Market Overview:
The global automobile cast camshaft market is estimated to be valued at US$ XX Mn in 2018 and is projected to reach US$ XX Mn by 2030, exhibiting a CAGR of X.X% during the forecast period. The growth of the global automobile cast camshaft market can be attributed to the increasing demand for automobiles across the globe. Additionally, factors such as rising disposable income and technological advancements are expected to fuel the growth of the global automobile cast camshaft market over the forecast period. On basis of type, alloy cast iron camshafts are expected to account for a major share in terms of revenue in 2018 and is anticipated to register highest CAGR over next 10 years owing its properties including high tensile strength and wear resistance as compared with other types available in market.
Product Definition:
An automobile cast camshaft is a metal shaft that has cams machined into it. The cams are used to control the opening and closing of the valves in the engine. The cast camshaft is an important part of the engine because it helps to control the airflow into and out of the engine.
Alloy Cast Iron Camshafts:
Alloy cast iron camshafts are used in passenger cars and commercial vehicles. They are economical, have low friction properties and can be manufactured easily. These factors make it suitable for automobile manufacturers to use as a substitute for forged aluminum or steel camshafts.
Ductile Iron Camshafts:
Ductile iron camshafts are used in automobile cast camshaft market. Cast Camshaft is made up of ductile iron and it’s used for removing the blockage from the arteries of the engine which helps to get rid of any rust formation in valves, piston or bearings.
Application Insights:
OEMs held the largest market share of over 70% in 2017. The OEMs prefer to manufacture their vehicles locally, which leads to higher camshaft production as compared to aftermarket or the replacement segment. OEMs prefer not importing components from other countries and hence opt for local suppliers who can provide them with better discounts and subsidies. This trend is expected to continue over the forecast period, further driving up demand for automotive cast camshaft globally.
The replacement segment is anticipated register a CAGR of XX% from 2018-2030 owing to growing awareness among consumers about upgrading existing vehicle¢â‚¬â„¢s cams based on its performance and mileage estimation ability. Replacement products are manufactured using modern technologies that enable easy installation process while improving engine performance at a reasonable cost as compared with original equipment manufacturers (OEM).
Regional Analysis:
Asia Pacific is anticipated to be the fastest-growing region, registering a CAGR of XX% from 2018 to 2030. The growth can be attributed to increasing automobile production in countries such as India and China owing to low manufacturing cost coupled with easy availability of labor and raw materials. In addition, rising disposable income levels in emerging economies are expected to fuel demand for passenger cars over the forecast period.
The European market accounted for a significant share of global revenue in 2017 owing to high demand from Germany and other Eastern European countries where automotive industry is dominant (Slovenia, Croatia).
Growth Factors:
- Increasing demand for automobiles due to rising population and income levels in developing countries
- Technological advancements in cast camshaft manufacturing process that improve the performance of automobiles
- Growing popularity of diesel engines in passenger vehicles that require cast camshafts for their operation
- Stringent emission norms by regulatory authorities across the globe that promote use of high-performance cast camshafts in automobiles
- Rising demand for luxury and sports cars that require advanced cast camshaft technology
Scope Of The Report
Report Attributes
Report Details
Report Title
Automobile Cast Camshaft Market Research Report
By Type
Alloy Cast Iron Camshafts, Ductile Iron Camshafts, Other
By Application
OEM, Aftermarket
By Companies
COMP Performance Group, Camcraft Cams, Newman Cams, Bharat Forge, Estas Camshaft, Precision Camshafts, ThyssenKrupp, CWC, Musashi, MAHLE GmbH, PCL India, Kautex, JD Norman Industries, Schrick Camshaft
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
246
Number of Tables & Figures
173
Customization Available
Yes, the report can be customized as per your need.
Global Automobile Cast Camshaft Market Report Segments:
The global Automobile Cast Camshaft market is segmented on the basis of:
Types
Alloy Cast Iron Camshafts, Ductile Iron Camshafts, Other
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
OEM, Aftermarket
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- COMP Performance Group
- Camcraft Cams
- Newman Cams
- Bharat Forge
- Estas Camshaft
- Precision Camshafts
- ThyssenKrupp
- CWC
- Musashi
- MAHLE GmbH
- PCL India
- Kautex
- JD Norman Industries
- Schrick Camshaft
Highlights of The Automobile Cast Camshaft Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Alloy Cast Iron Camshafts
- Ductile Iron Camshafts
- Other
- By Application:
- OEM
- Aftermarket
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Automobile Cast Camshaft Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Automobile Cast Camshaft is a type of camshaft that is made from cast iron. It has a longer life than other types of camshafts and can be more easily replaced.
Some of the major companies in the automobile cast camshaft market are COMP Performance Group, Camcraft Cams, Newman Cams, Bharat Forge, Estas Camshaft, Precision Camshafts, ThyssenKrupp, CWC, Musashi, MAHLE GmbH, PCL India, Kautex, JD Norman Industries, Schrick Camshaft.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Automobile Cast Camshaft Market Overview 4.1 Introduction 4.1.1 Market Taxonomy 4.1.2 Market Definition 4.1.3 Macro-Economic Factors Impacting the Market Growth 4.2 Automobile Cast Camshaft Market Dynamics 4.2.1 Market Drivers 4.2.2 Market Restraints 4.2.3 Market Opportunity 4.3 Automobile Cast Camshaft Market - Supply Chain Analysis 4.3.1 List of Key Suppliers 4.3.2 List of Key Distributors 4.3.3 List of Key Consumers 4.4 Key Forces Shaping the Automobile Cast Camshaft Market 4.4.1 Bargaining Power of Suppliers 4.4.2 Bargaining Power of Buyers 4.4.3 Threat of Substitution 4.4.4 Threat of New Entrants 4.4.5 Competitive Rivalry 4.5 Global Automobile Cast Camshaft Market Size & Forecast, 2018-2028 4.5.1 Automobile Cast Camshaft Market Size and Y-o-Y Growth 4.5.2 Automobile Cast Camshaft Market Absolute $ Opportunity
Chapter 5 Global Automobile Cast Camshaft Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Automobile Cast Camshaft Market Size Forecast by Type
5.2.1 Alloy Cast Iron Camshafts
5.2.2 Ductile Iron Camshafts
5.2.3 Other
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Automobile Cast Camshaft Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Automobile Cast Camshaft Market Size Forecast by Applications
6.2.1 OEM
6.2.2 Aftermarket
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Automobile Cast Camshaft Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Automobile Cast Camshaft Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Automobile Cast Camshaft Analysis and Forecast
9.1 Introduction
9.2 North America Automobile Cast Camshaft Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Automobile Cast Camshaft Market Size Forecast by Type
9.6.1 Alloy Cast Iron Camshafts
9.6.2 Ductile Iron Camshafts
9.6.3 Other
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Automobile Cast Camshaft Market Size Forecast by Applications
9.10.1 OEM
9.10.2 Aftermarket
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Automobile Cast Camshaft Analysis and Forecast
10.1 Introduction
10.2 Europe Automobile Cast Camshaft Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Automobile Cast Camshaft Market Size Forecast by Type
10.6.1 Alloy Cast Iron Camshafts
10.6.2 Ductile Iron Camshafts
10.6.3 Other
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Automobile Cast Camshaft Market Size Forecast by Applications
10.10.1 OEM
10.10.2 Aftermarket
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Automobile Cast Camshaft Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Automobile Cast Camshaft Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Automobile Cast Camshaft Market Size Forecast by Type
11.6.1 Alloy Cast Iron Camshafts
11.6.2 Ductile Iron Camshafts
11.6.3 Other
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Automobile Cast Camshaft Market Size Forecast by Applications
11.10.1 OEM
11.10.2 Aftermarket
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Automobile Cast Camshaft Analysis and Forecast
12.1 Introduction
12.2 Latin America Automobile Cast Camshaft Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Automobile Cast Camshaft Market Size Forecast by Type
12.6.1 Alloy Cast Iron Camshafts
12.6.2 Ductile Iron Camshafts
12.6.3 Other
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Automobile Cast Camshaft Market Size Forecast by Applications
12.10.1 OEM
12.10.2 Aftermarket
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Automobile Cast Camshaft Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Automobile Cast Camshaft Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Automobile Cast Camshaft Market Size Forecast by Type
13.6.1 Alloy Cast Iron Camshafts
13.6.2 Ductile Iron Camshafts
13.6.3 Other
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Automobile Cast Camshaft Market Size Forecast by Applications
13.10.1 OEM
13.10.2 Aftermarket
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Automobile Cast Camshaft Market: Competitive Dashboard
14.2 Global Automobile Cast Camshaft Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 COMP Performance Group
14.3.2 Camcraft Cams
14.3.3 Newman Cams
14.3.4 Bharat Forge
14.3.5 Estas Camshaft
14.3.6 Precision Camshafts
14.3.7 ThyssenKrupp
14.3.8 CWC
14.3.9 Musashi
14.3.10 MAHLE GmbH
14.3.11 PCL India
14.3.12 Kautex
14.3.13 JD Norman Industries
14.3.14 Schrick Camshaft