2. Construction
9.4.3. Agriculture
9.4.4. Mining
9.4.5. Waste Water Treatment
9.4.6. Automobile
9.4.7. Others
9.5. Basis Point Share (BPS) Analysis by Application
9.6. Y-o-Y Growth Projections by Application
9.7. North America Fluid Conveyance Products Motors Market Size and Volume Forecast by Type
9.7.1. Tubes/Pipes
9.7.2. High Pressure Ducts
9.7.3. Low Pressure Ducts
9.8. Basis Point Share (BPS) Analysis by Type
9.9. Y-o-Y Growth Projections by Type
9.10. Market Attractiveness/Growth Potential Analysis
9.10.1. By Country
9.10.2. By Product Type
9.10.3. By Application
9.10.4. By Sales Channel
9.11. North America Fluid Conveyance Products Motors Demand Share Forecast, 2019-2029
10. Latin America Fluid Conveyance Products Motors Market Analysis and Forecast
10.1. Introduction
10.1.1. Basis Point Share (BPS) Analysis by Country
10.1.2. Y-o-Y Growth Projections by Country
10.1.3. Latin America Average Pricing Analysis
10.2. Latin America Fluid Conveyance Products Motors Market Size and Volume Forecast by Country
10.2.1. Brazil
10.2.2. Mexico
10.2.3. Rest of Latin America
10.3. Absolute $ Opportunity Assessment by Country
10.4. Latin America Fluid Conveyance Products Motors Market Size and Volume Forecast by Application
10.4.1. Aerospace
10.4.2. Construction
10.4.3. Agriculture
10.4.4. Mining
10.4.5. Waste Water Treatment
10.4.6. Automobile
10.4.7. Others
10.5. Basis Point Share (BPS) Analysis by Application
10.6. Y-o-Y Growth Projections by Application
10.7. Latin America Fluid Conveyance Products Motors Market Size and Volume Forecast by Type
10.7.1. Tubes/Pipes
10.7.2. High Pressure Ducts
10.7.3. Low Pressure Ducts
10.8. Basis Point Share (BPS) Analysis by Type
10.9. Y-o-Y Growth Projections by Type
10.10. Market Attractiveness/Growth Potential Analysis
10.10.1. By Country
10.10.2. By Product Type
10.10.3. By Application
10.10.4. By Sales Channel
10.11. Latin America Fluid Conveyance Products Motors Demand Share Forecast, 2019-2029
11. Europe Fluid Conveyance Products Motors Market Analysis and Forecast
11.1. Introduction
11.1.1. Basis Point Share (BPS) Analysis by Country
11.1.2. Y-o-Y Growth Projections by Country
11.1.3. Europe Average Pricing Analysis
11.2. Europe Fluid Conveyance Products Motors Market Size and Volume Forecast by Country
11.2.1. Germany
11.2.2. France
11.2.3. Italy
11.2.4. U.K.
11.2.5. Spain
11.2.6. Russia
11.2.7. Rest of Europe
11.3. Absolute $ Opportunity Assessment by Country
11.4. Europe Fluid Conveyance Products Motors Market Size and Volume Forecast by Application
11.4.1. Aerospace
11.4.2. Construction
11.4.3. Agriculture
11.4.4. Mining
11.4.5. Waste Water Treatment
11.4.6. Automobile
11.4.7. Others
11.5. Basis Point Share (BPS) Analysis by Application
11.6. Y-o-Y Growth Projections by Application
11.7. Europe Fluid Conveyance Products Motors Market Size and Volume Forcast by Type
11.7.1. Tubes/Pipes
11.7.2. High Pressure Ducts
11.7.3. Low Pressure Ducts
11.8. Basis Point Share (BPS) Analysis by Type
11.9. Y-o-Y Growth Projections by Type
11.10. Market Attractiveness/Growth Potential Analysis
11.10.1. By Country
11.10.2. By Product Type
11.10.3. By Application
11.10.4. By Sales Channel
11.11. Europe Fluid Conveyance Products Motors Demand Share, 2019-2029
12. Asia Pacific Fluid Conveyance Products Motors Market Analysis and Forecast
12.1. Introduction
12.1.1. Basis Point Share (BPS) Analysis by Country
12.1.2. Y-o-Y Growth Projections by Country
12.1.3. Asia Pacific Average Pricing Analysis
12.2. Asia Pacific Fluid Conveyance Products Motors Market Size and Volume Forecast by Country
12.2.1. China
12.2.2. Japan
12.2.3. South Korea
12.2.4. India
12.2.5. Australia
12.2.6. Rest of Asia Pacific (APAC)
12.3. Absolute $ Opportunity Assessment by Country
12.4. Asia Pacific Fluid Conveyance Products Motors Market Size and Volume Forecast by Application
12.4.1. Aerospace
12.4.2. Construction
12.4.3. Agriculture
12.4.4. Mining
12.4.5. Waste Water Treatment
12.4.6. Automobile
12.4.7. Others
12.5. Basis Point Share (BPS) Analysis by Application
12.6. Y-o-Y Growth Projections by Application
12.7. Asia Pacific Fluid Conveyance Products Motors Market Size and Volume Forecast by Type
12.7.1. Tubes/Pipes
12.7.2. High Pressure Ducts
12.7.3. Low Pressure Ducts
12.8. Basis Point Share (BPS) Analysis by Type
12.9. Y-o-Y Growth Projections by Type
12.10. Market Attractiveness/Growth Potential Analysis
12.10.1. By Country
12.10.2. By Product Type
12.10.3. By Application
12.10.4. By Sales Channel
12.11. Asia Pacific Fluid Conveyance Products Motors Demand Share, 2019-2029
13. Middle East & Africa Fluid Conveyance Products Motors Market Analysis and Forecast
13.1. Introduction
13.1.1. Basis Point Share (BPS) Analysis by Country
13.1.2. Y-o-Y Growth Projections by Country
13.1.3. Asia Pacific Average Pricing Analysis
13.2. Middle East & Africa Fluid Conveyance Products Motors Market Size and Volume Forecast by Country
13.2.1. Saudi Arabia
13.2.2. South Africa
13.2.3. UAE
13.2.4. Rest of Middle East & Africa (MEA)
13.3. Absolute $ Opportunity Assessment by Country
13.4. Middle East & Africa Fluid Conveyance Products Motors Market Size and Volume Forecast by Application
13.4.1. Aerospace
13.4.2. Construction
13.4.3. Agriculture
13.4.4. Mining
13.4.5. Waste Water Treatment
13.4.6. Automobile
13.4.7. Others
13.5. Basis Point Share (BPS) Analysis by Application
13.6. Y-o-Y Growth Projections by Application
13.7. Middle East & Africa Fluid Conveyance Products Motors Market Size and Volume Forecast by Type
13.7.1. Tubes/Pipes
13.7.2. High Pressure Ducts
13.7.3. Low Pressure Ducts
13.8. Basis Point Share (BPS) Analysis by Type
13.9. Y-o-Y Growth Projections by Type
13.10. Market Attractiveness/Growth Potential Analysis
13.10.1. By Country
13.10.2. By Product Type
13.10.3. By Application
13.10.4. By Sales Channel
13.11. Middle East & Africa Fluid Conveyance Products Motors Demand Share, 2019-2029
14. Competition Landscape
14.1. Global Fluid Conveyance Products Motors Market: Market Share Analysis
14.2. Fluid Conveyance Products Motors Distributors and Customers
14.3. Fluid Conveyance Products Motors Market: Competitive Dashboard
14.4. Company Profiles (Details Overview, Financials, Developments, Strategy)
14.4.1. Eaton Corporation
14.4.1.1. Overview
14.4.1.2. Financials
14.4.1.3. Developments
14.4.1.4. Strategic Outlook
14.4.2. Parker Hannifin Corp
14.4.2.1. Overview
14.4.2.2. Financials
14.4.2.3. Developments
14.4.2.4. Strategic Outlook
14.4.3. Unison
14.4.3.1. Overview
14.4.3.2. Financials
14.4.3.3. Developments
14.4.3.4. Strategic Outlook
14.4.4. Ideal Plm
14.4.4.1. Overview
14.4.4.2. Financials
14.4.4.3. Developments
14.4.4.4. Strategic Outlook
14.4.5. Sabo Group
14.4.5.1. Overview
14.4.5.2. Financials
14.4.5.3. Developments
14.4.5.4. Strategic Outlook
14.4.6. Leading Edge Hydraulics
14.4.6.1. Overview
14.4.6.2. Financials
14.4.6.3. Developments
14.4.6.4. Strategic Outlook
14.4.7. Metline Industries
14.4.7.1. Overview
14.4.7.2. Financials
14.4.7.3. Developments
14.4.7.4. Strategic Outlook
14.4.8. GHX Industrial
14.4.8.1. Overview
14.4.8.2. Financials
14.4.8.3. Developments
14.4.8.4. Strategic Outlook
14.4.9. Pressure Lift Corporation
14.4.9.1. Overview
14.4.9.2. Financials
14.4.9.3. Developments
14.4.9.4. Strategic Outlook
14.4.10. Senior PlC.
14.4.10.1. Overview
14.4.10.2. Financials
14.4.10.3. Developments
14.4.10.4. Strategic Outlook
14.4.11. COMPANY 11
14.4.11.1. Overview
14.4.11.2. Financials
14.4.11.3. Developments
14.4.11.4. Strategic Outlook
14.4.12. COMPANY 12
14.4.12.1. Overview
14.4.12.2. Financials
14.4.12.3. Developments
14.4.12.4. Strategic Outlook
14.4.13. COMPANY 13
14.4.13.1. Overview
14.4.13.2. Financials
14.4.13.3. Developments
14.4.13.4. Strategic Outlook
14.4.14. COMPANY 14
14.4.14.1. Overview
14.4.14.2. Financials
14.4.14.3. Developments
14.4.14.4. Strategic Outlook
14.4.15. COMPANY 15
14.4.15.1. Overview
14.4.15.2. Financials
14.4.15.3. Developments
14.4.15.4. Strategic Outlook
14.4.16. COMPANY 16
14.4.16.1. Overview
14.4.16.2. Financials
14.4.16.3. Developments
14.4.16.4. Strategic Outlook
14.4.17. COMPANY 17
14.4.17.1. Overview
14.4.17.2. Financials
14.4.17.3. Developments
14.4.17.4. Strategic Outlook
14.4.18. COMPANY 18
14.4.18.1. Overview
14.4.18.2. Financials
14.4.18.3. Developments
14.4.18.4. Strategic Outlook
14.4.19. COMPANY 19
14.4.19.1. Overview
14.4.19.2. Financials
14.4.19.3. Developments
14.4.19.4. Strategic Outlook
14.4.20. COMPANY 20
14.4.20.1. Overview
14.4.20.2. Financials
14.4.20.3. Developments
14.4.20.4. Strategic Outlook