Market Overview:
The global acoustic PTFE vent membrane market is expected to grow at a CAGR of 5.5% during the forecast period from 2018 to 2030. The growth in this market can be attributed to the increasing demand for portable electronics and fixed equipment. Additionally, the growing awareness about noise pollution and its effects on human health is also driving the demand for acoustic PTFE vent membranes globally.
Product Definition:
An acoustic PTFE vent membrane is a device that is used to control the noise levels in an environment. It helps to block sound from passing through walls and other surfaces while allowing air to flow freely. This device is often used in industrial or commercial settings where noise pollution needs to be controlled.
Adhesive Vents:
Adhesive vents are small circular or elongated holes that are present on the outer surface of acoustic PTFE vent membranes. They serve as a means for air to escape from the membrane during soundproofing and acoustical insulation activities. The adhesive vent is an important component in noise control and acoustical barrier systems, which help reduce sound transfer from one space to another by creating a vacuum between two surfaces.
Vent Without Backing Material:
The vent without backing material is a new emerging trend in the acoustic PTFE vent membrane market. It has been observed that many manufacturers are now focusing on developing products using this technology, which is expected to drive the growth of the market over the forecast period. The primary factor driving product demand is its ability to reduce noise levels and improve thermal performance in buildings.
Application Insights:
Portable electronics application segment accounted for the largest share of over 30.0% in 2017. Rising demand for lightweight and portable products, such as smartphones, laptops and tablets is expected to be a key factor driving the growth of this segment during the forecast period. In addition, acoustic PTFE vent membranes are used in electronic devices including computers, printers and copiers due to its excellent properties such as high thermal resistance & low conductivity which further enhances product life cycle.
Fixed equipment application segment is expected to witness significant growth over the forecast period owing to rising use of acoustics in various applications including HVAC (heating ventilation air conditioning), noise control & filtration systems among others which require a constant supply of air flow with low pressure drop across them at an affordable cost coupled with high durability ensuring long-term performance without maintenance costs incurred by way of replacement or refurbishing old systems overheads are some major factors contributing towards market growth during future years.
Regional Analysis:
Asia Pacific dominated the global market in 2017. The region is expected to continue its dominance over the forecast period owing to rising product demand from various end-use industries, such as medical, portable electronics and industrial. In addition, increasing investments in construction activities are also anticipated to drive the regional market growth over the forecast period.
The Asia Pacific acoustic PTFE vent membrane industry is expected to be driven by rising product demand from countries such as China and India on account of rapid industrialization coupled with expansion of manufacturing facilities for electronic products and medical equipment in these countries. In addition, favorable government policies promoting domestic manufacturing are likely to boost industry growth over the coming years.
North America accounted for a significant share of revenue generated by selling products into international markets including Brazil.
Growth Factors:
- Increasing demand from end-use industries such as automotive, aerospace, and medical
- Growing popularity of acoustic vent membranes in lightweight vehicles
- Rising investments in research and development for advanced acoustic technologies
- Proliferation of online platforms for selling acoustic vent membranes
- Growing number of manufacturing facilities for producing acoustic vent membranes
Scope Of The Report
Report Attributes
Report Details
Report Title
Acoustic PTFE Vent Membrane Market Research Report
By Type
Adhesive Vents, Vent Without Backing Material
By Application
Portable Electronics, Fixed Equipment
By Companies
Greenwood, Gore, Donaldson, R.W. Simon, Sumitomo Electric, Taconic, Layne, Porex, Zeus, Chukoh, Greenwood, Tongda
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
186
Number of Tables & Figures
131
Customization Available
Yes, the report can be customized as per your need.
Global Acoustic PTFE Vent Membrane Market Report Segments:
The global Acoustic PTFE Vent Membrane market is segmented on the basis of:
Types
Adhesive Vents, Vent Without Backing Material
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Portable Electronics, Fixed Equipment
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Greenwood
- Gore
- Donaldson
- R.W. Simon
- Sumitomo Electric
- Taconic
- Layne
- Porex
- Zeus
- Chukoh
- Greenwood
- Tongda
Highlights of The Acoustic PTFE Vent Membrane Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Adhesive Vents
- Vent Without Backing Material
- By Application:
- Portable Electronics
- Fixed Equipment
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Acoustic PTFE Vent Membrane Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Acoustic PTFE Vent Membrane is a type of vent membrane that is made from acoustic PTFE. This material is very thin and has a high surface area, which makes it ideal for use in ventilation systems. Acoustic PTFE Vent Membrane can be used to filter out airborne particles and other contaminants, while also providing an effective barrier against moisture and heat.
Some of the key players operating in the acoustic ptfe vent membrane market are Greenwood, Gore, Donaldson, R.W. Simon, Sumitomo Electric, Taconic, Layne, Porex, Zeus, Chukoh, Greenwood, Tongda.
The acoustic ptfe vent membrane market is expected to register a CAGR of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Acoustic PTFE Vent Membrane Market Overview 4.1 Introduction 4.1.1 Market Taxonomy 4.1.2 Market Definition 4.1.3 Macro-Economic Factors Impacting the Market Growth 4.2 Acoustic PTFE Vent Membrane Market Dynamics 4.2.1 Market Drivers 4.2.2 Market Restraints 4.2.3 Market Opportunity 4.3 Acoustic PTFE Vent Membrane Market - Supply Chain Analysis 4.3.1 List of Key Suppliers 4.3.2 List of Key Distributors 4.3.3 List of Key Consumers 4.4 Key Forces Shaping the Acoustic PTFE Vent Membrane Market 4.4.1 Bargaining Power of Suppliers 4.4.2 Bargaining Power of Buyers 4.4.3 Threat of Substitution 4.4.4 Threat of New Entrants 4.4.5 Competitive Rivalry 4.5 Global Acoustic PTFE Vent Membrane Market Size & Forecast, 2018-2028 4.5.1 Acoustic PTFE Vent Membrane Market Size and Y-o-Y Growth 4.5.2 Acoustic PTFE Vent Membrane Market Absolute $ Opportunity
Chapter 5 Global Acoustic PTFE Vent Membrane Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Acoustic PTFE Vent Membrane Market Size Forecast by Type
5.2.1 Adhesive Vents
5.2.2 Vent Without Backing Material
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Acoustic PTFE Vent Membrane Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Acoustic PTFE Vent Membrane Market Size Forecast by Applications
6.2.1 Portable Electronics
6.2.2 Fixed Equipment
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Acoustic PTFE Vent Membrane Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Acoustic PTFE Vent Membrane Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Acoustic PTFE Vent Membrane Analysis and Forecast
9.1 Introduction
9.2 North America Acoustic PTFE Vent Membrane Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Acoustic PTFE Vent Membrane Market Size Forecast by Type
9.6.1 Adhesive Vents
9.6.2 Vent Without Backing Material
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Acoustic PTFE Vent Membrane Market Size Forecast by Applications
9.10.1 Portable Electronics
9.10.2 Fixed Equipment
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Acoustic PTFE Vent Membrane Analysis and Forecast
10.1 Introduction
10.2 Europe Acoustic PTFE Vent Membrane Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Acoustic PTFE Vent Membrane Market Size Forecast by Type
10.6.1 Adhesive Vents
10.6.2 Vent Without Backing Material
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Acoustic PTFE Vent Membrane Market Size Forecast by Applications
10.10.1 Portable Electronics
10.10.2 Fixed Equipment
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Acoustic PTFE Vent Membrane Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Acoustic PTFE Vent Membrane Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Acoustic PTFE Vent Membrane Market Size Forecast by Type
11.6.1 Adhesive Vents
11.6.2 Vent Without Backing Material
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Acoustic PTFE Vent Membrane Market Size Forecast by Applications
11.10.1 Portable Electronics
11.10.2 Fixed Equipment
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Acoustic PTFE Vent Membrane Analysis and Forecast
12.1 Introduction
12.2 Latin America Acoustic PTFE Vent Membrane Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Acoustic PTFE Vent Membrane Market Size Forecast by Type
12.6.1 Adhesive Vents
12.6.2 Vent Without Backing Material
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Acoustic PTFE Vent Membrane Market Size Forecast by Applications
12.10.1 Portable Electronics
12.10.2 Fixed Equipment
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Acoustic PTFE Vent Membrane Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Acoustic PTFE Vent Membrane Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Acoustic PTFE Vent Membrane Market Size Forecast by Type
13.6.1 Adhesive Vents
13.6.2 Vent Without Backing Material
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Acoustic PTFE Vent Membrane Market Size Forecast by Applications
13.10.1 Portable Electronics
13.10.2 Fixed Equipment
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Acoustic PTFE Vent Membrane Market: Competitive Dashboard
14.2 Global Acoustic PTFE Vent Membrane Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Greenwood
14.3.2 Gore
14.3.3 Donaldson
14.3.4 R.W. Simon
14.3.5 Sumitomo Electric
14.3.6 Taconic
14.3.7 Layne
14.3.8 Porex
14.3.9 Zeus
14.3.10 Chukoh
14.3.11 Greenwood
14.3.12 Tongda