Market Overview:
The global acrylic manifolds market is expected to grow at a CAGR of 5.8% during the forecast period from 2018 to 2030. The growth in the market can be attributed to the increasing demand for acrylic manifolds in medical, life sciences & analytical, passenger car, commercial trucks, industrial vehicle and aerospace applications. North America is expected to lead the global acrylic manifolds market during the forecast period followed by Europe and Asia Pacific.
Product Definition:
An acrylic manifold is a device that is used to control the flow of fluid through a system. It is an important component in many industrial and commercial applications.
Solvent Bonded Acrylic Manifolds:
Solvent bonded acrylic manifolds are used in applications where high-performance and low-cost are both required. The growth factor for this market is the growing demand from end-use industries such as automotive, construction, marine, electronics and electrical appliances. Solvent bonded acrylics have a lower cost than other types of acrylic products; however they have similar or higher performance than thermoset or heat cured type which costs more.
Diffusion Bonded Acrylic Manifolds:
Diffusion bonded acrylic manifolds are manufactured by the process of diffusion bonding. This process is used to join two or more substances that do not chemically react with each other. The product has applications in various end-use industries such as construction, automotive and packaging among others.
Application Insights:
Passenger car was the largest application segment in 2017 and is expected to continue its dominance over the forecast period. Rising purchasing power, growing middle-class population, and increasing disposable income are likely to propel demand for passenger cars across various regions. In addition, technological advancements coupled with high production standards of passenger cars are anticipated to fuel market growth over the coming years.
The life sciences & analytical segment is projected register a significant CAGR during the forecast period owing to rising R&D activities in pharmaceutical industry globally. Increasing government funding for medical research along with favorable regulations encouraging innovation in this sector is further anticipated to boost product demand worldwide.
Acrylic manifolds play an important role in manufacturing process of various industrial vehicles including trucks, tankers & buses among others which makes them one of the most promising segments on global scale as well as regional level throughout North America and Europe respectively remain dominant markets globally due largelyto their large production bases coupled with strong economies that encourage foreign investments particularly from Japan.
Regional Analysis:
Asia Pacific dominated the global market in 2017. The region is expected to witness significant growth over the forecast period owing to increasing demand from end-use industries, such as medical, automotive and aerospace. In addition, rising disposable income levels coupled with expanding population in this region is anticipated to fuel product demand.
The growing manufacturing sector in emerging economies of Asia Pacific including China and India are also likely to contribute significantly toward product demand over the next eight years.
Europe accounted for a major share of revenue due to well-established automotive.
Growth Factors:
- Increasing demand for acrylic manifolds in the automotive and medical industries
- Growing popularity of acrylic manifolds among DIY enthusiasts and hobbyists
- Rising demand for lightweight and durable manifolds from end-users
- Technological advancements in the manufacturing of acrylic manifolds
- Growing awareness about the benefits of using acrylic manifolds among consumers
Scope Of The Report
Report Attributes
Report Details
Report Title
Acrylic Manifolds Market Research Report
By Type
Solvent Bonded Acrylic Manifolds, Diffusion Bonded Acrylic Manifolds, Laser Welded Acrylic Manifolds
By Application
Medical, Life Sciences & Analytical, Passenger Car, Commercial Trucks, Industrial Vehicle, Aerospace, Others
By Companies
Carville, Clippard, Fuji Denolo, IDEX Health & Science, Diba Industries, Industrial Plastic Fabrications, Controlled Fluidics, Piedmont CMG, ZEG-MED
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
120
Number of Tables & Figures
84
Customization Available
Yes, the report can be customized as per your need.
Global Acrylic Manifolds Market Report Segments:
The global Acrylic Manifolds market is segmented on the basis of:
Types
Solvent Bonded Acrylic Manifolds, Diffusion Bonded Acrylic Manifolds, Laser Welded Acrylic Manifolds
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Medical, Life Sciences & Analytical, Passenger Car, Commercial Trucks, Industrial Vehicle, Aerospace, Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Carville
- Clippard
- Fuji Denolo
- IDEX Health & Science
- Diba Industries
- Industrial Plastic Fabrications
- Controlled Fluidics
- Piedmont CMG
- ZEG-MED
Highlights of The Acrylic Manifolds Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Solvent Bonded Acrylic Manifolds
- Diffusion Bonded Acrylic Manifolds
- Laser Welded Acrylic Manifolds
- By Application:
- Medical
- Life Sciences & Analytical
- Passenger Car
- Commercial Trucks
- Industrial Vehicle
- Aerospace
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Acrylic Manifolds Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Acrylic manifolds are a type of plastic tubing that is used to transfer fluids and gases. They are often used in industrial applications, such as oil refineries and chemical plants. Acrylic manifolds are also commonly used in the automotive industry to transfer fuel from one tank to another.
Some of the major players in the acrylic manifolds market are Carville, Clippard, Fuji Denolo, IDEX Health & Science, Diba Industries, Industrial Plastic Fabrications, Controlled Fluidics, Piedmont CMG, ZEG-MED.
The acrylic manifolds market is expected to grow at a compound annual growth rate of 5.8%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Acrylic Manifolds Market Overview
4.1 Introduction
4.1.1 Market Taxonomy
4.1.2 Market Definition
4.1.3 Macro-Economic Factors Impacting the Market Growth
4.2 Acrylic Manifolds Market Dynamics
4.2.1 Market Drivers
4.2.2 Market Restraints
4.2.3 Market Opportunity
4.3 Acrylic Manifolds Market - Supply Chain Analysis
4.3.1 List of Key Suppliers
4.3.2 List of Key Distributors
4.3.3 List of Key Consumers
4.4 Key Forces Shaping the Acrylic Manifolds Market
4.4.1 Bargaining Power of Suppliers
4.4.2 Bargaining Power of Buyers
4.4.3 Threat of Substitution
4.4.4 Threat of New Entrants
4.4.5 Competitive Rivalry
4.5 Global Acrylic Manifolds Market Size & Forecast, 2020-2028
4.5.1 Acrylic Manifolds Market Size and Y-o-Y Growth
4.5.2 Acrylic Manifolds Market Absolute $ Opportunity
Chapter 5 Global Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Market Size Forecast by Type
5.2.1 Solvent Bonded Acrylic Manifolds
5.2.2 Diffusion Bonded Acrylic Manifolds
5.2.3 Laser Welded Acrylic Manifolds
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Market Size Forecast by Applications
6.2.1 Medical
6.2.2 Life Sciences & Analytical
6.2.3 Passenger Car
6.2.4 Commercial Trucks
6.2.5 Industrial Vehicle
6.2.6 Aerospace
6.2.7 Others
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Acrylic Manifolds Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Acrylic Manifolds Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Analysis and Forecast
9.1 Introduction
9.2 North America Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Market Size Forecast by Type
9.6.1 Solvent Bonded Acrylic Manifolds
9.6.2 Diffusion Bonded Acrylic Manifolds
9.6.3 Laser Welded Acrylic Manifolds
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Market Size Forecast by Applications
9.10.1 Medical
9.10.2 Life Sciences & Analytical
9.10.3 Passenger Car
9.10.4 Commercial Trucks
9.10.5 Industrial Vehicle
9.10.6 Aerospace
9.10.7 Others
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Analysis and Forecast
10.1 Introduction
10.2 Europe Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Market Size Forecast by Type
10.6.1 Solvent Bonded Acrylic Manifolds
10.6.2 Diffusion Bonded Acrylic Manifolds
10.6.3 Laser Welded Acrylic Manifolds
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Market Size Forecast by Applications
10.10.1 Medical
10.10.2 Life Sciences & Analytical
10.10.3 Passenger Car
10.10.4 Commercial Trucks
10.10.5 Industrial Vehicle
10.10.6 Aerospace
10.10.7 Others
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Market Size Forecast by Type
11.6.1 Solvent Bonded Acrylic Manifolds
11.6.2 Diffusion Bonded Acrylic Manifolds
11.6.3 Laser Welded Acrylic Manifolds
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Market Size Forecast by Applications
11.10.1 Medical
11.10.2 Life Sciences & Analytical
11.10.3 Passenger Car
11.10.4 Commercial Trucks
11.10.5 Industrial Vehicle
11.10.6 Aerospace
11.10.7 Others
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Analysis and Forecast
12.1 Introduction
12.2 Latin America Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Market Size Forecast by Type
12.6.1 Solvent Bonded Acrylic Manifolds
12.6.2 Diffusion Bonded Acrylic Manifolds
12.6.3 Laser Welded Acrylic Manifolds
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Market Size Forecast by Applications
12.10.1 Medical
12.10.2 Life Sciences & Analytical
12.10.3 Passenger Car
12.10.4 Commercial Trucks
12.10.5 Industrial Vehicle
12.10.6 Aerospace
12.10.7 Others
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Market Size Forecast by Type
13.6.1 Solvent Bonded Acrylic Manifolds
13.6.2 Diffusion Bonded Acrylic Manifolds
13.6.3 Laser Welded Acrylic Manifolds
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Market Size Forecast by Applications
13.10.1 Medical
13.10.2 Life Sciences & Analytical
13.10.3 Passenger Car
13.10.4 Commercial Trucks
13.10.5 Industrial Vehicle
13.10.6 Aerospace
13.10.7 Others
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Acrylic Manifolds Market: Competitive Dashboard
14.2 Global Acrylic Manifolds Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Carville
14.3.2 Clippard
14.3.3 Fuji Denolo
14.3.4 IDEX Health & Science
14.3.5 Diba Industries
14.3.6 Industrial Plastic Fabrications
14.3.7 Controlled Fluidics
14.3.8 Piedmont CMG
14.3.9 ZEG-MED
