Market Overview:
The global 3D automated optical inspection equipment in PCB market is expected to grow at a CAGR of 7.5% during the forecast period from 2018 to 2030. The growth of this market can be attributed to the increasing demand for 3D AOI from various end-use industries, such as automotive electronics, consumer electronics, industrials, and others. In addition, the growing demand for miniaturized and high-density PCBs is also contributing to the growth of this market.
Product Definition:
3D Automated Optical Inspection Equipment is a technology used for inspecting the quality of Printed Circuit Boards. By using 3D Automated Optical Inspection Equipment, manufacturers can detect defects in PCBs that may be difficult to see with 2D inspection equipment.
Inline 3D AOI:
Inline 3D AOI is a technology that enables the production of high-quality images during inspection. It uses time-of-flight to capture multiple image frames in a very short period of time. The technique helps in capturing accurate and high quality images with reduced risk, which is highly beneficial for manufacturers as well as consumers.
Offline 3D AOI:
Offline 3D AOI is an image processing technology that creates a two-dimensional image of the printed circuit board (PCB) while it is being manufactured. The two-dimensional images can be inspected for defects and then later used to create a digital file with the required quality for printing onto the PCB.
Application Insights:
The application segment is segregated into automotive electronics, consumer electronics, industrial and other applications. In 2017, the automotive electronics segment dominated the global 3D AOI equipment market with a share of over 40.0%. The growth can be attributed to increasing demand for complex electronic products with high production volumes that require inspection at low cost and time.
Automotive electronic components are usually packed in small spaces and mounted on PCBs using numerous pins or sockets for their external connections. Hence, there is an increased need for automated optical inspection equipment that can detect errors quickly while minimizing human efforts during design verification stages of PCB manufacturing process.
Regional Analysis:
Asia Pacific dominated the global market in 2017 and is expected to continue its dominance over the forecast period. This growth can be attributed to increasing demand for consumer electronics, rapid industrialization, and rising investments in R&D. The region has witnessed a significant increase in production of electronic products such as smartphones and laptops which require high-quality printed circuit boards. Thus, growing demand for these products is anticipated to drive the regional market during the forecast period.
North America accounted for a significant share of revenue owing to early adoption of advanced technologies across various industries including automotive electronics among others.
Growth Factors:
- Increasing demand for miniaturization in electronic products
- Growing popularity of 3D printing technology
- Proliferation of advanced packaging technologies
- Rising demand for high-reliability electronics assemblies
- Emergence of next-generation semiconductor devices
Scope Of The Report
Report Attributes
Report Details
Report Title
3D Automated Optical Inspection Equipment in PCB Market Research Report
By Type
Inline 3D AOI, Offline 3D AOI
By Application
Automotive Electronics, Consumer Electronics, Industrials, Others
By Companies
Koh Young Technology, Mirtec, ViTrox Corporation Berhad, Saki Corporation, Cyberoptics Corporation, Omron Corporation, Viscom, Test Research, Parmi Corp, VI Technology (Mycronic), Koh Young Technology, Machine Vision Products (MVP), Mek Marantz Electronics, Pemtron Corp., Nordson YESTECH, JUTZE Intelligence Technology
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
230
Number of Tables & Figures
161
Customization Available
Yes, the report can be customized as per your need.
Global 3D Automated Optical Inspection Equipment in PCB Market Report Segments:
The global 3D Automated Optical Inspection Equipment in PCB market is segmented on the basis of:
Types
Inline 3D AOI, Offline 3D AOI
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Automotive Electronics, Consumer Electronics, Industrials, Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Koh Young Technology
- Mirtec
- ViTrox Corporation Berhad
- Saki Corporation
- Cyberoptics Corporation
- Omron Corporation
- Viscom
- Test Research
- Parmi Corp
- VI Technology (Mycronic)
- Koh Young Technology
- Machine Vision Products (MVP)
- Mek Marantz Electronics
- Pemtron Corp.
- Nordson YESTECH
- JUTZE Intelligence Technology
Highlights of The 3D Automated Optical Inspection Equipment in PCB Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Inline 3D AOI
- Offline 3D AOI
- By Application:
- Automotive Electronics
- Consumer Electronics
- Industrials
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the 3D Automated Optical Inspection Equipment in PCB Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
3D Automated Optical Inspection Equipment is a system that uses lasers and cameras to inspect printed circuit boards (PCBs) for defects.
Some of the major players in the 3d automated optical inspection equipment in pcb market are Koh Young Technology, Mirtec, ViTrox Corporation Berhad, Saki Corporation, Cyberoptics Corporation, Omron Corporation, Viscom, Test Research, Parmi Corp, VI Technology (Mycronic), Koh Young Technology, Machine Vision Products (MVP), Mek Marantz Electronics, Pemtron Corp., Nordson YESTECH, JUTZE Intelligence Technology.
The 3d automated optical inspection equipment in pcb market is expected to grow at a compound annual growth rate of 7.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 3D Automated Optical Inspection Equipment in PCB Market Overview 4.1 Introduction 4.1.1 Market Taxonomy 4.1.2 Market Definition 4.1.3 Macro-Economic Factors Impacting the Market Growth 4.2 3D Automated Optical Inspection Equipment in PCB Market Dynamics 4.2.1 Market Drivers 4.2.2 Market Restraints 4.2.3 Market Opportunity 4.3 3D Automated Optical Inspection Equipment in PCB Market - Supply Chain Analysis 4.3.1 List of Key Suppliers 4.3.2 List of Key Distributors 4.3.3 List of Key Consumers 4.4 Key Forces Shaping the 3D Automated Optical Inspection Equipment in PCB Market 4.4.1 Bargaining Power of Suppliers 4.4.2 Bargaining Power of Buyers 4.4.3 Threat of Substitution 4.4.4 Threat of New Entrants 4.4.5 Competitive Rivalry 4.5 Global 3D Automated Optical Inspection Equipment in PCB Market Size & Forecast, 2018-2028 4.5.1 3D Automated Optical Inspection Equipment in PCB Market Size and Y-o-Y Growth 4.5.2 3D Automated Optical Inspection Equipment in PCB Market Absolute $ Opportunity
Chapter 5 Global 3D Automated Optical Inspection Equipment in PCB Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 3D Automated Optical Inspection Equipment in PCB Market Size Forecast by Type
5.2.1 Inline 3D AOI
5.2.2 Offline 3D AOI
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global 3D Automated Optical Inspection Equipment in PCB Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 3D Automated Optical Inspection Equipment in PCB Market Size Forecast by Applications
6.2.1 Automotive Electronics
6.2.2 Consumer Electronics
6.2.3 Industrials
6.2.4 Others
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global 3D Automated Optical Inspection Equipment in PCB Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 3D Automated Optical Inspection Equipment in PCB Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America 3D Automated Optical Inspection Equipment in PCB Analysis and Forecast
9.1 Introduction
9.2 North America 3D Automated Optical Inspection Equipment in PCB Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America 3D Automated Optical Inspection Equipment in PCB Market Size Forecast by Type
9.6.1 Inline 3D AOI
9.6.2 Offline 3D AOI
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America 3D Automated Optical Inspection Equipment in PCB Market Size Forecast by Applications
9.10.1 Automotive Electronics
9.10.2 Consumer Electronics
9.10.3 Industrials
9.10.4 Others
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe 3D Automated Optical Inspection Equipment in PCB Analysis and Forecast
10.1 Introduction
10.2 Europe 3D Automated Optical Inspection Equipment in PCB Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe 3D Automated Optical Inspection Equipment in PCB Market Size Forecast by Type
10.6.1 Inline 3D AOI
10.6.2 Offline 3D AOI
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe 3D Automated Optical Inspection Equipment in PCB Market Size Forecast by Applications
10.10.1 Automotive Electronics
10.10.2 Consumer Electronics
10.10.3 Industrials
10.10.4 Others
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific 3D Automated Optical Inspection Equipment in PCB Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific 3D Automated Optical Inspection Equipment in PCB Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific 3D Automated Optical Inspection Equipment in PCB Market Size Forecast by Type
11.6.1 Inline 3D AOI
11.6.2 Offline 3D AOI
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific 3D Automated Optical Inspection Equipment in PCB Market Size Forecast by Applications
11.10.1 Automotive Electronics
11.10.2 Consumer Electronics
11.10.3 Industrials
11.10.4 Others
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America 3D Automated Optical Inspection Equipment in PCB Analysis and Forecast
12.1 Introduction
12.2 Latin America 3D Automated Optical Inspection Equipment in PCB Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America 3D Automated Optical Inspection Equipment in PCB Market Size Forecast by Type
12.6.1 Inline 3D AOI
12.6.2 Offline 3D AOI
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America 3D Automated Optical Inspection Equipment in PCB Market Size Forecast by Applications
12.10.1 Automotive Electronics
12.10.2 Consumer Electronics
12.10.3 Industrials
12.10.4 Others
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) 3D Automated Optical Inspection Equipment in PCB Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) 3D Automated Optical Inspection Equipment in PCB Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) 3D Automated Optical Inspection Equipment in PCB Market Size Forecast by Type
13.6.1 Inline 3D AOI
13.6.2 Offline 3D AOI
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) 3D Automated Optical Inspection Equipment in PCB Market Size Forecast by Applications
13.10.1 Automotive Electronics
13.10.2 Consumer Electronics
13.10.3 Industrials
13.10.4 Others
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 3D Automated Optical Inspection Equipment in PCB Market: Competitive Dashboard
14.2 Global 3D Automated Optical Inspection Equipment in PCB Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Koh Young Technology
14.3.2 Mirtec
14.3.3 ViTrox Corporation Berhad
14.3.4 Saki Corporation
14.3.5 Cyberoptics Corporation
14.3.6 Omron Corporation
14.3.7 Viscom
14.3.8 Test Research
14.3.9 Parmi Corp
14.3.10 VI Technology (Mycronic)
14.3.11 Koh Young Technology
14.3.12 Machine Vision Products (MVP)
14.3.13 Mek Marantz Electronics
14.3.14 Pemtron Corp.
14.3.15 Nordson YESTECH
14.3.16 JUTZE Intelligence Technology