Market Overview:
The global brake master cylinder market is estimated to be valued at US$ XX Mn in 2018 and is projected to reach US$ XX Mn by 2030, exhibiting a CAGR of X.X%. The brake master cylinder market is segmented on the basis of type, application and region. On the basis of type, the brake master cylinder market is segmented into single-cylinder and tandem-cylinder. On the basis of application, the brake master cylinder market is segmented into passenger vehicle and commercial vehicle. Region wise, the brake master cylinder market has been segmented into North America, Latin America, Europe Asia Pacific (APAC) and Middle East & Africa (MEA). The growth of global automotive industry has led to an increase in demand for automobiles across all regions. This in turn has resulted in an increase in demand for braking systems across all applications segments including passenger vehicles as well as commercial vehicles.
Product Definition:
The brake master cylinder is the component of a vehicle's braking system that supplies hydraulic pressure to the brakes. The importance of the brake master cylinder is twofold: first, it provides the necessary pressure to activate the brakes; and second, it helps to maintain a consistent level of hydraulic pressure at all times, regardless of how much force is being applied to the brake pedal.
Single-cylinder:
Single-cylinder is a mechanical device used in brake systems of automobiles. It is also known as the handbrake or parking brake, which has one disk for applying brakes on one side and a mechanism for releasing the pressure on that same side only when needed. The single-cylinder system can be applied by foot or automatically through the gear stick in some vehicles.
The market size was valued at USD 1,24 billion in 2015.
Tandem Cylinder:
The tandem cylinder is a device used in automotive brake systems to provide additional braking force. The master cylinder controls the pressure applied to the brakes and provides an output that drives all four caliper pistons. A typical automotive setup has a rear wheel drive vehicle with two front tires which have individual circuits for applying brakes, this system works on the principle of leverage, as one tire applies more force than the other when both are pressed simultaneously resulting in increased braking power.
Application Insights:
The passenger vehicle application segment led the market and accounted for more than 70.0% share of the global revenue in 2017. The segment will expand further at a steady CAGR from 2018 to 2030 owing to increasing demand for passenger vehicles, especially in developed regions such as North America and Europe. In addition, stringent government regulations regarding airbags installation in commercial vehicles are expected to increase the use of brake master cylinders for mounting airbags, thereby driving product demand over the forecast period.
Commercial vehicle applications include trucks, buses and coaches among others; they form an essential part of any transportation system as they provide vital services on a daily basis across various industries worldwide.
Regional Analysis:
Asia Pacific dominated the global market in 2017 and is expected to continue its dominance over the forecast period. The region accounted for a share of more than 60% in terms of volume owing to high demand from developing countries such as India, China, and Japan. Moreover, increasing automotive production coupled with stringent government regulations regarding vehicle safety is anticipated to drive regional growth over the forecast period.
The European market was valued at USD X billion in 2017 and is projected to witness significant growth during the forecast years on account of rising investments by key players for development of advanced automotive braking systems coupled with growing emphasis on vehicle safety standards by regulatory bodies such as ETSI (European Telematics Standards Institute). North America held a substantial share in terms of revenue due mainly to presence major automobile manufacturers including Ford Motor Company; General Motors Company; BMW Group; Fiat Chrysler Automobiles N.V.; Nissan Motor Corporation; Toyota Industries Corporation etc., In addition, presence various industry participants including Magna International Inc.
Growth Factors:
- Increasing demand for automobiles
- Growing automotive industry
- Rising disposable income of consumers
- Technological advancements in brake systems
- Stringent government regulations for vehicle safety
Scope Of The Report
Report Attributes
Report Details
Report Title
Automobile Brake Master Cylinder Market Research Report
By Type
Single-cylinder, Tandem Cylinder
By Application
Passenger Vehicle, Commercial Vehicle
By Companies
ZF, Aisin, Bosch, Rodova, Endurance Technologies, Metelli, Cardone, Girling, Federal-Mogul Motorparts, Nissin Kogyo, Mando, APG
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
160
Number of Tables & Figures
112
Customization Available
Yes, the report can be customized as per your need.
Global Automobile Brake Master Cylinder Market Report Segments:
The global Automobile Brake Master Cylinder market is segmented on the basis of:
Types
Single-cylinder, Tandem Cylinder
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Passenger Vehicle, Commercial Vehicle
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- ZF
- Aisin
- Bosch
- Rodova
- Endurance Technologies
- Metelli
- Cardone
- Girling
- Federal-Mogul Motorparts
- Nissin Kogyo
- Mando
- APG
Highlights of The Automobile Brake Master Cylinder Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Single-cylinder
- Tandem Cylinder
- By Application:
- Passenger Vehicle
- Commercial Vehicle
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Automobile Brake Master Cylinder Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
The Automobile Brake Master Cylinder is a component of the braking system in an automobile. It is a cylinder that sits between the brake pedal and the brake caliper, and it controls how much pressure is applied to the brakes.
Some of the key players operating in the automobile brake master cylinder market are ZF, Aisin, Bosch, Rodova, Endurance Technologies, Metelli, Cardone, Girling, Federal-Mogul Motorparts, Nissin Kogyo, Mando, APG.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Automobile Brake Master Cylinder Market Overview
4.1 Introduction
4.1.1 Market Taxonomy
4.1.2 Market Definition
4.1.3 Macro-Economic Factors Impacting the Market Growth
4.2 Automobile Brake Master Cylinder Market Dynamics
4.2.1 Market Drivers
4.2.2 Market Restraints
4.2.3 Market Opportunity
4.3 Automobile Brake Master Cylinder Market - Supply Chain Analysis
4.3.1 List of Key Suppliers
4.3.2 List of Key Distributors
4.3.3 List of Key Consumers
4.4 Key Forces Shaping the Automobile Brake Master Cylinder Market
4.4.1 Bargaining Power of Suppliers
4.4.2 Bargaining Power of Buyers
4.4.3 Threat of Substitution
4.4.4 Threat of New Entrants
4.4.5 Competitive Rivalry
4.5 Global Automobile Brake Master Cylinder Market Size & Forecast, 2018-2028
4.5.1 Automobile Brake Master Cylinder Market Size and Y-o-Y Growth
4.5.2 Automobile Brake Master Cylinder Market Absolute $ Opportunity
Chapter 5 Global Automobile Brake Master Cylinder Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Automobile Brake Master Cylinder Market Size Forecast by Type
5.2.1 Single-cylinder
5.2.2 Tandem Cylinder
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Automobile Brake Master Cylinder Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Automobile Brake Master Cylinder Market Size Forecast by Applications
6.2.1 Passenger Vehicle
6.2.2 Commercial Vehicle
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Automobile Brake Master Cylinder Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Automobile Brake Master Cylinder Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Automobile Brake Master Cylinder Analysis and Forecast
9.1 Introduction
9.2 North America Automobile Brake Master Cylinder Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Automobile Brake Master Cylinder Market Size Forecast by Type
9.6.1 Single-cylinder
9.6.2 Tandem Cylinder
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Automobile Brake Master Cylinder Market Size Forecast by Applications
9.10.1 Passenger Vehicle
9.10.2 Commercial Vehicle
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Automobile Brake Master Cylinder Analysis and Forecast
10.1 Introduction
10.2 Europe Automobile Brake Master Cylinder Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Automobile Brake Master Cylinder Market Size Forecast by Type
10.6.1 Single-cylinder
10.6.2 Tandem Cylinder
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Automobile Brake Master Cylinder Market Size Forecast by Applications
10.10.1 Passenger Vehicle
10.10.2 Commercial Vehicle
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Automobile Brake Master Cylinder Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Automobile Brake Master Cylinder Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Automobile Brake Master Cylinder Market Size Forecast by Type
11.6.1 Single-cylinder
11.6.2 Tandem Cylinder
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Automobile Brake Master Cylinder Market Size Forecast by Applications
11.10.1 Passenger Vehicle
11.10.2 Commercial Vehicle
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Automobile Brake Master Cylinder Analysis and Forecast
12.1 Introduction
12.2 Latin America Automobile Brake Master Cylinder Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Automobile Brake Master Cylinder Market Size Forecast by Type
12.6.1 Single-cylinder
12.6.2 Tandem Cylinder
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Automobile Brake Master Cylinder Market Size Forecast by Applications
12.10.1 Passenger Vehicle
12.10.2 Commercial Vehicle
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Automobile Brake Master Cylinder Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Automobile Brake Master Cylinder Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Automobile Brake Master Cylinder Market Size Forecast by Type
13.6.1 Single-cylinder
13.6.2 Tandem Cylinder
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Automobile Brake Master Cylinder Market Size Forecast by Applications
13.10.1 Passenger Vehicle
13.10.2 Commercial Vehicle
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Automobile Brake Master Cylinder Market: Competitive Dashboard
14.2 Global Automobile Brake Master Cylinder Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 ZF
14.3.2 Aisin
14.3.3 Bosch
14.3.4 Rodova
14.3.5 Endurance Technologies
14.3.6 Metelli
14.3.7 Cardone
14.3.8 Girling
14.3.9 Federal-Mogul Motorparts
14.3.10 Nissin Kogyo
14.3.11 Mando
14.3.12 APG
