Market Overview:
The global automotive single disc clutch market is expected to grow at a CAGR of 5.5% during the forecast period from 2018 to 2030. The market growth can be attributed to the increasing demand for passenger vehicles and commercial vehicles across the globe. In terms of type, the below 200 mm segment is expected to dominate the global automotive single disc clutch market during the forecast period, owing to its low cost and easy installation. However, with technological advancements in this sector, there is an increasing demand for advanced single disc clutches with higher torque capacity in developed countries such as Europe and North America. In terms of application, passenger vehicles are expected to account for a larger share of the global automotive single disc clutch market during the forecast period as compared to commercial vehicles.
Product Definition:
An automotive single disc clutch is a device used to connect and disconnect power from an engine to a transmission. It allows the engine to idle without the transmission connected, which saves fuel.
Below 200 mm:
Below 200 mm, it's usage.
The automotive industry is growing at a rapid pace and with the changing trends, the clutch market is also expected to grow. The increasing demand for vehicles across developing countries such as India, China, Indonesia & Thailand are expected to boost production of automobiles which in turn will augment single disc clutch market growth over the forecast period.
200 to 300 mm:
200 to 300 mm is the range of single disc clutch that is used in automotive. It's a kind of centrifugal clutch, which has one main flywheel and several smaller ones. The number of small discs can vary from 1 to 6 or more depending upon the application requirement.
Application Insights:
The passenger vehicle segment held the largest share of over 70.0% in 2017. The demand for automotive single disc clutch is expected to increase significantly owing to its application in various types of vehicles such as light commercial vehicles, heavy-duty trucks and buses, and sports cars among others. Single disc clutches are used in several applications including city buses, heavy-duty trucks & buses, sports cars among others on account of their high performance and durability coupled with low maintenance cost which makes them highly preferable compared to multi-disc clutches.
Single disc clutches have a lower frictional resistance than multi discs thus improving the overall efficiency resulting in increased fuel consumption by approximately 3%. This factor is anticipated to reduce the sales of passenger vehicles thereby impacting industry growth negatively during forecast years. However, increasing sales of diesel fueled engines particularly across developing countries will help market growth from 2018 to 2030 positively contributing towards revenue generation during that period.
Regional Analysis:
Asia Pacific is expected to be the fastest-growing regional segment over the forecast period. The region accounted for a share of more than 60% in 2017 and is anticipated to continue its dominance over the next eight years. This growth can be attributed to increasing automobile production in China, India, Japan, and South Korea. Moreover, rising disposable income coupled with low interest rates on vehicle loans will boost automotive sales across emerging economies such as Brazil and Mexico.
Europe was valued at USD X billion in 2017 owing to technological advancements along with high demand for efficient vehicles from countries such as Germany and Russia that witness heavy traffic every day. North America also held a significant market share due to growing preference for diesel engines that offer improved performance compared to their counterparts fueled by gasoline or biofuel sources like ethanol gasifier combined cycle gas turbine (EGCGT).
Growth Factors:
- Increasing demand for fuel-efficient and low-emission vehicles
- Rising disposable income of consumers in developing countries
- Technological advancements in automotive single disc clutch systems
- Stringent government regulations on emissions and fuel economy standards
- Growing popularity of automatic transmission vehicles
Scope Of The Report
Report Attributes
Report Details
Report Title
Automotive Single Disc Clutch Market Research Report
By Type
Below 200 mm, 200 to 300 mm, 300 to 400 mm, Above 400 mm
By Application
Passenger Vehicle, Commercial Vehicle
By Companies
Schaeffler (Luk), ZF (Sachs), Valeo, F.C.C., Exedy, Borgwarner, Eaton, Aisin, CNC Driveline, Zhejiang Tieliu, Schaeffler (Luk), Hubei Tri-Ring, Chuangcun Yidong, Wuhu Hefeng, Rongcheng Huanghai, Guilin Fuda, Hangzhou Qidie
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
211
Number of Tables & Figures
148
Customization Available
Yes, the report can be customized as per your need.
Global Automotive Single Disc Clutch Market Report Segments:
The global Automotive Single Disc Clutch market is segmented on the basis of:
Types
Below 200 mm, 200 to 300 mm, 300 to 400 mm, Above 400 mm
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Passenger Vehicle, Commercial Vehicle
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Schaeffler (Luk)
- ZF (Sachs)
- Valeo
- F.C.C.
- Exedy
- Borgwarner
- Eaton
- Aisin
- CNC Driveline
- Zhejiang Tieliu
- Schaeffler (Luk)
- Hubei Tri-Ring
- Chuangcun Yidong
- Wuhu Hefeng
- Rongcheng Huanghai
- Guilin Fuda
- Hangzhou Qidie
Highlights of The Automotive Single Disc Clutch Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Below 200 mm
- 200 to 300 mm
- 300 to 400 mm
- Above 400 mm
- By Application:
- Passenger Vehicle
- Commercial Vehicle
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Automotive Single Disc Clutch Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
An automotive single disc clutch is a type of clutch that uses one disc to engage and disengage the drive shaft. This type of clutch is typically used in vehicles that have manual transmissions.
Some of the major players in the automotive single disc clutch market are Schaeffler (Luk), ZF (Sachs), Valeo, F.C.C., Exedy, Borgwarner, Eaton, Aisin, CNC Driveline, Zhejiang Tieliu, Schaeffler (Luk), Hubei Tri-Ring, Chuangcun Yidong, Wuhu Hefeng, Rongcheng Huanghai, Guilin Fuda, Hangzhou Qidie.
The automotive single disc clutch market is expected to register a CAGR of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Automotive Single Disc Clutch Market Overview 4.1 Introduction 4.1.1 Market Taxonomy 4.1.2 Market Definition 4.1.3 Macro-Economic Factors Impacting the Market Growth 4.2 Automotive Single Disc Clutch Market Dynamics 4.2.1 Market Drivers 4.2.2 Market Restraints 4.2.3 Market Opportunity 4.3 Automotive Single Disc Clutch Market - Supply Chain Analysis 4.3.1 List of Key Suppliers 4.3.2 List of Key Distributors 4.3.3 List of Key Consumers 4.4 Key Forces Shaping the Automotive Single Disc Clutch Market 4.4.1 Bargaining Power of Suppliers 4.4.2 Bargaining Power of Buyers 4.4.3 Threat of Substitution 4.4.4 Threat of New Entrants 4.4.5 Competitive Rivalry 4.5 Global Automotive Single Disc Clutch Market Size & Forecast, 2020-2028 4.5.1 Automotive Single Disc Clutch Market Size and Y-o-Y Growth 4.5.2 Automotive Single Disc Clutch Market Absolute $ Opportunity
Chapter 5 Global Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Market Size Forecast by Type
5.2.1 Below 200 mm
5.2.2 200 to 300 mm
5.2.3 300 to 400 mm
5.2.4 Above 400 mm
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Market Size Forecast by Applications
6.2.1 Passenger Vehicle
6.2.2 Commercial Vehicle
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Automotive Single Disc Clutch Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Automotive Single Disc Clutch Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Analysis and Forecast
9.1 Introduction
9.2 North America Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Market Size Forecast by Type
9.6.1 Below 200 mm
9.6.2 200 to 300 mm
9.6.3 300 to 400 mm
9.6.4 Above 400 mm
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Market Size Forecast by Applications
9.10.1 Passenger Vehicle
9.10.2 Commercial Vehicle
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Analysis and Forecast
10.1 Introduction
10.2 Europe Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Market Size Forecast by Type
10.6.1 Below 200 mm
10.6.2 200 to 300 mm
10.6.3 300 to 400 mm
10.6.4 Above 400 mm
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Market Size Forecast by Applications
10.10.1 Passenger Vehicle
10.10.2 Commercial Vehicle
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Market Size Forecast by Type
11.6.1 Below 200 mm
11.6.2 200 to 300 mm
11.6.3 300 to 400 mm
11.6.4 Above 400 mm
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Market Size Forecast by Applications
11.10.1 Passenger Vehicle
11.10.2 Commercial Vehicle
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Analysis and Forecast
12.1 Introduction
12.2 Latin America Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Market Size Forecast by Type
12.6.1 Below 200 mm
12.6.2 200 to 300 mm
12.6.3 300 to 400 mm
12.6.4 Above 400 mm
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Market Size Forecast by Applications
12.10.1 Passenger Vehicle
12.10.2 Commercial Vehicle
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Market Size Forecast by Type
13.6.1 Below 200 mm
13.6.2 200 to 300 mm
13.6.3 300 to 400 mm
13.6.4 Above 400 mm
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Market Size Forecast by Applications
13.10.1 Passenger Vehicle
13.10.2 Commercial Vehicle
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Automotive Single Disc Clutch Market: Competitive Dashboard
14.2 Global Automotive Single Disc Clutch Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Schaeffler (Luk)
14.3.2 ZF (Sachs)
14.3.3 Valeo
14.3.4 F.C.C.
14.3.5 Exedy
14.3.6 Borgwarner
14.3.7 Eaton
14.3.8 Aisin
14.3.9 CNC Driveline
14.3.10 Zhejiang Tieliu
14.3.11 Schaeffler (Luk)
14.3.12 Hubei Tri-Ring
14.3.13 Chuangcun Yidong
14.3.14 Wuhu Hefeng
14.3.15 Rongcheng Huanghai
14.3.16 Guilin Fuda
14.3.17 Hangzhou Qidie