Market Overview:
The global automotive twin camshafts market is estimated to be valued at US$ XX Mn in 2018 and is projected to reach US$ XX Mn by 2030, exhibiting a CAGR of X.X% during the forecast period. The market growth can be attributed to the increasing demand for passenger vehicles and commercial vehicles across the globe. The global automotive twin camshafts market has been segmented on the basis of type, application and region. On the basis of type, the global automotive twin camshafts market has been segmented into integral camshaft and assembled camshaft.
Product Definition:
An automotive twin camshaft is a type of engine that uses two camshafts instead of the one found in most engines. The purpose of using two cams is to improve performance and fuel economy. The twin camshaft setup allows for more precise valve timing, which leads to better engine breathing and more power. Additionally, having two cams allows for the use of smaller valves, which improves fuel economy.
Integral Camshaft:
The integral camshaft is a method of assembling two crankshafts into a single unit. The method allows for easier maintenance and also reduces the number of components in the engine, this results in less weight being carried by the chain and sprockets resulting in better acceleration.
The automotive industry has been witnessing an increase in demand for smaller engines with higher fuel efficiency, which has resulted into increased use of Twin Camshaft engines.
Assembled Camshaft:
Assembled camshaft is a combination of two camshafts, one for each cylinder bank. It is assembled as an aftermarket component and used in automotive engines to provide double the valve lift without increasing the overall engine capacity. This device helps to balance uneven workload between cylinders and improve fuel efficiency at low speeds by reducing exhaust gas temperatures.
Application Insights:
The passenger vehicle segment accounted for the largest share of over 70.0% in 2017. The demand for automotive twins is increasing owing to its ability to provide smooth and seamless power delivery across a broad range of engine speeds, improved fuel economy and reduced emissions coupled with low maintenance cost as compared to single camshaft engines.
The commercial vehicle segment is expected to witness significant growth over the forecast period due primarily to rising demand from developing countries such as India, Indonesia, Malaysia and others in Asia Pacific region which are at present suffering from a dearth of supply due mainlyto restrictions imposed by labor unions on foreign direct investments (FDIs) in these countries. In addition, stringent government regulations regarding reduction of vehicular emissions will further boost the product demand over the forecast period globally.
Regional Analysis:
Asia Pacific is anticipated to be the fastest-growing market, registering a CAGR of XX% from 2018 to 2030 owing to rapid industrialization and increasing per capita income in developing economies such as China and India. Furthermore, rising sales of premium cars in these countries will drive the demand for auto twin camshafts over the forecast period.
North America accounted for more than 25% share of global revenue in 2017 on account of high product penetration rates coupled with stringent CAFE regulations implemented by U.S., Canadian governments across all brands that need higher fuel economy from their passenger cars at a relatively lower cost compared to auto twins with larger displacement engines.
Growth Factors:
- Increasing demand for fuel-efficient and high-performance vehicles
- Rising disposable income of consumers in developing countries
- Technological advancements in automotive twin camshafts systems
- Stringent emission norms by regulatory authorities worldwide
- Growing popularity of sports cars and luxury vehicles
Scope Of The Report
Report Attributes
Report Details
Report Title
Automotive Twin Camshafts Market Research Report
By Type
Integral Camshaft, Assembled Camshaft
By Application
Passenger Vehicle, Commercial Vehicle
By Companies
Mahle GmbH, JBM Group, JD Norman Industries Inc, Meritor Inc, Varroc Group, Precision Camshafts Limited, ThyssenKrupp AG, Linamar Corporation, Kautex, Schrick Camshaft, Mahle GmbH
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
142
Number of Tables & Figures
100
Customization Available
Yes, the report can be customized as per your need.
Global Automotive Twin Camshafts Market Report Segments:
The global Automotive Twin Camshafts market is segmented on the basis of:
Types
Integral Camshaft, Assembled Camshaft
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Passenger Vehicle, Commercial Vehicle
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Mahle GmbH
- JBM Group
- JD Norman Industries Inc
- Meritor Inc
- Varroc Group
- Precision Camshafts Limited
- ThyssenKrupp AG
- Linamar Corporation
- Kautex
- Schrick Camshaft
- Mahle GmbH
Highlights of The Automotive Twin Camshafts Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Integral Camshaft
- Assembled Camshaft
- By Application:
- Passenger Vehicle
- Commercial Vehicle
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Automotive Twin Camshafts Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Automotive twin camshafts are two camshafts that work together to provide power to a car's engine. They allow the engine to make more power at high RPMs, and they also help the engine run smoother.
Some of the major players in the automotive twin camshafts market are Mahle GmbH, JBM Group, JD Norman Industries Inc, Meritor Inc, Varroc Group, Precision Camshafts Limited, ThyssenKrupp AG, Linamar Corporation, Kautex, Schrick Camshaft, Mahle GmbH.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Automotive Twin Camshafts Market Overview 4.1 Introduction 4.1.1 Market Taxonomy 4.1.2 Market Definition 4.1.3 Macro-Economic Factors Impacting the Market Growth 4.2 Automotive Twin Camshafts Market Dynamics 4.2.1 Market Drivers 4.2.2 Market Restraints 4.2.3 Market Opportunity 4.3 Automotive Twin Camshafts Market - Supply Chain Analysis 4.3.1 List of Key Suppliers 4.3.2 List of Key Distributors 4.3.3 List of Key Consumers 4.4 Key Forces Shaping the Automotive Twin Camshafts Market 4.4.1 Bargaining Power of Suppliers 4.4.2 Bargaining Power of Buyers 4.4.3 Threat of Substitution 4.4.4 Threat of New Entrants 4.4.5 Competitive Rivalry 4.5 Global Automotive Twin Camshafts Market Size & Forecast, 2018-2028 4.5.1 Automotive Twin Camshafts Market Size and Y-o-Y Growth 4.5.2 Automotive Twin Camshafts Market Absolute $ Opportunity
Chapter 5 Global Automotive Twin Camshafts Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Automotive Twin Camshafts Market Size Forecast by Type
5.2.1 Integral Camshaft
5.2.2 Assembled Camshaft
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Automotive Twin Camshafts Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Automotive Twin Camshafts Market Size Forecast by Applications
6.2.1 Passenger Vehicle
6.2.2 Commercial Vehicle
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Automotive Twin Camshafts Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Automotive Twin Camshafts Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Automotive Twin Camshafts Analysis and Forecast
9.1 Introduction
9.2 North America Automotive Twin Camshafts Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Automotive Twin Camshafts Market Size Forecast by Type
9.6.1 Integral Camshaft
9.6.2 Assembled Camshaft
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Automotive Twin Camshafts Market Size Forecast by Applications
9.10.1 Passenger Vehicle
9.10.2 Commercial Vehicle
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Automotive Twin Camshafts Analysis and Forecast
10.1 Introduction
10.2 Europe Automotive Twin Camshafts Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Automotive Twin Camshafts Market Size Forecast by Type
10.6.1 Integral Camshaft
10.6.2 Assembled Camshaft
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Automotive Twin Camshafts Market Size Forecast by Applications
10.10.1 Passenger Vehicle
10.10.2 Commercial Vehicle
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Automotive Twin Camshafts Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Automotive Twin Camshafts Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Automotive Twin Camshafts Market Size Forecast by Type
11.6.1 Integral Camshaft
11.6.2 Assembled Camshaft
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Automotive Twin Camshafts Market Size Forecast by Applications
11.10.1 Passenger Vehicle
11.10.2 Commercial Vehicle
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Automotive Twin Camshafts Analysis and Forecast
12.1 Introduction
12.2 Latin America Automotive Twin Camshafts Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Automotive Twin Camshafts Market Size Forecast by Type
12.6.1 Integral Camshaft
12.6.2 Assembled Camshaft
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Automotive Twin Camshafts Market Size Forecast by Applications
12.10.1 Passenger Vehicle
12.10.2 Commercial Vehicle
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Automotive Twin Camshafts Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Automotive Twin Camshafts Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Automotive Twin Camshafts Market Size Forecast by Type
13.6.1 Integral Camshaft
13.6.2 Assembled Camshaft
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Automotive Twin Camshafts Market Size Forecast by Applications
13.10.1 Passenger Vehicle
13.10.2 Commercial Vehicle
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Automotive Twin Camshafts Market: Competitive Dashboard
14.2 Global Automotive Twin Camshafts Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Mahle GmbH
14.3.2 JBM Group
14.3.3 JD Norman Industries Inc
14.3.4 Meritor Inc
14.3.5 Varroc Group
14.3.6 Precision Camshafts Limited
14.3.7 ThyssenKrupp AG
14.3.8 Linamar Corporation
14.3.9 Kautex
14.3.10 Schrick Camshaft
14.3.11 Mahle GmbH