Market Overview:
The global aircraft lavatory market is estimated to be valued at US$ 1,362.8 Mn in 2018 and is projected to register a CAGR of 5.1% over the forecast period (2018-2030), according to a new study by Persistence Market Research (PMR). The market is segmented on the basis of type, application and region. On the basis of type, the market has been segmented into toilet, commode and ash bin. The toilet segment is expected to account for maximum revenue share in 2018 and register highest CAGR during the forecast period. This can be attributed to increasing demand for toilets from low-cost carriers as well as business jets across regions. On the basis of application, aircraft lavatories are broadly classified into narrow-body aircrafts and wide-body aircrafts segments. In terms of value, wide-body aircrafts are expected to account for larger share in global Aircraft Lavatory Market than narrow body ones through 2030; however, CAGR registered by this category would be lower as compared with that achieved by narrow body category over same forecast period .
Product Definition:
An airplane lavatory is a small room on an aircraft where passengers can go to use the toilet or dispose of rubbish. The importance of an airplane lavatory is that it provides a place for passengers to relieve themselves and discard waste.
Toilet:
The global toilet market is expected to witness significant growth over the forecast period. The primary factor responsible for this growth is aviation industry expansion, particularly commercial aviation. In addition, rising disposable income and standard of living are also contributing to the demand for toilets in aircraft lavatories.
Aviation has been witnessing rapid expansion in recent years due to growing passenger traffic and increased air freight rates which has resulted in an increased number of airports worldwide.
Commode:
Commode is a device used to get in and out of toilet seats in aircraft. It consists of a seat, handle, and wheels. The commode is installed at the rear end of the toilet on most commercial flights. On smaller planes or when there’s only one lavatory on board, the commode may be placed at an intermediate position between toilet and sink so that both hands are free while using it.
Application Insights:
By application, the aircraft lavatory market is segmented into norrow-body aircrafts, wide-body aircrafts and others. The others segment includes regional jets, business aviation and military Aircraft Lavatories. Regional jets are expected to witness significant growth over the forecast period owing to their ability to reach shorter distances with fewer stops as compared to wide-body aircraft. Furthermore, rising demand for premium class service in these types of jetliners is expected drive demand further.
The norrow-body Aircraft Lavatory Market was valued at USD 1.5 billion in 2017 and is projected grow at a CAGR of XX% from 2018 to 2030 driven by increasing production rates of this type of jetliner coupled with high consumer preference for luxury travel experience across various regions globally including North America.
Regional Analysis:
North America dominated the global aircraft lavatory market in 2016 with a revenue share of over 35%. The region is expected to witness a considerable growth rate during the forecast period. This can be attributed to increasing air travel and growing healthcare tourism industry in countries, such as Canada and U.S. Moreover, rising geriatric population that requires long-term care at home is anticipated to drive demand for commodes in this region.
Asia Pacific is expected to register the fastest CAGR from 2017 to 2030 owing high growth potential of aviation sector coupled with increasing medical tourism industry across emerging economies including China, India, Malaysia and Thailand among others will boost demand for these products over next eight years.
Growth Factors:
- Increasing demand for air travel: The global air passenger traffic is expected to grow at a CAGR of 5.4% from 2016 to 2036, according to the International Air Transport Association (IATA). This will result in the need for more aircraft, which in turn will lead to an increase in the demand for aircraft lavatories.
- Technological advancements: Aircraft lavatory manufacturers are constantly innovating and introducing new technologies that improve the functionality and comfort of their products. For instance, Airbus has developed a self-cleaning lavatory that uses ultraviolet light and water jets to clean surfaces automatically after each use. Such advancements are likely to boost demand for aircraft lavatories in the coming years.
- Regulatory changes: In recent years, there has been an increase in regulatory requirements pertaining to aircraft lavatories across different regions of the world. These regulations mandate certain features such as anti-slip flooring and hands-free faucets, which are intended to improve passenger safety and comfort levels respectively . Such developments are likely to spur growth in the global market for aircraft lavatories over the forecast period .
Scope Of The Report
Report Attributes
Report Details
Report Title
Aircraft Lavatory Market Research Report
By Type
Toilet, Commode, Ash Bin, Others
By Application
Norrow-body Aircrafts, Wide-body Aircrafts, Others
By Companies
Inland Technologies, Rockwell Collins, Yokohama, Jamco Corp, Aerocare International, Adams Rite Aerospace, Inland Technologies
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
223
Number of Tables & Figures
157
Customization Available
Yes, the report can be customized as per your need.
Global Aircraft Lavatory Market Report Segments:
The global Aircraft Lavatory market is segmented on the basis of:
Types
Toilet, Commode, Ash Bin, Others
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Norrow-body Aircrafts, Wide-body Aircrafts, Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Inland Technologies
- Rockwell Collins
- Yokohama
- Jamco Corp
- Aerocare International
- Adams Rite Aerospace
- Inland Technologies
Highlights of The Aircraft Lavatory Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Toilet
- Commode
- Ash Bin
- Others
- By Application:
- Norrow-body Aircrafts
- Wide-body Aircrafts
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Aircraft Lavatory Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
An aircraft lavatory is a facility on an aircraft for the disposal of human waste.
Some of the major players in the aircraft lavatory market are Inland Technologies, Rockwell Collins, Yokohama, Jamco Corp, Aerocare International, Adams Rite Aerospace, Inland Technologies.
The aircraft lavatory market is expected to register a CAGR of 5.1%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Aircraft Lavatory Market Overview
4.1 Introduction
4.1.1 Market Taxonomy
4.1.2 Market Definition
4.1.3 Macro-Economic Factors Impacting the Market Growth
4.2 Aircraft Lavatory Market Dynamics
4.2.1 Market Drivers
4.2.2 Market Restraints
4.2.3 Market Opportunity
4.3 Aircraft Lavatory Market - Supply Chain Analysis
4.3.1 List of Key Suppliers
4.3.2 List of Key Distributors
4.3.3 List of Key Consumers
4.4 Key Forces Shaping the Aircraft Lavatory Market
4.4.1 Bargaining Power of Suppliers
4.4.2 Bargaining Power of Buyers
4.4.3 Threat of Substitution
4.4.4 Threat of New Entrants
4.4.5 Competitive Rivalry
4.5 Global Aircraft Lavatory Market Size & Forecast, 2020-2028
4.5.1 Aircraft Lavatory Market Size and Y-o-Y Growth
4.5.2 Aircraft Lavatory Market Absolute $ Opportunity
Chapter 5 Global Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Market Size Forecast by Type
5.2.1 Toilet
5.2.2 Commode
5.2.3 Ash Bin
5.2.4 Others
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Market Size Forecast by Applications
6.2.1 Norrow-body Aircrafts
6.2.2 Wide-body Aircrafts
6.2.3 Others
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Aircraft Lavatory Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Aircraft Lavatory Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Analysis and Forecast
9.1 Introduction
9.2 North America Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Market Size Forecast by Type
9.6.1 Toilet
9.6.2 Commode
9.6.3 Ash Bin
9.6.4 Others
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Market Size Forecast by Applications
9.10.1 Norrow-body Aircrafts
9.10.2 Wide-body Aircrafts
9.10.3 Others
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Analysis and Forecast
10.1 Introduction
10.2 Europe Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Market Size Forecast by Type
10.6.1 Toilet
10.6.2 Commode
10.6.3 Ash Bin
10.6.4 Others
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Market Size Forecast by Applications
10.10.1 Norrow-body Aircrafts
10.10.2 Wide-body Aircrafts
10.10.3 Others
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Market Size Forecast by Type
11.6.1 Toilet
11.6.2 Commode
11.6.3 Ash Bin
11.6.4 Others
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Market Size Forecast by Applications
11.10.1 Norrow-body Aircrafts
11.10.2 Wide-body Aircrafts
11.10.3 Others
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Analysis and Forecast
12.1 Introduction
12.2 Latin America Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Market Size Forecast by Type
12.6.1 Toilet
12.6.2 Commode
12.6.3 Ash Bin
12.6.4 Others
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Market Size Forecast by Applications
12.10.1 Norrow-body Aircrafts
12.10.2 Wide-body Aircrafts
12.10.3 Others
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Market Size Forecast by Type
13.6.1 Toilet
13.6.2 Commode
13.6.3 Ash Bin
13.6.4 Others
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Market Size Forecast by Applications
13.10.1 Norrow-body Aircrafts
13.10.2 Wide-body Aircrafts
13.10.3 Others
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Aircraft Lavatory Market: Competitive Dashboard
14.2 Global Aircraft Lavatory Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Inland Technologies
14.3.2 Rockwell Collins
14.3.3 Yokohama
14.3.4 Jamco Corp
14.3.5 Aerocare International
14.3.6 Adams Rite Aerospace
14.3.7 Inland Technologies
