Market Overview:
The global adhesive application equipment market is expected to grow at a CAGR of 5.5% during the forecast period from 2018 to 2030. The growth in this market can be attributed to the increasing demand for adhesives in various end-use industries, such as automotive, construction, packaging, electronics, and others. In addition, the growing demand for lightweight and fuel-efficient vehicles is also propelling the growth of the global adhesive application equipment market.
Product Definition:
Adhesive application equipment is used to apply adhesives, coatings and sealants. The importance of adhesive application equipment is that it ensures a consistent and even distribution of the adhesive, coating or sealant. This results in a better bond between the substrate and the adhesive.
Handgun:
Handgun, also known as handgun or pistol, is a single-shot weapon with a calibre of less than 0.45 inches. They are generally used by military and law enforcement officers as they allow them to fire bullets more rapidly and accurately at a greater distance than other firearms which are suitable for close combat situations.
Automated Pneumatic Gun:
The automated pneumatic gun is a device used to apply adhesive products such as tapes, labels and graphics on various substrates. It uses compressed air or nitrogen as a propellant to propel the product at high speed onto the target surface. The components of an APG include a pressure-demand regulator, pressure-regulating valve, product tank and supply line assembly (if required), mounting bracket and power source (if any).
Application Insights:
The automotive application segment accounted for the largest share of over 30.0% in 2017. Global adhesive application equipment market is expected to witness significant growth on account of rising demand for adhesives in various automotive applications such as bonding, laminating and rivetting. In addition, increasing use of electric guns for installing decorative trim and logos on vehicles is expected to drive the industry growth over the forecast period.
Construction was estimated as one of the major applications owing to rapid industrialization and urbanization resulting in increased construction activities globally.
Regional Analysis:
Asia Pacific is expected to be the fastest-growing regional market at a CAGR of XX% from 2018 to 2030 owing to rapid industrialization and increasing foreign investments in the region. The growth can be attributed to various factors such as improving economic conditions, rising disposable income levels, and expanding end-use industries.
The Asia Pacific adhesives industry is dominated by China and India on account of low manufacturing costs coupled with easy availability of labor & raw materials in these countries. Moreover, growing population has led to an increase in demand for consumer goods along with automobiles; which will further propel product demand over the forecast period.
Growth Factors:
- Increasing demand for adhesive application equipment in the automotive and construction industries
- Growing demand for advanced adhesive application equipment with features such as precision control and automation
- Rising popularity of adhesives as an alternative to welding and riveting in manufacturing processes
- Proliferation of new applications for adhesives, such as medical devices, solar energy systems, and electronic components
- Technological advancements that improve the performance of adhesive application equipment
Scope Of The Report
Report Attributes
Report Details
Report Title
Adhesive Application Equipment Market Research Report
By Type
Handgun, Automated Pneumatic Gun, Automated Electric Gun, Jetting
By Application
Automotive, Construction, Packaging, Electronics, Additives, Apparel, Labeling and Mailing, Aerospace, Other
By Companies
3M, ITW Dynatec, Jesco Products Company, Preo, The Union Tool Corporation, Fishman Corporation, Nordson Sealant Equipment, Kent Machine, Ttarp Fabricating and Converting Equipment, Fluid Research, 3M
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
203
Number of Tables & Figures
143
Customization Available
Yes, the report can be customized as per your need.
Global Adhesive Application Equipment Market Report Segments:
The global Adhesive Application Equipment market is segmented on the basis of:
Types
Handgun, Automated Pneumatic Gun, Automated Electric Gun, Jetting
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Automotive, Construction, Packaging, Electronics, Additives, Apparel, Labeling and Mailing, Aerospace, Other
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- 3M
- ITW Dynatec
- Jesco Products Company
- Preo
- The Union Tool Corporation
- Fishman Corporation
- Nordson Sealant Equipment
- Kent Machine
- Ttarp Fabricating and Converting Equipment
- Fluid Research
- 3M
Highlights of The Adhesive Application Equipment Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Handgun
- Automated Pneumatic Gun
- Automated Electric Gun
- Jetting
- By Application:
- Automotive
- Construction
- Packaging
- Electronics
- Additives
- Apparel
- Labeling and Mailing
- Aerospace
- Other
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Adhesive Application Equipment Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Adhesive application equipment is a machine that applies adhesive to various surfaces.
Some of the major companies in the adhesive application equipment market are 3M, ITW Dynatec, Jesco Products Company, Preo, The Union Tool Corporation, Fishman Corporation, Nordson Sealant Equipment, Kent Machine, Ttarp Fabricating and Converting Equipment, Fluid Research, 3M.
The adhesive application equipment market is expected to register a CAGR of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Adhesive Application Equipment Market Overview 4.1 Introduction 4.1.1 Market Taxonomy 4.1.2 Market Definition 4.1.3 Macro-Economic Factors Impacting the Market Growth 4.2 Adhesive Application Equipment Market Dynamics 4.2.1 Market Drivers 4.2.2 Market Restraints 4.2.3 Market Opportunity 4.3 Adhesive Application Equipment Market - Supply Chain Analysis 4.3.1 List of Key Suppliers 4.3.2 List of Key Distributors 4.3.3 List of Key Consumers 4.4 Key Forces Shaping the Adhesive Application Equipment Market 4.4.1 Bargaining Power of Suppliers 4.4.2 Bargaining Power of Buyers 4.4.3 Threat of Substitution 4.4.4 Threat of New Entrants 4.4.5 Competitive Rivalry 4.5 Global Adhesive Application Equipment Market Size & Forecast, 2018-2028 4.5.1 Adhesive Application Equipment Market Size and Y-o-Y Growth 4.5.2 Adhesive Application Equipment Market Absolute $ Opportunity
Chapter 5 Global Adhesive Application Equipment Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Adhesive Application Equipment Market Size Forecast by Type
5.2.1 Handgun
5.2.2 Automated Pneumatic Gun
5.2.3 Automated Electric Gun
5.2.4 Jetting
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Adhesive Application Equipment Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Adhesive Application Equipment Market Size Forecast by Applications
6.2.1 Automotive
6.2.2 Construction
6.2.3 Packaging
6.2.4 Electronics
6.2.5 Additives
6.2.6 Apparel
6.2.7 Labeling and Mailing
6.2.8 Aerospace
6.2.9 Other
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Adhesive Application Equipment Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Adhesive Application Equipment Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Adhesive Application Equipment Analysis and Forecast
9.1 Introduction
9.2 North America Adhesive Application Equipment Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Adhesive Application Equipment Market Size Forecast by Type
9.6.1 Handgun
9.6.2 Automated Pneumatic Gun
9.6.3 Automated Electric Gun
9.6.4 Jetting
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Adhesive Application Equipment Market Size Forecast by Applications
9.10.1 Automotive
9.10.2 Construction
9.10.3 Packaging
9.10.4 Electronics
9.10.5 Additives
9.10.6 Apparel
9.10.7 Labeling and Mailing
9.10.8 Aerospace
9.10.9 Other
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Adhesive Application Equipment Analysis and Forecast
10.1 Introduction
10.2 Europe Adhesive Application Equipment Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Adhesive Application Equipment Market Size Forecast by Type
10.6.1 Handgun
10.6.2 Automated Pneumatic Gun
10.6.3 Automated Electric Gun
10.6.4 Jetting
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Adhesive Application Equipment Market Size Forecast by Applications
10.10.1 Automotive
10.10.2 Construction
10.10.3 Packaging
10.10.4 Electronics
10.10.5 Additives
10.10.6 Apparel
10.10.7 Labeling and Mailing
10.10.8 Aerospace
10.10.9 Other
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Adhesive Application Equipment Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Adhesive Application Equipment Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Adhesive Application Equipment Market Size Forecast by Type
11.6.1 Handgun
11.6.2 Automated Pneumatic Gun
11.6.3 Automated Electric Gun
11.6.4 Jetting
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Adhesive Application Equipment Market Size Forecast by Applications
11.10.1 Automotive
11.10.2 Construction
11.10.3 Packaging
11.10.4 Electronics
11.10.5 Additives
11.10.6 Apparel
11.10.7 Labeling and Mailing
11.10.8 Aerospace
11.10.9 Other
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Adhesive Application Equipment Analysis and Forecast
12.1 Introduction
12.2 Latin America Adhesive Application Equipment Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Adhesive Application Equipment Market Size Forecast by Type
12.6.1 Handgun
12.6.2 Automated Pneumatic Gun
12.6.3 Automated Electric Gun
12.6.4 Jetting
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Adhesive Application Equipment Market Size Forecast by Applications
12.10.1 Automotive
12.10.2 Construction
12.10.3 Packaging
12.10.4 Electronics
12.10.5 Additives
12.10.6 Apparel
12.10.7 Labeling and Mailing
12.10.8 Aerospace
12.10.9 Other
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Adhesive Application Equipment Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Adhesive Application Equipment Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Adhesive Application Equipment Market Size Forecast by Type
13.6.1 Handgun
13.6.2 Automated Pneumatic Gun
13.6.3 Automated Electric Gun
13.6.4 Jetting
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Adhesive Application Equipment Market Size Forecast by Applications
13.10.1 Automotive
13.10.2 Construction
13.10.3 Packaging
13.10.4 Electronics
13.10.5 Additives
13.10.6 Apparel
13.10.7 Labeling and Mailing
13.10.8 Aerospace
13.10.9 Other
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Adhesive Application Equipment Market: Competitive Dashboard
14.2 Global Adhesive Application Equipment Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 3M
14.3.2 ITW Dynatec
14.3.3 Jesco Products Company
14.3.4 Preo
14.3.5 The Union Tool Corporation
14.3.6 Fishman Corporation
14.3.7 Nordson Sealant Equipment
14.3.8 Kent Machine
14.3.9 Ttarp Fabricating and Converting Equipment
14.3.10 Fluid Research
14.3.11 3M