Market Overview:
The global automotive dual variable valve timing market is estimated to be valued at US$ XX Mn in 2018 and is projected to reach US$ XX Mn by 2030, exhibiting a CAGR of X.X% during the forecast period. The market growth can be attributed to the increasing demand for fuel-efficient vehicles and rising awareness about vehicle emissions. On the basis of type, the global automotive dual variable valve timing market has been segmented into late intake valve closing, early intake valve closing, early intake valve opening, and others. The late intake valve closing segment is expected to account for a major share of the global automotive dual variable valve timing market in 2018. This can be attributed to its ability improve fuel economy and reduce emissions in gasoline engines.
Product Definition:
Dual Variable Valve Timing is an automotive engineering technology that allows the timing of the intake and exhaust valve openings to be independently controlled. This allows for a greater range of engine performance, fuel economy, and emissions control possibilities.
Late Intake Valve Closing:
Late intake valve closing is a method to increase the volumetric efficiency of engines by reducing the time spent at high speeds, where air is admitted in combustion chambers. The process involves delaying the act of closing of an intake valve until after all four cylinders are firing and maximum pressure has been reached across all eight valves. This allows for more air and fuel to be admitted into each cylinder at once, resulting in higher power output with less strain on engine components as well as reduced emissions from vehicles.
Early Intake Valve Closing:
The early intake valve closing is a technique used to improve the volumetric efficiency of engines. The method involves shortening the duration of time that valves are open, which allows more air and fuel into the engine at one go, leading to higher power output and better acceleration.
In automotive dual variable valve timing (DVVT) engines, there are two sets of intake valves; one set is operated by a camshaft mounted on crankshaft.
Application Insights:
Passenger vehicle application segment accounted for the largest share of over 60.0% in 2017 and is expected to continue its dominance over the forecast period. This can be attributed to increasing demand for passenger vehicles with improved fuel economy and emission control, which are majorly driven by government regulations regarding vehicular emissions across various regions worldwide.
The commercial vehicle application segment is projected to witness significant growth during the forecast period owing to rising demand from countries, including India, China and Brazil for heavy-duty vehicles with higher carrying capacity. Increasing need for trucks that can carry goods in less time while maintaining a safe schedule will drive adoption of dual variable valve timing systems in commercial vehicles extensively across emerging economies such as India and China on account of growing manufacturing bases thereover recent years has led many companies globally into researching & developing DVT solutions specifically designed especially for these applications thus contributing significantly towards global market share estimated above 60%.
Regional Analysis:
Asia Pacific is expected to be the fastest-growing market, registering a CAGR of XX% from 2018 to 2030. The region has been witnessing increasing demand for passenger cars and commercial vehicles with improved fuel efficiency and reduced weight as well as enhanced performance. This trend is projected to continue over the forecast period, thereby supporting the growth of AVDSVT in this region.
The growing adoption of electric vehicles across countries such as China and India on account of rising awareness regarding their benefits coupled with government subsidies aimed at reducing carbon emissions from vehicular sources are some major factors driving regional product demand.
Growth Factors:
- Increasing demand for fuel-efficient and low-emission vehicles
- Rising disposable income of consumers in developing countries
- Stringent emission norms by regulatory authorities worldwide
- Technological advancements in valve timing systems and components
- Growing popularity of dual variable valve timing systems among automakers
Scope Of The Report
Report Attributes
Report Details
Report Title
Automotive Dual Variable Valve Timing Market Research Report
By Type
Late Intake Valve Closing, Early Intake Valve Closing, Early Intake Valve Opening, Others
By Application
Passenger Vehicle, Commercial Vehicle
By Companies
Delphi, DENSO, AISIN SEIKI, Eaton, Hitachi Automotive Systems, Perodua, Metaldyne, HUSCO International, Delphi
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
200
Number of Tables & Figures
140
Customization Available
Yes, the report can be customized as per your need.
Global Automotive Dual Variable Valve Timing Market Report Segments:
The global Automotive Dual Variable Valve Timing market is segmented on the basis of:
Types
Late Intake Valve Closing, Early Intake Valve Closing, Early Intake Valve Opening, Others
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Passenger Vehicle, Commercial Vehicle
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Delphi
- DENSO
- AISIN SEIKI
- Eaton
- Hitachi Automotive Systems
- Perodua
- Metaldyne
- HUSCO International
- Delphi
Highlights of The Automotive Dual Variable Valve Timing Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Late Intake Valve Closing
- Early Intake Valve Closing
- Early Intake Valve Opening
- Others
- By Application:
- Passenger Vehicle
- Commercial Vehicle
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Automotive Dual Variable Valve Timing Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Automotive Dual Variable Valve Timing (ADVVT) is a system that uses two valves per cylinder to control the timing of fuel injection. ADVVT systems allow for more precise control over engine performance and fuel economy.
Some of the major companies in the automotive dual variable valve timing market are Delphi, DENSO, AISIN SEIKI, Eaton, Hitachi Automotive Systems, Perodua, Metaldyne, HUSCO International, Delphi.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Automotive Dual Variable Valve Timing Market Overview 4.1 Introduction 4.1.1 Market Taxonomy 4.1.2 Market Definition 4.1.3 Macro-Economic Factors Impacting the Market Growth 4.2 Automotive Dual Variable Valve Timing Market Dynamics 4.2.1 Market Drivers 4.2.2 Market Restraints 4.2.3 Market Opportunity 4.3 Automotive Dual Variable Valve Timing Market - Supply Chain Analysis 4.3.1 List of Key Suppliers 4.3.2 List of Key Distributors 4.3.3 List of Key Consumers 4.4 Key Forces Shaping the Automotive Dual Variable Valve Timing Market 4.4.1 Bargaining Power of Suppliers 4.4.2 Bargaining Power of Buyers 4.4.3 Threat of Substitution 4.4.4 Threat of New Entrants 4.4.5 Competitive Rivalry 4.5 Global Automotive Dual Variable Valve Timing Market Size & Forecast, 2018-2028 4.5.1 Automotive Dual Variable Valve Timing Market Size and Y-o-Y Growth 4.5.2 Automotive Dual Variable Valve Timing Market Absolute $ Opportunity
Chapter 5 Global Automotive Dual Variable Valve Timing Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Automotive Dual Variable Valve Timing Market Size Forecast by Type
5.2.1 Late Intake Valve Closing
5.2.2 Early Intake Valve Closing
5.2.3 Early Intake Valve Opening
5.2.4 Others
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Automotive Dual Variable Valve Timing Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Automotive Dual Variable Valve Timing Market Size Forecast by Applications
6.2.1 Passenger Vehicle
6.2.2 Commercial Vehicle
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Automotive Dual Variable Valve Timing Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Automotive Dual Variable Valve Timing Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Automotive Dual Variable Valve Timing Analysis and Forecast
9.1 Introduction
9.2 North America Automotive Dual Variable Valve Timing Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Automotive Dual Variable Valve Timing Market Size Forecast by Type
9.6.1 Late Intake Valve Closing
9.6.2 Early Intake Valve Closing
9.6.3 Early Intake Valve Opening
9.6.4 Others
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Automotive Dual Variable Valve Timing Market Size Forecast by Applications
9.10.1 Passenger Vehicle
9.10.2 Commercial Vehicle
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Automotive Dual Variable Valve Timing Analysis and Forecast
10.1 Introduction
10.2 Europe Automotive Dual Variable Valve Timing Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Automotive Dual Variable Valve Timing Market Size Forecast by Type
10.6.1 Late Intake Valve Closing
10.6.2 Early Intake Valve Closing
10.6.3 Early Intake Valve Opening
10.6.4 Others
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Automotive Dual Variable Valve Timing Market Size Forecast by Applications
10.10.1 Passenger Vehicle
10.10.2 Commercial Vehicle
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Automotive Dual Variable Valve Timing Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Automotive Dual Variable Valve Timing Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Automotive Dual Variable Valve Timing Market Size Forecast by Type
11.6.1 Late Intake Valve Closing
11.6.2 Early Intake Valve Closing
11.6.3 Early Intake Valve Opening
11.6.4 Others
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Automotive Dual Variable Valve Timing Market Size Forecast by Applications
11.10.1 Passenger Vehicle
11.10.2 Commercial Vehicle
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Automotive Dual Variable Valve Timing Analysis and Forecast
12.1 Introduction
12.2 Latin America Automotive Dual Variable Valve Timing Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Automotive Dual Variable Valve Timing Market Size Forecast by Type
12.6.1 Late Intake Valve Closing
12.6.2 Early Intake Valve Closing
12.6.3 Early Intake Valve Opening
12.6.4 Others
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Automotive Dual Variable Valve Timing Market Size Forecast by Applications
12.10.1 Passenger Vehicle
12.10.2 Commercial Vehicle
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Automotive Dual Variable Valve Timing Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Automotive Dual Variable Valve Timing Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Automotive Dual Variable Valve Timing Market Size Forecast by Type
13.6.1 Late Intake Valve Closing
13.6.2 Early Intake Valve Closing
13.6.3 Early Intake Valve Opening
13.6.4 Others
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Automotive Dual Variable Valve Timing Market Size Forecast by Applications
13.10.1 Passenger Vehicle
13.10.2 Commercial Vehicle
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Automotive Dual Variable Valve Timing Market: Competitive Dashboard
14.2 Global Automotive Dual Variable Valve Timing Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Delphi
14.3.2 DENSO
14.3.3 AISIN SEIKI
14.3.4 Eaton
14.3.5 Hitachi Automotive Systems
14.3.6 Perodua
14.3.7 Metaldyne
14.3.8 HUSCO International
14.3.9 Delphi