Market Overview:
The global automotive differential market is estimated to be valued at USD XX million in 2018 and is projected to reach USD XX million by 2030, at a CAGR of XX% during the forecast period. The growth of the market can be attributed to the increasing demand for all-wheel drive (AWD) and two-wheel drive (2WD) passenger cars and commercial vehicles. Asia Pacific is expected to lead the global automotive differential market during the forecast period, followed by Europe.
Product Definition:
An automotive differential is a gearbox located between the engine and the drive wheels of a vehicle, that splits power evenly between the two wheels. It allows each wheel to rotate at different speeds, which is necessary when turning. The differential also compensates for differences in tire size and axle weight.
All-wheel Drive:
All-wheel drive (AWD) is a system that simultaneously provides all the power to both the front and rear wheels of a vehicle. It is used in passenger cars, 2/3 wheelers, 4/5 wheelers and commercial vehicles for better traction. AWD systems are more efficient than Front Wheel Drive (FWD) or Rear Wheel Drive (RWD).
Two-wheel Drive:
Differential is a device that helps to distribute torque among the different parts of vehicle. Two-wheel drive (2WD) can be defined as a system in which there are two driven wheels located either side of the drivetrain. The 2WD systems generally have higher traction than single wheel drive (SD), but less than full four-wheel drive (4WD).
Differential Market Size, Share & Trends Analysis Report By Type, By Application, Regional Outlook, Competitive Strategies.
Application Insights:
The passenger car segment held the largest share of over 70.0% in 2017. The application of differentials in commercial vehicles is more for off-road applications as they are designed for extreme conditions such as mud, sand and snow. Differential gearboxes are used to improve the traction between the vehicle¢â‚¬â„¢s wheels which enables high-performance driving on all types of roads and paths including gravel, grass and snow covered roads or paths.
Regional Analysis:
Asia Pacific is expected to be the fastest-growing market, registering a CAGR of XX% from 2018 to 2030. The region has been witnessing strong economic growth and increasing automobile production since last few years. China, Japan, India and South Korea are the key countries contributing toward regional growth owing to their large automotive markets and manufacturing bases.
The growing popularity of electric vehicles in Europe is projected to drive the market for automotive differentials in that region over the forecast period as well. North America accounted for more than 25% share of global revenue in 2017 on account of high demand from all major application segments including passenger cars, commercial vehicles and off-roaders/UTVs (Unified Total Vehicle). Uptake of advanced technologies such as all-wheel drive systems will further boost regional product demand during the forecast period.
In addition, presence or expansion projects by various automakers such as General Motors Co.
Growth Factors:
- Increasing demand for luxury and performance cars
- Growing automotive sector in developing countries
- Rising demand for all-wheel drive (AWD) vehicles
- Proliferation of electric and hybrid vehicles
- Advances in technology that improve the performance of differentials
Scope Of The Report
Report Attributes
Report Details
Report Title
Automotive Differential Market Research Report
By Type
All-wheel Drive, Two-wheel Drive
By Application
Passenger Car, Commercial Vehicle
By Companies
GKN, JTEKT, Eaton, BorgWarner, Magna, DANA, AAM, KAAZ, CUSCO, Quaife, GKN
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
224
Number of Tables & Figures
157
Customization Available
Yes, the report can be customized as per your need.
Global Automotive Differential Market Report Segments:
The global Automotive Differential market is segmented on the basis of:
Types
All-wheel Drive, Two-wheel Drive
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Passenger Car, Commercial Vehicle
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- GKN
- JTEKT
- Eaton
- BorgWarner
- Magna
- DANA
- AAM
- KAAZ
- CUSCO
- Quaife
- GKN
Highlights of The Automotive Differential Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- All-wheel Drive
- Two-wheel Drive
- By Application:
- Passenger Car
- Commercial Vehicle
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Automotive Differential Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
An automotive differential is a type of gearbox that allows two or more wheels to rotate at different speeds. This allows the vehicle to move in a straight line while turning, and it also helps the vehicle maintain its balance.
Some of the key players operating in the automotive differential market are GKN, JTEKT, Eaton, BorgWarner, Magna, DANA, AAM, KAAZ, CUSCO, Quaife, GKN.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Automotive Differential Market Overview 4.1 Introduction 4.1.1 Market Taxonomy 4.1.2 Market Definition 4.1.3 Macro-Economic Factors Impacting the Market Growth 4.2 Automotive Differential Market Dynamics 4.2.1 Market Drivers 4.2.2 Market Restraints 4.2.3 Market Opportunity 4.3 Automotive Differential Market - Supply Chain Analysis 4.3.1 List of Key Suppliers 4.3.2 List of Key Distributors 4.3.3 List of Key Consumers 4.4 Key Forces Shaping the Automotive Differential Market 4.4.1 Bargaining Power of Suppliers 4.4.2 Bargaining Power of Buyers 4.4.3 Threat of Substitution 4.4.4 Threat of New Entrants 4.4.5 Competitive Rivalry 4.5 Global Automotive Differential Market Size & Forecast, 2018-2028 4.5.1 Automotive Differential Market Size and Y-o-Y Growth 4.5.2 Automotive Differential Market Absolute $ Opportunity
Chapter 5 Global Automotive Differential Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Automotive Differential Market Size Forecast by Type
5.2.1 All-wheel Drive
5.2.2 Two-wheel Drive
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Automotive Differential Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Automotive Differential Market Size Forecast by Applications
6.2.1 Passenger Car
6.2.2 Commercial Vehicle
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Automotive Differential Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Automotive Differential Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Automotive Differential Analysis and Forecast
9.1 Introduction
9.2 North America Automotive Differential Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Automotive Differential Market Size Forecast by Type
9.6.1 All-wheel Drive
9.6.2 Two-wheel Drive
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Automotive Differential Market Size Forecast by Applications
9.10.1 Passenger Car
9.10.2 Commercial Vehicle
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Automotive Differential Analysis and Forecast
10.1 Introduction
10.2 Europe Automotive Differential Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Automotive Differential Market Size Forecast by Type
10.6.1 All-wheel Drive
10.6.2 Two-wheel Drive
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Automotive Differential Market Size Forecast by Applications
10.10.1 Passenger Car
10.10.2 Commercial Vehicle
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Automotive Differential Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Automotive Differential Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Automotive Differential Market Size Forecast by Type
11.6.1 All-wheel Drive
11.6.2 Two-wheel Drive
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Automotive Differential Market Size Forecast by Applications
11.10.1 Passenger Car
11.10.2 Commercial Vehicle
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Automotive Differential Analysis and Forecast
12.1 Introduction
12.2 Latin America Automotive Differential Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Automotive Differential Market Size Forecast by Type
12.6.1 All-wheel Drive
12.6.2 Two-wheel Drive
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Automotive Differential Market Size Forecast by Applications
12.10.1 Passenger Car
12.10.2 Commercial Vehicle
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Automotive Differential Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Automotive Differential Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Automotive Differential Market Size Forecast by Type
13.6.1 All-wheel Drive
13.6.2 Two-wheel Drive
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Automotive Differential Market Size Forecast by Applications
13.10.1 Passenger Car
13.10.2 Commercial Vehicle
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Automotive Differential Market: Competitive Dashboard
14.2 Global Automotive Differential Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 GKN
14.3.2 JTEKT
14.3.3 Eaton
14.3.4 BorgWarner
14.3.5 Magna
14.3.6 DANA
14.3.7 AAM
14.3.8 KAAZ
14.3.9 CUSCO
14.3.10 Quaife
14.3.11 GKN