Market Overview:
The global automotive fuel handling and evapo system parts market is estimated to be valued at US$ XX Mn in 2018 and is projected to reach US$ XX Mn by 2030, exhibiting a CAGR of X.X%. The market growth can be attributed to the increasing demand for passenger cars and commercial vehicles across the globe. The global automotive fuel handling and evapo system parts market is segmented on the basis of type, application, and region. On the basis of type, the market is segmented into EVAP canister, vent control valve (VCV), purge valve/sensor, liquid-vapor separator (LVS), among others. The EVAP canister segment dominates the global automotive fuel handling and evapo system parts market owing to its high adoption in passenger cars. On the basis of application, the market is divided into passenger cars and commercial vehicles segments. Passenger car dominates this category owing to rising demand for personal transportation globally.
Product Definition:
Parts that are used in automotive fuel handling and evaporative emissions systems. These parts help to keep the fuel system clean and functioning properly, as well as keeping emissions levels low.
EVAP Canister:
The Evaporation Canister or EVAP (Evaporative Air Absorption System) is a device that is used in the automotive industry to aid fuel evaporation. It works by drawing air into a closed system, which aids in the rapid removal of water and other liquid deposits from the surface of fuels. The canister usually consists of an open-ended tube made up of plastic or metal, through which air flows before being introduced into the carburetor/carb.
Vent Control Valve:
The vent control valve is a device that opens and closes to allow or prevent fuel from flowing back into the tank. It is installed in the filler pipe of vehicles, which allows air to enter when the vehicle is stationary and prevents gasoline from entering when the engine is running. The function of this valve can be achieved by using two valves; one for each direction.
Application Insights:
Passenger cars application segment accounted for the largest share of over 60.0% in 2017. The demand is expected to be high due to rising sales of passenger vehicles, especially in developing countries such as India and China. Moreover, increasing penetration of fuel cell vehicles is expected to drive the demand for evapo system parts over the forecast period owing to their ability to operate on pure hydrogen gas without requiring any kind of gasoline or diesel engine conversion.
Commercial Vehicles application segment is projected register a CAGR exceeding 7% from 2018 to 2030 owingto an increase in commercial vehicle production across emerging nations including Brazil, South Africa and Indonesia coupled with stringent regulations regarding environmental protection implemented by these governments across various sectors including automotive industry.
Regional Analysis:
Asia Pacific is expected to be the fastest-growing region over the forecast period. The growth can be attributed to increasing automotive production in countries, such as India, China, and Japan. Furthermore, rising disposable income coupled with a growing population will drive demand for passenger cars and commercial vehicles in this region. Europe accounted for more than 30% of market share owing to stringent government regulations regarding carbon dioxide emissions from automobiles. In addition, presence of key automobile manufacturers including Volkswagen AG; BMW Group; Daimler AG; Ford Motor Company Limited; Fiat Chrysler Automobiles N.V.; PSA Peugeot Citroen S.A.; Renault S.E.
Growth Factors:
- Increasing demand for fuel-efficient and low-emission vehicles
- Stringent emission norms by regulatory authorities across the globe
- Proliferation of electric and hybrid vehicles
- Growing demand for automotive parts and components from emerging economies such as China and India
- Technological advancements in evaporative emissions control systems
Scope Of The Report
Report Attributes
Report Details
Report Title
Automotive Fuel Handling and Evapo System Parts Market Research Report
By Type
EVAP Canister, Vent Control Valve, Purge Valve/Sensor, Liquid-Vapor Separator, Other Parts
By Application
Passenger Cars, Commercial Vehicles
By Companies
Bosch (Germany), Johnson Matthey (UK), Hitachi Automotive Systems (Japan), Plastic Omnium (France), NOK (Japan), MANN+HUMMEL (Germany), CIE Automotive (Spain), Futaba Industrial (Japan), Trelleborg (Sweden), Modine Manufacturing (USA), Bosch (Germany), Aisan Industry (Japan), Usui Kokusai Sangyo Kaisha (Japan), Mikuni (Japan), PIOLAX (Japan), Inzi Controls (Korea), Alfmeier Praezision (Germany), Inergy Automotive Systems (France)
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
201
Number of Tables & Figures
141
Customization Available
Yes, the report can be customized as per your need.
Global Automotive Fuel Handling and Evapo System Parts Market Report Segments:
The global Automotive Fuel Handling and Evapo System Parts market is segmented on the basis of:
Types
EVAP Canister, Vent Control Valve, Purge Valve/Sensor, Liquid-Vapor Separator, Other Parts
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Passenger Cars, Commercial Vehicles
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Bosch (Germany)
- Johnson Matthey (UK)
- Hitachi Automotive Systems (Japan)
- Plastic Omnium (France)
- NOK (Japan)
- MANN+HUMMEL (Germany)
- CIE Automotive (Spain)
- Futaba Industrial (Japan)
- Trelleborg (Sweden)
- Modine Manufacturing (USA)
- Bosch (Germany)
- Aisan Industry (Japan)
- Usui Kokusai Sangyo Kaisha (Japan)
- Mikuni (Japan)
- PIOLAX (Japan)
- Inzi Controls (Korea)
- Alfmeier Praezision (Germany)
- Inergy Automotive Systems (France)
Highlights of The Automotive Fuel Handling and Evapo System Parts Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- EVAP Canister
- Vent Control Valve
- Purge Valve/Sensor
- Liquid-Vapor Separator
- Other Parts
- By Application:
- Passenger Cars
- Commercial Vehicles
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Automotive Fuel Handling and Evapo System Parts Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Automotive fuel handling and evapo system parts are components that help to manage the flow of gasoline and diesel fuel from the tank to the engine. These parts include pumps, filters, valves, hoses, and other equipment.
Some of the key players operating in the automotive fuel handling and evapo system parts market are Bosch (Germany), Johnson Matthey (UK), Hitachi Automotive Systems (Japan), Plastic Omnium (France), NOK (Japan), MANN+HUMMEL (Germany), CIE Automotive (Spain), Futaba Industrial (Japan), Trelleborg (Sweden), Modine Manufacturing (USA), Bosch (Germany), Aisan Industry (Japan), Usui Kokusai Sangyo Kaisha (Japan), Mikuni (Japan), PIOLAX (Japan), Inzi Controls (Korea), Alfmeier Praezision (Germany), Inergy Automotive Systems (France).
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Automotive Fuel Handling and Evapo System Parts Market Overview
4.1 Introduction
4.1.1 Market Taxonomy
4.1.2 Market Definition
4.1.3 Macro-Economic Factors Impacting the Market Growth
4.2 Automotive Fuel Handling and Evapo System Parts Market Dynamics
4.2.1 Market Drivers
4.2.2 Market Restraints
4.2.3 Market Opportunity
4.3 Automotive Fuel Handling and Evapo System Parts Market - Supply Chain Analysis
4.3.1 List of Key Suppliers
4.3.2 List of Key Distributors
4.3.3 List of Key Consumers
4.4 Key Forces Shaping the Automotive Fuel Handling and Evapo System Parts Market
4.4.1 Bargaining Power of Suppliers
4.4.2 Bargaining Power of Buyers
4.4.3 Threat of Substitution
4.4.4 Threat of New Entrants
4.4.5 Competitive Rivalry
4.5 Global Automotive Fuel Handling and Evapo System Parts Market Size & Forecast, 2018-2028
4.5.1 Automotive Fuel Handling and Evapo System Parts Market Size and Y-o-Y Growth
4.5.2 Automotive Fuel Handling and Evapo System Parts Market Absolute $ Opportunity
Chapter 5 Global Automotive Fuel Handling and Evapo System Parts Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Automotive Fuel Handling and Evapo System Parts Market Size Forecast by Type
5.2.1 EVAP Canister
5.2.2 Vent Control Valve
5.2.3 Purge Valve/Sensor
5.2.4 Liquid-Vapor Separator
5.2.5 Other Parts
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Automotive Fuel Handling and Evapo System Parts Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Automotive Fuel Handling and Evapo System Parts Market Size Forecast by Applications
6.2.1 Passenger Cars
6.2.2 Commercial Vehicles
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Automotive Fuel Handling and Evapo System Parts Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Automotive Fuel Handling and Evapo System Parts Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Automotive Fuel Handling and Evapo System Parts Analysis and Forecast
9.1 Introduction
9.2 North America Automotive Fuel Handling and Evapo System Parts Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Automotive Fuel Handling and Evapo System Parts Market Size Forecast by Type
9.6.1 EVAP Canister
9.6.2 Vent Control Valve
9.6.3 Purge Valve/Sensor
9.6.4 Liquid-Vapor Separator
9.6.5 Other Parts
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Automotive Fuel Handling and Evapo System Parts Market Size Forecast by Applications
9.10.1 Passenger Cars
9.10.2 Commercial Vehicles
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Automotive Fuel Handling and Evapo System Parts Analysis and Forecast
10.1 Introduction
10.2 Europe Automotive Fuel Handling and Evapo System Parts Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Automotive Fuel Handling and Evapo System Parts Market Size Forecast by Type
10.6.1 EVAP Canister
10.6.2 Vent Control Valve
10.6.3 Purge Valve/Sensor
10.6.4 Liquid-Vapor Separator
10.6.5 Other Parts
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Automotive Fuel Handling and Evapo System Parts Market Size Forecast by Applications
10.10.1 Passenger Cars
10.10.2 Commercial Vehicles
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Automotive Fuel Handling and Evapo System Parts Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Automotive Fuel Handling and Evapo System Parts Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Automotive Fuel Handling and Evapo System Parts Market Size Forecast by Type
11.6.1 EVAP Canister
11.6.2 Vent Control Valve
11.6.3 Purge Valve/Sensor
11.6.4 Liquid-Vapor Separator
11.6.5 Other Parts
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Automotive Fuel Handling and Evapo System Parts Market Size Forecast by Applications
11.10.1 Passenger Cars
11.10.2 Commercial Vehicles
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Automotive Fuel Handling and Evapo System Parts Analysis and Forecast
12.1 Introduction
12.2 Latin America Automotive Fuel Handling and Evapo System Parts Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Automotive Fuel Handling and Evapo System Parts Market Size Forecast by Type
12.6.1 EVAP Canister
12.6.2 Vent Control Valve
12.6.3 Purge Valve/Sensor
12.6.4 Liquid-Vapor Separator
12.6.5 Other Parts
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Automotive Fuel Handling and Evapo System Parts Market Size Forecast by Applications
12.10.1 Passenger Cars
12.10.2 Commercial Vehicles
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Automotive Fuel Handling and Evapo System Parts Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Automotive Fuel Handling and Evapo System Parts Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Automotive Fuel Handling and Evapo System Parts Market Size Forecast by Type
13.6.1 EVAP Canister
13.6.2 Vent Control Valve
13.6.3 Purge Valve/Sensor
13.6.4 Liquid-Vapor Separator
13.6.5 Other Parts
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Automotive Fuel Handling and Evapo System Parts Market Size Forecast by Applications
13.10.1 Passenger Cars
13.10.2 Commercial Vehicles
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Automotive Fuel Handling and Evapo System Parts Market: Competitive Dashboard
14.2 Global Automotive Fuel Handling and Evapo System Parts Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Bosch (Germany)
14.3.2 Johnson Matthey (UK)
14.3.3 Hitachi Automotive Systems (Japan)
14.3.4 Plastic Omnium (France)
14.3.5 NOK (Japan)
14.3.6 MANN+HUMMEL (Germany)
14.3.7 CIE Automotive (Spain)
14.3.8 Futaba Industrial (Japan)
14.3.9 Trelleborg (Sweden)
14.3.10 Modine Manufacturing (USA)
14.3.11 Bosch (Germany)
14.3.12 Aisan Industry (Japan)
14.3.13 Usui Kokusai Sangyo Kaisha (Japan)
14.3.14 Mikuni (Japan)
14.3.15 PIOLAX (Japan)
14.3.16 Inzi Controls (Korea)
14.3.17 Alfmeier Praezision (Germany)
14.3.18 Inergy Automotive Systems (France)
