Market Overview:
The global automotive Ethernet PHYs market is expected to grow at a CAGR of 10.5% during the forecast period from 2018 to 2030. The growth of the market can be attributed to the increasing demand for advanced safety features and connectivity in vehicles. Additionally, the growing trend of electrification and automation in vehicles is also contributing to the growth of this market. The global automotive Ethernet PHYs market can be segmented on the basis of type, application, and region. On the basis of type, it can be divided into single port and dual port PHYs. By application, it can be classified into ADAS and highly automated driving, connectivity, vehicle networking, functional safety and automotive security, gateway applications among others. Region-wise, it can be segregated into North America,, Latin America,, Europe,, Asia Pacific ,and Middle East & Africa .
Product Definition:
An automotive Ethernet PHY is a physical layer device that enables the transmission of data over an Ethernet network in an automotive application. The importance of automotive Ethernet PHYs lies in their ability to provide high-speed, reliable communication for vehicles, which can help improve performance and safety.
Single Port:
Single port is a kind of Ethernet PHY that supports only one network connection. It reduces costs and increases bandwidth by limiting the number of cables needed to connect to the switch. In addition, it simplifies cabling management and helps in reducing hardware costs due to fewer ports being required on switches.
Increasing demand for high-speed data transmission in automotive applications is expected to drive single port's market growth over the forecast period.
Dual Port:
Dual port is a technology used in Ethernet PHYs to allow two interfaces to share the same physical medium. The primary function of a dual port Ethernet PHY is to provide an interface for power-over-Ethernet (PoE) or ethernet over fiber channel. It provides an additional input and output connection on the rear panel of a device, which can be used for connecting network devices and peripheral equipment such as printers, scanners, etc.
Application Insights:
ADAS and highly automated driving, connectivity, vehicle networking, functional safety and automotive security are the key application segments of the global automotive Ethernet PHYs market. ADAS segment dominated the overall market in terms of revenue share in 2017. The growth can be attributed to increasing demand for high-end autonomous vehicles from various industries such as transportation, medical care and insurance companies.
The gateway segment is expected to exhibit significant growth over the forecast period owing to its ability to connect different systems within an automobile through network architecture. Automotive networking enables data transfer between components on a car¢â‚¬â„¢s ECU (Electronic Control Unit) level which helps enhance overall system performance by enabling faster response time when commanded by a driver¢â‚¬â„¢s command input device or pedal position sensor changes.
Regional Analysis:
North America dominated the global market in terms of revenue share in 2017. The region is expected to continue its dominance over the forecast period owing to increasing demand for high-performance vehicles with enhanced safety and networking capabilities. Europe accounted for a significant share of the overall industry revenue due to growing investments by major players in this region coupled with technological advancements such as V2X, HD wireless technology, and CoAP. Moreover, rising adoption of automated driving technologies is also anticipated to drive regional growth over the next eight years.
Asia Pacific is projected to be one of fastest-growing regions during the forecast period owing to rapid developments taking place across various industries including automotive electronics & systems.
Growth Factors:
- Increasing demand for Ethernet-based vehicles
- Proliferation of connected and autonomous cars
- Rising demand for high-speed data transmission in automobiles
- Growing popularity of vehicle-to-vehicle (V2V) and vehicle-to-infrastructure (V2I) communication systems
- Advances in automotive Ethernet PHY technology
Scope Of The Report
Report Attributes
Report Details
Report Title
Automotive Ethernet PHYs Market Research Report
By Type
Single Port, Dual Port
By Application
ADAS and Highly Automated Driving, Connectivity, Vehicle Networking, Functional Safety and Automotive Security, Gateway
By Companies
Texas Instruments, Microchip Technology, Marvell Technology, Microsemi, Broadcom, Intel, Maxim Integrated, NXP, Renesas Electronics, Analog Devices, Canova Tech, Realtek, Broadcom, Infineon
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
169
Number of Tables & Figures
119
Customization Available
Yes, the report can be customized as per your need.
Global Automotive Ethernet PHYs Market Report Segments:
The global Automotive Ethernet PHYs market is segmented on the basis of:
Types
Single Port, Dual Port
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
ADAS and Highly Automated Driving, Connectivity, Vehicle Networking, Functional Safety and Automotive Security, Gateway
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Texas Instruments
- Microchip Technology
- Marvell Technology
- Microsemi
- Broadcom
- Intel
- Maxim Integrated
- NXP
- Renesas Electronics
- Analog Devices
- Canova Tech
- Realtek
- Broadcom
- Infineon
Highlights of The Automotive Ethernet PHYs Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Single Port
- Dual Port
- By Application:
- ADAS and Highly Automated Driving
- Connectivity
- Vehicle Networking
- Functional Safety and Automotive Security
- Gateway
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Automotive Ethernet PHYs Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Automotive Ethernet PHYs are a type of network interface card (NIC) that provide high-speed wired connectivity for automotive applications. They allow drivers to access the Internet, streaming audio and video, and other vehicle-related services. Automotive Ethernet PHYs typically use a different set of standards than regular home or office networks, so they require special installation instructions and may not work with standard routers or switches.
Some of the key players operating in the automotive ethernet phys market are Texas Instruments, Microchip Technology, Marvell Technology, Microsemi, Broadcom, Intel, Maxim Integrated, NXP, Renesas Electronics, Analog Devices, Canova Tech, Realtek, Broadcom, Infineon.
The automotive ethernet phys market is expected to grow at a compound annual growth rate of 10.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Automotive Ethernet PHYs Market Overview 4.1 Introduction 4.1.1 Market Taxonomy 4.1.2 Market Definition 4.1.3 Macro-Economic Factors Impacting the Market Growth 4.2 Automotive Ethernet PHYs Market Dynamics 4.2.1 Market Drivers 4.2.2 Market Restraints 4.2.3 Market Opportunity 4.3 Automotive Ethernet PHYs Market - Supply Chain Analysis 4.3.1 List of Key Suppliers 4.3.2 List of Key Distributors 4.3.3 List of Key Consumers 4.4 Key Forces Shaping the Automotive Ethernet PHYs Market 4.4.1 Bargaining Power of Suppliers 4.4.2 Bargaining Power of Buyers 4.4.3 Threat of Substitution 4.4.4 Threat of New Entrants 4.4.5 Competitive Rivalry 4.5 Global Automotive Ethernet PHYs Market Size & Forecast, 2018-2028 4.5.1 Automotive Ethernet PHYs Market Size and Y-o-Y Growth 4.5.2 Automotive Ethernet PHYs Market Absolute $ Opportunity
Chapter 5 Global Automotive Ethernet PHYs Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Automotive Ethernet PHYs Market Size Forecast by Type
5.2.1 Single Port
5.2.2 Dual Port
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Automotive Ethernet PHYs Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Automotive Ethernet PHYs Market Size Forecast by Applications
6.2.1 ADAS and Highly Automated Driving
6.2.2 Connectivity
6.2.3 Vehicle Networking
6.2.4 Functional Safety and Automotive Security
6.2.5 Gateway
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Automotive Ethernet PHYs Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Automotive Ethernet PHYs Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Automotive Ethernet PHYs Analysis and Forecast
9.1 Introduction
9.2 North America Automotive Ethernet PHYs Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Automotive Ethernet PHYs Market Size Forecast by Type
9.6.1 Single Port
9.6.2 Dual Port
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Automotive Ethernet PHYs Market Size Forecast by Applications
9.10.1 ADAS and Highly Automated Driving
9.10.2 Connectivity
9.10.3 Vehicle Networking
9.10.4 Functional Safety and Automotive Security
9.10.5 Gateway
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Automotive Ethernet PHYs Analysis and Forecast
10.1 Introduction
10.2 Europe Automotive Ethernet PHYs Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Automotive Ethernet PHYs Market Size Forecast by Type
10.6.1 Single Port
10.6.2 Dual Port
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Automotive Ethernet PHYs Market Size Forecast by Applications
10.10.1 ADAS and Highly Automated Driving
10.10.2 Connectivity
10.10.3 Vehicle Networking
10.10.4 Functional Safety and Automotive Security
10.10.5 Gateway
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Automotive Ethernet PHYs Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Automotive Ethernet PHYs Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Automotive Ethernet PHYs Market Size Forecast by Type
11.6.1 Single Port
11.6.2 Dual Port
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Automotive Ethernet PHYs Market Size Forecast by Applications
11.10.1 ADAS and Highly Automated Driving
11.10.2 Connectivity
11.10.3 Vehicle Networking
11.10.4 Functional Safety and Automotive Security
11.10.5 Gateway
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Automotive Ethernet PHYs Analysis and Forecast
12.1 Introduction
12.2 Latin America Automotive Ethernet PHYs Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Automotive Ethernet PHYs Market Size Forecast by Type
12.6.1 Single Port
12.6.2 Dual Port
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Automotive Ethernet PHYs Market Size Forecast by Applications
12.10.1 ADAS and Highly Automated Driving
12.10.2 Connectivity
12.10.3 Vehicle Networking
12.10.4 Functional Safety and Automotive Security
12.10.5 Gateway
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Automotive Ethernet PHYs Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Automotive Ethernet PHYs Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Automotive Ethernet PHYs Market Size Forecast by Type
13.6.1 Single Port
13.6.2 Dual Port
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Automotive Ethernet PHYs Market Size Forecast by Applications
13.10.1 ADAS and Highly Automated Driving
13.10.2 Connectivity
13.10.3 Vehicle Networking
13.10.4 Functional Safety and Automotive Security
13.10.5 Gateway
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Automotive Ethernet PHYs Market: Competitive Dashboard
14.2 Global Automotive Ethernet PHYs Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Texas Instruments
14.3.2 Microchip Technology
14.3.3 Marvell Technology
14.3.4 Microsemi
14.3.5 Broadcom
14.3.6 Intel
14.3.7 Maxim Integrated
14.3.8 NXP
14.3.9 Renesas Electronics
14.3.10 Analog Devices
14.3.11 Canova Tech
14.3.12 Realtek
14.3.13 Broadcom
14.3.14 Infineon