Market Overview:
The global adhesiveless flexible copper clad laminate market is expected to grow at a CAGR of 5.5% during the forecast period from 2018 to 2030. The growth in this market can be attributed to the increasing demand for adhesiveless flexible copper clad laminates from various end-use industries, such as aerospace, automotive, consumer electronics, military and others. In terms of type, the single-sided non-adhesive FCCL segment is expected to hold a major share of the global adhesiveless flexible copper clad laminate market during the forecast period. This can be attributed to its low manufacturing cost and easy installation process as compared to other types of FCCLs.
Product Definition:
Adhesiveless Flexible Copper Clad Laminate is a type of laminate which does not require an adhesive to hold the layers together. This type of laminate is often used in high-temperature applications, as it can withstand greater heat than traditional laminates.
Single-sided Non-adhesive FCCL:
Single-sided non-adhesive FCCL is a copper foil laminate with an adhesiveless surface. It has the ability to provide high electrical conductivity and low resistance to electric current at frequencies above 1 GHz. The copper foil laminate can be used in applications such as printed circuit boards (PCB), mobile phones, WLAN equipment, cable TV distribution and others.
Double-sided Non-adhesive FCCL:
Double-sided non-adhesive FCCL is a copper foil laminate with an adhesive on only one side. It can be used in applications where it is desirable to have a conductive path along the edge of an object, but not at its center. Double-sided non-adhesive FCCL provides this conductive path and hence finds application in electrical wires as well as printed circuit boards (PCB).
Application Insights:
The global demand for adhesives in the automotive industry has witnessed a paradigm shift due to rising environmental concerns over vehicle emissions. The use of laminates with superior mechanical and electrical properties is expected to drive the market growth. In addition, stringent regulations on fuel consumption and reduction in vehicular weight are likely to propel product demand over the forecast period.
Flexible copper clad laminate sheets find application across various end-use industries including aerospace, military & defense, electronics & appliances, construction materials and medical equipment among others. The product is widely used across aircraft interiors owing to its moisture resistance feature along with excellent thermal management capabilities which enable high performance at a reduced weight as compared to other materials used for similar purposes such as aluminum or steel sheeting.
Regional Analysis:
Asia Pacific dominated the global market in 2017 and is expected to continue its dominance over the forecast period. The region is home to some of the major aircraft manufacturers such as Boeing, Airbus, and Mitsubishi Heavy Industries. These companies are actively looking for cost-effective materials while simultaneously meeting stringent environmental regulations. Advantages such as low maintenance cost, ease of installation process are anticipated to drive demand from end-users in this region.
The Europe market was valued at USD X million in 2017 owing to high demand from several key application sectors including aerospace & defense and automotive along with growing R&D activities by universities & colleges in Europe pertaining adhesives used across copper clad laminates industry.
North America accounted for a significant share of global revenue due toward presence of prominent players operating within U.S.
Growth Factors:
- Increasing demand for miniaturization in electronic devices
- Rising demand for advanced and high-performance materials in various end-use industries
- Growing trend of using lightweight and thin materials in automotive and aerospace applications
- Proliferation of flexible displays and other next-generation electronics technologies
- Technological advancements that enable higher performance, durability, and reliability of adhesiveless flexible copper clad laminate
Scope Of The Report
Report Attributes
Report Details
Report Title
Adhesiveless Flexible Copper Clad Laminate Market Research Report
By Type
Single-sided Non-adhesive FCCL, Double-sided Non-adhesive FCCL
By Application
Aerospace, Automotive, Consumer Electronics, Military, Others
By Companies
DuPont, Ube Industries, Chang Chun Group, TAIFLEX Scientific, ARISAWA Mfg, NIPPON STEEL Chemical & Material, ThinFlex Corporation, Azotek Co., Ltd, DuPont
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
182
Number of Tables & Figures
128
Customization Available
Yes, the report can be customized as per your need.
Global Adhesiveless Flexible Copper Clad Laminate Market Report Segments:
The global Adhesiveless Flexible Copper Clad Laminate market is segmented on the basis of:
Types
Single-sided Non-adhesive FCCL, Double-sided Non-adhesive FCCL
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Aerospace, Automotive, Consumer Electronics, Military, Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- DuPont
- Ube Industries
- Chang Chun Group
- TAIFLEX Scientific
- ARISAWA Mfg
- NIPPON STEEL Chemical & Material
- ThinFlex Corporation
- Azotek Co., Ltd
- DuPont
Highlights of The Adhesiveless Flexible Copper Clad Laminate Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Single-sided Non-adhesive FCCL
- Double-sided Non-adhesive FCCL
- By Application:
- Aerospace
- Automotive
- Consumer Electronics
- Military
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Adhesiveless Flexible Copper Clad Laminate Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Adhesiveless flexible copper clad laminate (AFCL) is a type of laminate that uses adhesive-free joints. The laminates are made up of two or more sheets of copper that are cladded together with a thin layer of plastic. This allows the laminates to be bent and shaped without breaking, making them ideal for use in applications where flexibility is important, such as solar panels and wind turbines.
Some of the major players in the adhesiveless flexible copper clad laminate market are DuPont, Ube Industries, Chang Chun Group, TAIFLEX Scientific, ARISAWA Mfg, NIPPON STEEL Chemical & Material, ThinFlex Corporation, Azotek Co., Ltd, DuPont.
The adhesiveless flexible copper clad laminate market is expected to register a CAGR of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Adhesiveless Flexible Copper Clad Laminate Market Overview
4.1 Introduction
4.1.1 Market Taxonomy
4.1.2 Market Definition
4.1.3 Macro-Economic Factors Impacting the Market Growth
4.2 Adhesiveless Flexible Copper Clad Laminate Market Dynamics
4.2.1 Market Drivers
4.2.2 Market Restraints
4.2.3 Market Opportunity
4.3 Adhesiveless Flexible Copper Clad Laminate Market - Supply Chain Analysis
4.3.1 List of Key Suppliers
4.3.2 List of Key Distributors
4.3.3 List of Key Consumers
4.4 Key Forces Shaping the Adhesiveless Flexible Copper Clad Laminate Market
4.4.1 Bargaining Power of Suppliers
4.4.2 Bargaining Power of Buyers
4.4.3 Threat of Substitution
4.4.4 Threat of New Entrants
4.4.5 Competitive Rivalry
4.5 Global Adhesiveless Flexible Copper Clad Laminate Market Size & Forecast, 2018-2028
4.5.1 Adhesiveless Flexible Copper Clad Laminate Market Size and Y-o-Y Growth
4.5.2 Adhesiveless Flexible Copper Clad Laminate Market Absolute $ Opportunity
Chapter 5 Global Adhesiveless Flexible Copper Clad Laminate Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Adhesiveless Flexible Copper Clad Laminate Market Size Forecast by Type
5.2.1 Single-sided Non-adhesive FCCL
5.2.2 Double-sided Non-adhesive FCCL
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Adhesiveless Flexible Copper Clad Laminate Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Adhesiveless Flexible Copper Clad Laminate Market Size Forecast by Applications
6.2.1 Aerospace
6.2.2 Automotive
6.2.3 Consumer Electronics
6.2.4 Military
6.2.5 Others
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Adhesiveless Flexible Copper Clad Laminate Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Adhesiveless Flexible Copper Clad Laminate Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Adhesiveless Flexible Copper Clad Laminate Analysis and Forecast
9.1 Introduction
9.2 North America Adhesiveless Flexible Copper Clad Laminate Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Adhesiveless Flexible Copper Clad Laminate Market Size Forecast by Type
9.6.1 Single-sided Non-adhesive FCCL
9.6.2 Double-sided Non-adhesive FCCL
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Adhesiveless Flexible Copper Clad Laminate Market Size Forecast by Applications
9.10.1 Aerospace
9.10.2 Automotive
9.10.3 Consumer Electronics
9.10.4 Military
9.10.5 Others
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Adhesiveless Flexible Copper Clad Laminate Analysis and Forecast
10.1 Introduction
10.2 Europe Adhesiveless Flexible Copper Clad Laminate Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Adhesiveless Flexible Copper Clad Laminate Market Size Forecast by Type
10.6.1 Single-sided Non-adhesive FCCL
10.6.2 Double-sided Non-adhesive FCCL
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Adhesiveless Flexible Copper Clad Laminate Market Size Forecast by Applications
10.10.1 Aerospace
10.10.2 Automotive
10.10.3 Consumer Electronics
10.10.4 Military
10.10.5 Others
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Adhesiveless Flexible Copper Clad Laminate Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Adhesiveless Flexible Copper Clad Laminate Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Adhesiveless Flexible Copper Clad Laminate Market Size Forecast by Type
11.6.1 Single-sided Non-adhesive FCCL
11.6.2 Double-sided Non-adhesive FCCL
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Adhesiveless Flexible Copper Clad Laminate Market Size Forecast by Applications
11.10.1 Aerospace
11.10.2 Automotive
11.10.3 Consumer Electronics
11.10.4 Military
11.10.5 Others
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Adhesiveless Flexible Copper Clad Laminate Analysis and Forecast
12.1 Introduction
12.2 Latin America Adhesiveless Flexible Copper Clad Laminate Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Adhesiveless Flexible Copper Clad Laminate Market Size Forecast by Type
12.6.1 Single-sided Non-adhesive FCCL
12.6.2 Double-sided Non-adhesive FCCL
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Adhesiveless Flexible Copper Clad Laminate Market Size Forecast by Applications
12.10.1 Aerospace
12.10.2 Automotive
12.10.3 Consumer Electronics
12.10.4 Military
12.10.5 Others
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Adhesiveless Flexible Copper Clad Laminate Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Adhesiveless Flexible Copper Clad Laminate Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Adhesiveless Flexible Copper Clad Laminate Market Size Forecast by Type
13.6.1 Single-sided Non-adhesive FCCL
13.6.2 Double-sided Non-adhesive FCCL
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Adhesiveless Flexible Copper Clad Laminate Market Size Forecast by Applications
13.10.1 Aerospace
13.10.2 Automotive
13.10.3 Consumer Electronics
13.10.4 Military
13.10.5 Others
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Adhesiveless Flexible Copper Clad Laminate Market: Competitive Dashboard
14.2 Global Adhesiveless Flexible Copper Clad Laminate Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 DuPont
14.3.2 Ube Industries
14.3.3 Chang Chun Group
14.3.4 TAIFLEX Scientific
14.3.5 ARISAWA Mfg
14.3.6 NIPPON STEEL Chemical & Material
14.3.7 ThinFlex Corporation
14.3.8 Azotek Co., Ltd
14.3.9 DuPont
