Market Overview:
The global 3D printed electronics market is expected to grow at a CAGR of 16.5% during the forecast period from 2018 to 2030. The increasing demand for 3D printed electronics in various applications such as aerospace and defense, automotive, consumer electronics, healthcare, telecom and others is driving the growth of the global 3D printed electronics market. The growing demand for miniaturization and lightweighting in electronic devices is also fueling the growth of the global 3D printed electronics market. However, high initial setup cost may restrain the growth of this market during the forecast period. On basis of type, antennas are expected to hold a major share in terms of revenue contribution in 2018 owing to their wide range application across different industries such as aerospace and defense, automotive etc.
Product Definition:
3D Printed Electronics is the process of printing electronic circuits and devices on a 3D printer. This technology has the potential to revolutionize the way electronics are made, making them faster, cheaper, and more customizable.
Antennas:
Antennas are structures that transmit and receive radio frequency (RF) signals. They are used in various applications such as cell phones, Wi-Fi, Bluetooth, television broadcast etc. The global market for antennas is expected to witness significant growth over the forecast period owing to its increasing usage in 3D printed electronics devices such as wireless sensors and actuators among others.
Printed Circuit Boards (PCBs):
Printed circuit boards (PCBs) are a collection of electronic components mounted on a thin layer of copper or aluminum and connected by insulated wires. The printed circuit board market is expected to witness significant growth over the forecast period owing to increasing demand for consumer electronics such as mobile phones, computers, and tablets coupled with rising penetration in industrial applications.
Application Insights:
The aerospace and defense application segment accounted for the largest revenue share in 2017. The increasing need for replacing components that are 30 years old or more and the growing preference for 3D printed electronics over conventional printed circuit boards (PCBs) is expected to drive the demand from this sector. Furthermore, with rising concerns regarding environmental pollution due to excessive usage of plastics, composites are being used in aircraft parts instead of traditional metal alloys. This trend is expected to continue over the forecast period as plastic can be manufactured using renewable sources such as corn starch and cellulose which reduces carbon emissions significantly.
Printed circuit boards (PCB) form an essential part of electronic devices across various end-use industries including automotive, consumer electronics, healthcare etc., owing to their flexibility & versatility coupled with low production costs & time advantages offered by prototyping PCBs make them highly preferred among manufacturers worldwide.
Regional Analysis:
North America accounted for the largest revenue share in 2017. The region is expected to maintain its lead over the forecast period owing to increasing research and development activities, technological advancements, and high adoption of 3D printed electronics in several applications including aerospace & defense, automotive & transportation, healthcare & medical devices.
Asia Pacific is anticipated to witness lucrative growth over the coming years owing to rising demand from end-use industries such as consumer electronics (LEDs), automotive (electric vehicles), industrial machinery (3D printers) and others. Increasing government initiatives towards manufacturing of additive manufactured parts are also expected to drive regional market growth during the forecast period.
Growth Factors:
- Increased demand for miniaturization in electronic devices: The need for smaller, lighter and more powerful electronic devices is driving the demand for 3D printed electronics.
- Development of new printing technologies: Continuous development of new printing technologies is helping to reduce the manufacturing time and cost of 3D printed electronics.
- Growing popularity of wearable technology: The growing popularity of wearable technology is providing a major boost to the 3D printed electronics market.
- Rising demand from automotive industry: The increasing use of advanced sensors and control systems in automobiles is fueling the growth of 3D printed electronics market.
Scope Of The Report
Report Attributes
Report Details
Report Title
3D Printed Electronics Market Research Report
By Type
Antennas, Printed Circuit Boards (PCBs), Sensors, Others
By Application
Aerospace and Defense, Automotive, Consumer Electronics, Healthcare, Telecom, Others
By Companies
Nano Dimension Ltd., Molex LLC, Xerox Corporation, Novacentrix, Optomec Inc., NeoTech AMT GmbH, Voxel8, Inc, Beta Layout GmbH, Draper, EoPlex Inc.
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
216
Number of Tables & Figures
152
Customization Available
Yes, the report can be customized as per your need.
Global 3D Printed Electronics Market Report Segments:
The global 3D Printed Electronics market is segmented on the basis of:
Types
Antennas, Printed Circuit Boards (PCBs), Sensors, Others
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Aerospace and Defense, Automotive, Consumer Electronics, Healthcare, Telecom, Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Nano Dimension Ltd.
- Molex LLC
- Xerox Corporation
- Novacentrix
- Optomec Inc.
- NeoTech AMT GmbH
- Voxel8, Inc
- Beta Layout GmbH
- Draper
- EoPlex Inc.
Highlights of The 3D Printed Electronics Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Antennas
- Printed Circuit Boards (PCBs)
- Sensors
- Others
- By Application:
- Aerospace and Defense
- Automotive
- Consumer Electronics
- Healthcare
- Telecom
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the 3D Printed Electronics Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
3D Printed Electronics is a technology that uses 3D printing to create electronic components and devices. This process allows for the creation of complex, customized parts that are difficult or impossible to make using traditional manufacturing methods.
Some of the major companies in the 3d printed electronics market are Nano Dimension Ltd., Molex LLC, Xerox Corporation, Novacentrix, Optomec Inc., NeoTech AMT GmbH, Voxel8, Inc, Beta Layout GmbH, Draper, EoPlex Inc..
The 3d printed electronics market is expected to grow at a compound annual growth rate of 16.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 3D Printed Electronics Market Overview
4.1 Introduction
4.1.1 Market Taxonomy
4.1.2 Market Definition
4.1.3 Macro-Economic Factors Impacting the Market Growth
4.2 3D Printed Electronics Market Dynamics
4.2.1 Market Drivers
4.2.2 Market Restraints
4.2.3 Market Opportunity
4.3 3D Printed Electronics Market - Supply Chain Analysis
4.3.1 List of Key Suppliers
4.3.2 List of Key Distributors
4.3.3 List of Key Consumers
4.4 Key Forces Shaping the 3D Printed Electronics Market
4.4.1 Bargaining Power of Suppliers
4.4.2 Bargaining Power of Buyers
4.4.3 Threat of Substitution
4.4.4 Threat of New Entrants
4.4.5 Competitive Rivalry
4.5 Global 3D Printed Electronics Market Size & Forecast, 2018-2028
4.5.1 3D Printed Electronics Market Size and Y-o-Y Growth
4.5.2 3D Printed Electronics Market Absolute $ Opportunity
Chapter 5 Global 3D Printed Electronics Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 3D Printed Electronics Market Size Forecast by Type
5.2.1 Antennas
5.2.2 Printed Circuit Boards (PCBs)
5.2.3 Sensors
5.2.4 Others
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global 3D Printed Electronics Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 3D Printed Electronics Market Size Forecast by Applications
6.2.1 Aerospace and Defense
6.2.2 Automotive
6.2.3 Consumer Electronics
6.2.4 Healthcare
6.2.5 Telecom
6.2.6 Others
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global 3D Printed Electronics Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 3D Printed Electronics Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America 3D Printed Electronics Analysis and Forecast
9.1 Introduction
9.2 North America 3D Printed Electronics Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America 3D Printed Electronics Market Size Forecast by Type
9.6.1 Antennas
9.6.2 Printed Circuit Boards (PCBs)
9.6.3 Sensors
9.6.4 Others
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America 3D Printed Electronics Market Size Forecast by Applications
9.10.1 Aerospace and Defense
9.10.2 Automotive
9.10.3 Consumer Electronics
9.10.4 Healthcare
9.10.5 Telecom
9.10.6 Others
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe 3D Printed Electronics Analysis and Forecast
10.1 Introduction
10.2 Europe 3D Printed Electronics Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe 3D Printed Electronics Market Size Forecast by Type
10.6.1 Antennas
10.6.2 Printed Circuit Boards (PCBs)
10.6.3 Sensors
10.6.4 Others
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe 3D Printed Electronics Market Size Forecast by Applications
10.10.1 Aerospace and Defense
10.10.2 Automotive
10.10.3 Consumer Electronics
10.10.4 Healthcare
10.10.5 Telecom
10.10.6 Others
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific 3D Printed Electronics Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific 3D Printed Electronics Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific 3D Printed Electronics Market Size Forecast by Type
11.6.1 Antennas
11.6.2 Printed Circuit Boards (PCBs)
11.6.3 Sensors
11.6.4 Others
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific 3D Printed Electronics Market Size Forecast by Applications
11.10.1 Aerospace and Defense
11.10.2 Automotive
11.10.3 Consumer Electronics
11.10.4 Healthcare
11.10.5 Telecom
11.10.6 Others
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America 3D Printed Electronics Analysis and Forecast
12.1 Introduction
12.2 Latin America 3D Printed Electronics Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America 3D Printed Electronics Market Size Forecast by Type
12.6.1 Antennas
12.6.2 Printed Circuit Boards (PCBs)
12.6.3 Sensors
12.6.4 Others
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America 3D Printed Electronics Market Size Forecast by Applications
12.10.1 Aerospace and Defense
12.10.2 Automotive
12.10.3 Consumer Electronics
12.10.4 Healthcare
12.10.5 Telecom
12.10.6 Others
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) 3D Printed Electronics Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) 3D Printed Electronics Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) 3D Printed Electronics Market Size Forecast by Type
13.6.1 Antennas
13.6.2 Printed Circuit Boards (PCBs)
13.6.3 Sensors
13.6.4 Others
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) 3D Printed Electronics Market Size Forecast by Applications
13.10.1 Aerospace and Defense
13.10.2 Automotive
13.10.3 Consumer Electronics
13.10.4 Healthcare
13.10.5 Telecom
13.10.6 Others
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 3D Printed Electronics Market: Competitive Dashboard
14.2 Global 3D Printed Electronics Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Nano Dimension Ltd.
14.3.2 Molex LLC
14.3.3 Xerox Corporation
14.3.4 Novacentrix
14.3.5 Optomec Inc.
14.3.6 NeoTech AMT GmbH
14.3.7 Voxel8, Inc
14.3.8 Beta Layout GmbH
14.3.9 Draper
14.3.10 EoPlex Inc.
