Market Overview:
The global 3C electronics coating market is expected to grow at a CAGR of 5.5% from 2018 to 2030. The growth in the market can be attributed to the increasing demand for 3C products, such as mobile phones, computers, and home appliances. In addition, the growing awareness about the benefits of using 3C electronics coatings is also contributing to the growth of this market. The UV curing coating segment is projected to grow at a higher CAGR than other segments during the forecast period. This can be attributed to its properties such as high durability and scratch resistance that are required for 3C products.
Product Definition:
3C Electronics Coating is a coating that is applied to electronic devices to protect them from corrosion and physical damage. The coating helps to keep the device's internals clean and free of debris, which can cause short circuits.
UV Curing Coating:
UV curing coating is a resin-based, one-time application coating that is cured by UV light. The process takes place in two stages; first the liquid coatings are applied to the substrate and then they are exposed to ultra-violet (UV) light for about 30 seconds which causes crosslinking between polymers thus hardening the coating.
Thermosetting Coating:
Thermosetting coatings are synthetic resins that are thermosetting or heat-resistant. They have high resistance to solvents and acids and can be cast or extruded in any shape. Thermoset coatings are tough as nails, but they do not flow like a liquid; instead, they set up like a rock once the temperature rises above room temperature.
Application Insights:
The global 3C electronics coating market is segmented based on application into mobile phone class, computer class, and home appliance class. The mobile phone application segment accounted for the largest share in 2017 owing to high demand from end-users. Increasing use of advanced materials such as titanium nitride and aluminum silicon alloy has boosted the demand for coatings in smartphones over the past few years.
The computer application segment is expected to witness significant growth over the forecast period due to increasing use of electronic devices at workplace and at home by consumers globally. Rising need for improved durability and heat resistance coatings that can withstand extreme temperatures without undergoing any change is anticipated to boost product demand over the next few years.
Regional Analysis:
Asia Pacific dominated the global 3C electronics coating market in terms of revenue with a share of over 45.0% in 2017. The region is expected to witness significant growth over the forecast period owing to increasing production and sales of mobile phones, computer systems, consumer electronics devices, and home appliances.
The presence of numerous manufacturers coupled with rapid industrialization has resulted in high product demand across Asia Pacific countries such as China and India. In addition, rising disposable income levels are anticipated to fuel industry expansion over the next eight years. Increasing investments by foreign companies for manufacturing their products within Asia Pacific region is also expected to boost regional market growth during the forecast period from 2018 to 2030 timeframe). For instance; Foxconn Technology Group has announced plans for building a factory that can manufacture one billion smartphones per year on an area equivalent to Belgium within China’s Henan Province which will start operating by 2019-2020 timeframe).
Growth Factors:
- Increasing demand from the automotive and aerospace industries for 3C electronics coatings that provide superior protection against corrosion, abrasion, and other environmental factors.
- Growing popularity of 3C electronics coatings among original equipment manufacturers (OEMs) as a way to improve product performance and differentiate their offerings in the competitive global marketplace.
- Advances in coating technology that allow for the development of new formulations with enhanced properties such as scratch resistance, chemical resistance, and thermal stability.
- Rising demand from consumers for portable electronic devices that are lightweight and durable with extended battery life cycles
Scope Of The Report
Report Attributes
Report Details
Report Title
3C Electronics Coating Market Research Report
By Type
UV Curing Coating, Thermosetting Coating
By Application
Mobile Phone Class, Computer Class, Home Appliance Class
By Companies
AkzoNobel, PPG, Beckers, Musashi Paint, Cashew, Sherwin-Williams, NATOCO, Origin, Sokan, Hipro, Rida
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
229
Number of Tables & Figures
161
Customization Available
Yes, the report can be customized as per your need.
Global 3C Electronics Coating Market Report Segments:
The global 3C Electronics Coating market is segmented on the basis of:
Types
UV Curing Coating, Thermosetting Coating
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Mobile Phone Class, Computer Class, Home Appliance Class
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- AkzoNobel
- PPG
- Beckers
- Musashi Paint
- Cashew
- Sherwin-Williams
- NATOCO
- Origin
- Sokan
- Hipro
- Rida
Highlights of The 3C Electronics Coating Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- UV Curing Coating
- Thermosetting Coating
- By Application:
- Mobile Phone Class
- Computer Class
- Home Appliance Class
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the 3C Electronics Coating Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
3C Electronics Coating is a protective coating that is applied to electronic components and other materials to prevent corrosion.
Some of the key players operating in the 3c electronics coating market are AkzoNobel, PPG, Beckers, Musashi Paint, Cashew, Sherwin-Williams, NATOCO, Origin, Sokan, Hipro, Rida.
The 3c electronics coating market is expected to grow at a compound annual growth rate of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 3C Electronics Coating Market Overview 4.1 Introduction 4.1.1 Market Taxonomy 4.1.2 Market Definition 4.1.3 Macro-Economic Factors Impacting the Market Growth 4.2 3C Electronics Coating Market Dynamics 4.2.1 Market Drivers 4.2.2 Market Restraints 4.2.3 Market Opportunity 4.3 3C Electronics Coating Market - Supply Chain Analysis 4.3.1 List of Key Suppliers 4.3.2 List of Key Distributors 4.3.3 List of Key Consumers 4.4 Key Forces Shaping the 3C Electronics Coating Market 4.4.1 Bargaining Power of Suppliers 4.4.2 Bargaining Power of Buyers 4.4.3 Threat of Substitution 4.4.4 Threat of New Entrants 4.4.5 Competitive Rivalry 4.5 Global 3C Electronics Coating Market Size & Forecast, 2018-2028 4.5.1 3C Electronics Coating Market Size and Y-o-Y Growth 4.5.2 3C Electronics Coating Market Absolute $ Opportunity
Chapter 5 Global 3C Electronics Coating Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 3C Electronics Coating Market Size Forecast by Type
5.2.1 UV Curing Coating
5.2.2 Thermosetting Coating
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global 3C Electronics Coating Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 3C Electronics Coating Market Size Forecast by Applications
6.2.1 Mobile Phone Class
6.2.2 Computer Class
6.2.3 Home Appliance Class
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global 3C Electronics Coating Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 3C Electronics Coating Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America 3C Electronics Coating Analysis and Forecast
9.1 Introduction
9.2 North America 3C Electronics Coating Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America 3C Electronics Coating Market Size Forecast by Type
9.6.1 UV Curing Coating
9.6.2 Thermosetting Coating
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America 3C Electronics Coating Market Size Forecast by Applications
9.10.1 Mobile Phone Class
9.10.2 Computer Class
9.10.3 Home Appliance Class
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe 3C Electronics Coating Analysis and Forecast
10.1 Introduction
10.2 Europe 3C Electronics Coating Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe 3C Electronics Coating Market Size Forecast by Type
10.6.1 UV Curing Coating
10.6.2 Thermosetting Coating
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe 3C Electronics Coating Market Size Forecast by Applications
10.10.1 Mobile Phone Class
10.10.2 Computer Class
10.10.3 Home Appliance Class
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific 3C Electronics Coating Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific 3C Electronics Coating Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific 3C Electronics Coating Market Size Forecast by Type
11.6.1 UV Curing Coating
11.6.2 Thermosetting Coating
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific 3C Electronics Coating Market Size Forecast by Applications
11.10.1 Mobile Phone Class
11.10.2 Computer Class
11.10.3 Home Appliance Class
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America 3C Electronics Coating Analysis and Forecast
12.1 Introduction
12.2 Latin America 3C Electronics Coating Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America 3C Electronics Coating Market Size Forecast by Type
12.6.1 UV Curing Coating
12.6.2 Thermosetting Coating
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America 3C Electronics Coating Market Size Forecast by Applications
12.10.1 Mobile Phone Class
12.10.2 Computer Class
12.10.3 Home Appliance Class
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) 3C Electronics Coating Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) 3C Electronics Coating Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) 3C Electronics Coating Market Size Forecast by Type
13.6.1 UV Curing Coating
13.6.2 Thermosetting Coating
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) 3C Electronics Coating Market Size Forecast by Applications
13.10.1 Mobile Phone Class
13.10.2 Computer Class
13.10.3 Home Appliance Class
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 3C Electronics Coating Market: Competitive Dashboard
14.2 Global 3C Electronics Coating Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 AkzoNobel
14.3.2 PPG
14.3.3 Beckers
14.3.4 Musashi Paint
14.3.5 Cashew
14.3.6 Sherwin-Williams
14.3.7 NATOCO
14.3.8 Origin
14.3.9 Sokan
14.3.10 Hipro
14.3.11 Rida