Market Overview:
The global airpalnes landing gear market is expected to grow at a CAGR of 5.5% during the forecast period from 2018 to 2030. The main landing gear segment is expected to hold the largest share of the market in terms of value, while the nose landing gear segment is projected to grow at a higher CAGR during the forecast period. In terms of application, the narrow-body aircraft segment is estimated to account for a larger share of the global airpalnes landing gear market in 2018. However, over time, as demand for wide-body and regional aircraft increases, their respective shares are anticipated to increase significantly.
Product Definition:
Airplanes landing gear are the undercarriage of an aircraft that supports it when it is stationary or moving on the ground. The main landing gear is typically made up of two large, sturdy wheels and a set of smaller wheels located near the nose of the aircraft. Some airplanes also have a tail wheel, which helps keep the plane stable while taxiing. Landing gear are critical for safe airplane operation; they provide support while taxing, takeoff and landing.
Main Landing Gear:
The main landing gear is the largest and most prominent component of an aircraft's landing gear. It is a wheel or set of wheels that are fixed to the rear end of each wing in an airplane, helicopter, or spacecraft. The function of a main landing gear is to help reduce the speed of impact when coming down onto a paved surface from flying at high speeds and enable safe ground handling for passengers and cargo.
Nose Landing Gear:
Nose landing gear is a type of aircraft landing gear that is mounted on the nose of an aircraft. It assists in slowing down and stabilizing the craft during ground operations. Nose landing gears are retractable and have integral shock absorbers to protect the airframe from damage due to contact with the runway surface.
Application Insights:
The narrow-body aircraft application segment accounted for the largest share of over 50.0% in 2017 and is expected to continue its dominance over the forecast period. The demand for these systems is generally higher on account of shorter takeoff and landing distances, which require a reduced system angle of attack to maintain stability during operations. Moreover, owing to low passenger loads carried by narrow-body aircraft as compared with wide-body aircraft, nose gear systems are not required as much as main landing gears do in case of narrow-body aircraft. This further reduces the overall market demand for airpalnes landing gear systems significantly.
Wide-bodied Aircraft (Jumbo Jets) are generally equipped with three sets of airpalne operating equipment including main.
Regional Analysis:
The Asia Pacific dominated the global airpalnes landing gear market in 2017. The region is expected to witness significant growth over the forecast period owing to increasing demand for new aircraft from developing countries such as India and China. In addition, rising disposable income of consumers and rapid urbanization are also expected to drive the regional market over the next eight years.
Europe accounted for a major share in terms of revenue in 2017 due to stringent regulations by regulatory bodies such as EASA, FAA, ICAO coupled with high standards set by manufacturers regarding safety features on board aircraft. These factors are anticipated to boost regional product demand over the forecast period.
North America accounted for a significant share owing to growing trend towards replacement or upgrade existing fleet of aircraft operated by airlines across U S.
Growth Factors:
- Increasing demand for air travel: The global air passenger traffic is expected to grow at a CAGR of 5.4% from 2016 to 2036, according to the International Air Transport Association (IATA). This will result in an increase in the demand for new and replacement landing gear systems.
- Technological advancements: Aircraft manufacturers are constantly working on developing new and innovative technologies that can improve the performance of aircraft systems, including landing gear systems. This will spur growth in the market for Airpalnes Landing Gear over the forecast period.
- Stringent safety regulations: Stringent safety regulations by aviation authorities across the world are driving airlines and aircraft manufacturers towards adopting more advanced landing gear systems. This is expected to boost growth prospects for Airpalnes Landing Gear market during the forecast period.
Scope Of The Report
Report Attributes
Report Details
Report Title
Airpalnes Landing Gear Market Research Report
By Type
Main Landing Gear, Nose Landing Gear
By Application
Narrow-body Aircraft, Wide-body Aircraft, Regional Aircraft
By Companies
UTC Aerospace Systems, Heroux-Devtek Inc, Safran Landing Systems, APPH, Liebherr, CIRCOR Aerospace, GKN Aerospace, AAR Corporation, Collins Aerospace, UTC Aerospace Systems
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
203
Number of Tables & Figures
143
Customization Available
Yes, the report can be customized as per your need.
Global Airpalnes Landing Gear Market Report Segments:
The global Airpalnes Landing Gear market is segmented on the basis of:
Types
Main Landing Gear, Nose Landing Gear
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Narrow-body Aircraft, Wide-body Aircraft, Regional Aircraft
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- UTC Aerospace Systems
- Heroux-Devtek Inc
- Safran Landing Systems
- APPH
- Liebherr
- CIRCOR Aerospace
- GKN Aerospace
- AAR Corporation
- Collins Aerospace
- UTC Aerospace Systems
Highlights of The Airpalnes Landing Gear Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Main Landing Gear
- Nose Landing Gear
- By Application:
- Narrow-body Aircraft
- Wide-body Aircraft
- Regional Aircraft
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Airpalnes Landing Gear Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Airpalnes Landing Gear is a type of aircraft landing gear that uses compressed air to provide lift and stability during landing.
Some of the major players in the airpalnes landing gear market are UTC Aerospace Systems, Heroux-Devtek Inc, Safran Landing Systems, APPH, Liebherr, CIRCOR Aerospace, GKN Aerospace, AAR Corporation, Collins Aerospace, UTC Aerospace Systems.
The airpalnes landing gear market is expected to register a CAGR of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Airpalnes Landing Gear Market Overview 4.1 Introduction 4.1.1 Market Taxonomy 4.1.2 Market Definition 4.1.3 Macro-Economic Factors Impacting the Market Growth 4.2 Airpalnes Landing Gear Market Dynamics 4.2.1 Market Drivers 4.2.2 Market Restraints 4.2.3 Market Opportunity 4.3 Airpalnes Landing Gear Market - Supply Chain Analysis 4.3.1 List of Key Suppliers 4.3.2 List of Key Distributors 4.3.3 List of Key Consumers 4.4 Key Forces Shaping the Airpalnes Landing Gear Market 4.4.1 Bargaining Power of Suppliers 4.4.2 Bargaining Power of Buyers 4.4.3 Threat of Substitution 4.4.4 Threat of New Entrants 4.4.5 Competitive Rivalry 4.5 Global Airpalnes Landing Gear Market Size & Forecast, 2018-2028 4.5.1 Airpalnes Landing Gear Market Size and Y-o-Y Growth 4.5.2 Airpalnes Landing Gear Market Absolute $ Opportunity
Chapter 5 Global Airpalnes Landing Gear Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Airpalnes Landing Gear Market Size Forecast by Type
5.2.1 Main Landing Gear
5.2.2 Nose Landing Gear
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Airpalnes Landing Gear Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Airpalnes Landing Gear Market Size Forecast by Applications
6.2.1 Narrow-body Aircraft
6.2.2 Wide-body Aircraft
6.2.3 Regional Aircraft
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Airpalnes Landing Gear Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Airpalnes Landing Gear Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Airpalnes Landing Gear Analysis and Forecast
9.1 Introduction
9.2 North America Airpalnes Landing Gear Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Airpalnes Landing Gear Market Size Forecast by Type
9.6.1 Main Landing Gear
9.6.2 Nose Landing Gear
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Airpalnes Landing Gear Market Size Forecast by Applications
9.10.1 Narrow-body Aircraft
9.10.2 Wide-body Aircraft
9.10.3 Regional Aircraft
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Airpalnes Landing Gear Analysis and Forecast
10.1 Introduction
10.2 Europe Airpalnes Landing Gear Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Airpalnes Landing Gear Market Size Forecast by Type
10.6.1 Main Landing Gear
10.6.2 Nose Landing Gear
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Airpalnes Landing Gear Market Size Forecast by Applications
10.10.1 Narrow-body Aircraft
10.10.2 Wide-body Aircraft
10.10.3 Regional Aircraft
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Airpalnes Landing Gear Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Airpalnes Landing Gear Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Airpalnes Landing Gear Market Size Forecast by Type
11.6.1 Main Landing Gear
11.6.2 Nose Landing Gear
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Airpalnes Landing Gear Market Size Forecast by Applications
11.10.1 Narrow-body Aircraft
11.10.2 Wide-body Aircraft
11.10.3 Regional Aircraft
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Airpalnes Landing Gear Analysis and Forecast
12.1 Introduction
12.2 Latin America Airpalnes Landing Gear Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Airpalnes Landing Gear Market Size Forecast by Type
12.6.1 Main Landing Gear
12.6.2 Nose Landing Gear
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Airpalnes Landing Gear Market Size Forecast by Applications
12.10.1 Narrow-body Aircraft
12.10.2 Wide-body Aircraft
12.10.3 Regional Aircraft
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Airpalnes Landing Gear Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Airpalnes Landing Gear Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Airpalnes Landing Gear Market Size Forecast by Type
13.6.1 Main Landing Gear
13.6.2 Nose Landing Gear
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Airpalnes Landing Gear Market Size Forecast by Applications
13.10.1 Narrow-body Aircraft
13.10.2 Wide-body Aircraft
13.10.3 Regional Aircraft
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Airpalnes Landing Gear Market: Competitive Dashboard
14.2 Global Airpalnes Landing Gear Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 UTC Aerospace Systems
14.3.2 Heroux-Devtek Inc
14.3.3 Safran Landing Systems
14.3.4 APPH
14.3.5 Liebherr
14.3.6 CIRCOR Aerospace
14.3.7 GKN Aerospace
14.3.8 AAR Corporation
14.3.9 Collins Aerospace
14.3.10 UTC Aerospace Systems