Market Overview:
The global barrier films market is expected to grow at a CAGR of 5.5% during the forecast period from 2018 to 2030. The market growth can be attributed to the increasing demand for barrier films from various end-use industries, such as automotive, consumer electronics, telecom, and industrial. In terms of type, the axial fans segment is expected to lead the global barrier films market during the forecast period. This can be attributed to the growing demand for axial fans in various end-use industries across different regions.
Product Definition:
Barrier Films are thin films that are used to protect surfaces from the environment and from other materials. They can also be used to control the transfer of fluids and gases. Barrier films are important because they help to protect surfaces from damage, and they can help to improve the performance of products.
Axial Fans:
Axial fans are used in barrier films for the purpose of increasing the flow rate and improving its efficiency. The growth factor responsible for axial fan’s growth is due to a change in water pressure which results into increased flow rate.
Centrifugal Fans:
Centrifugal fans are used in the production of barrier films. These fans are installed at the beginning of a long pipeline to improve the flow rate and quality of fluid along the length of that pipeline. The centrifugal force created by these fans helps push air into the long-distance flow lines, thereby improving its velocity and quality.
Application Insights:
The ventilation barrier films are primarily used in ventilation applications up to a height of 200mm. The market is dominated by North America, which has a higher number of production units and consumption patterns. Increasing construction activities in emerging economies such as India, China, Thailand and Indonesia is expected to drive the demand for the product over the forecast period.
Barrier films are also used in automobile applications below or equal to 200mm from ground level including underbody space for noise insulation, thermal insulation or heat dissipation purposes. These products help reduce heat transfer from engine compartment into passenger compartment by more than 40%. They can also prevent transmission loss caused due to friction generated between differentials when they come into contact with road surface causing vehicle jerks and shakes while driving at high speeds on bumpy roads.
Regional Analysis:
Asia Pacific is expected to be the fastest-growing regional market with a CAGR of XX% from 2018 to 2030 owing to rapid industrialization and increasing adoption in various applications including ventilation, agriculture, mining, automotive and others. The region has been witnessing an increase in building & construction activities due to regulatory support for infrastructure development along with rising consumer demand for housing which will drive the industry growth over the forecast period.
The European market was valued at USD X million in 2017 and is projected to witness moderate growth over the forecast period owing to stringent regulations regarding pollution caused by fans coupled with growing awareness about energy conservationism among consumers will drive this industry growth.
Growth Factors:
- Increasing demand for Barrier Films from food and beverage packaging industry as it helps in extending the shelf life of the product.
- Rising demand for Barrier Films from medical and healthcare sector as it helps in protecting sensitive products from moisture, oxygen, light and other contaminants.
- Growing popularity of flexible packaging formats which is driving the demand for Barrier Films globally.
- Rapid urbanization coupled with rising disposable income is propelling the growth of food & beverage industry thereby fueling the growth of Barrier Films market worldwide.
Scope Of The Report
Report Attributes
Report Details
Report Title
Barrier Films Market Research Report
By Type
Axial Fans, Centrifugal Fans, Others
By Application
Ventilation (Above 200mm), Agriculture, Mining, Marine, Others, Automobile (Below and equal to 200mm), Consumer Electronics, Telecom, Industrial, Others
By Companies
Ebm-papst, Delta Group, ZIEHL Abegg, NMB, SUNON, Nidec Corporation, Sanyo Denki, Aerovent, Horton, SPAL Automotive, DENSO, ADDA, AVC, AMETEK.Inc, Rosenberg, Multi-Wing America
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
182
Number of Tables & Figures
128
Customization Available
Yes, the report can be customized as per your need.
Global Barrier Films Market Report Segments:
The global Barrier Films market is segmented on the basis of:
Types
Axial Fans, Centrifugal Fans, Others
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Ventilation (Above 200mm), Agriculture, Mining, Marine, Others, Automobile (Below and equal to 200mm), Consumer Electronics, Telecom, Industrial, Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Ebm-papst
- Delta Group
- ZIEHL Abegg
- NMB
- SUNON
- Nidec Corporation
- Sanyo Denki
- Aerovent
- Horton
- SPAL Automotive
- DENSO
- ADDA
- AVC
- AMETEK.Inc
- Rosenberg
- Multi-Wing America
Highlights of The Barrier Films Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Axial Fans
- Centrifugal Fans
- Others
- By Application:
- Ventilation (Above 200mm)
- Agriculture
- Mining
- Marine
- Others
- Automobile (Below and equal to 200mm)
- Consumer Electronics
- Telecom
- Industrial
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Barrier Films Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Barrier Films is a film production company based in London. It was founded in 1984 by producer and director John Maybury.
Some of the key players operating in the barrier films market are Ebm-papst, Delta Group, ZIEHL Abegg, NMB, SUNON, Nidec Corporation, Sanyo Denki, Aerovent, Horton, SPAL Automotive, DENSO, ADDA, AVC, AMETEK.Inc, Rosenberg, Multi-Wing America.
The barrier films market is expected to register a CAGR of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Barrier Films Market Overview 4.1 Introduction 4.1.1 Market Taxonomy 4.1.2 Market Definition 4.1.3 Macro-Economic Factors Impacting the Market Growth 4.2 Barrier Films Market Dynamics 4.2.1 Market Drivers 4.2.2 Market Restraints 4.2.3 Market Opportunity 4.3 Barrier Films Market - Supply Chain Analysis 4.3.1 List of Key Suppliers 4.3.2 List of Key Distributors 4.3.3 List of Key Consumers 4.4 Key Forces Shaping the Barrier Films Market 4.4.1 Bargaining Power of Suppliers 4.4.2 Bargaining Power of Buyers 4.4.3 Threat of Substitution 4.4.4 Threat of New Entrants 4.4.5 Competitive Rivalry 4.5 Global Barrier Films Market Size & Forecast, 2020-2028 4.5.1 Barrier Films Market Size and Y-o-Y Growth 4.5.2 Barrier Films Market Absolute $ Opportunity
Chapter 5 Global Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Market Size Forecast by Type
5.2.1 Axial Fans
5.2.2 Centrifugal Fans
5.2.3 Others
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Market Size Forecast by Applications
6.2.1 Ventilation (Above 200mm)
6.2.2 Agriculture
6.2.3 Mining
6.2.4 Marine
6.2.5 Others
6.2.6 Automobile (Below and equal to 200mm)
6.2.7 Consumer Electronics
6.2.8 Telecom
6.2.9 Industrial
6.2.10 Others
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Barrier Films Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Barrier Films Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Analysis and Forecast
9.1 Introduction
9.2 North America Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Market Size Forecast by Type
9.6.1 Axial Fans
9.6.2 Centrifugal Fans
9.6.3 Others
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Market Size Forecast by Applications
9.10.1 Ventilation (Above 200mm)
9.10.2 Agriculture
9.10.3 Mining
9.10.4 Marine
9.10.5 Others
9.10.6 Automobile (Below and equal to 200mm)
9.10.7 Consumer Electronics
9.10.8 Telecom
9.10.9 Industrial
9.10.10 Others
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Analysis and Forecast
10.1 Introduction
10.2 Europe Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Market Size Forecast by Type
10.6.1 Axial Fans
10.6.2 Centrifugal Fans
10.6.3 Others
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Market Size Forecast by Applications
10.10.1 Ventilation (Above 200mm)
10.10.2 Agriculture
10.10.3 Mining
10.10.4 Marine
10.10.5 Others
10.10.6 Automobile (Below and equal to 200mm)
10.10.7 Consumer Electronics
10.10.8 Telecom
10.10.9 Industrial
10.10.10 Others
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Market Size Forecast by Type
11.6.1 Axial Fans
11.6.2 Centrifugal Fans
11.6.3 Others
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Market Size Forecast by Applications
11.10.1 Ventilation (Above 200mm)
11.10.2 Agriculture
11.10.3 Mining
11.10.4 Marine
11.10.5 Others
11.10.6 Automobile (Below and equal to 200mm)
11.10.7 Consumer Electronics
11.10.8 Telecom
11.10.9 Industrial
11.10.10 Others
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Analysis and Forecast
12.1 Introduction
12.2 Latin America Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Market Size Forecast by Type
12.6.1 Axial Fans
12.6.2 Centrifugal Fans
12.6.3 Others
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Market Size Forecast by Applications
12.10.1 Ventilation (Above 200mm)
12.10.2 Agriculture
12.10.3 Mining
12.10.4 Marine
12.10.5 Others
12.10.6 Automobile (Below and equal to 200mm)
12.10.7 Consumer Electronics
12.10.8 Telecom
12.10.9 Industrial
12.10.10 Others
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Market Size Forecast by Type
13.6.1 Axial Fans
13.6.2 Centrifugal Fans
13.6.3 Others
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Market Size Forecast by Applications
13.10.1 Ventilation (Above 200mm)
13.10.2 Agriculture
13.10.3 Mining
13.10.4 Marine
13.10.5 Others
13.10.6 Automobile (Below and equal to 200mm)
13.10.7 Consumer Electronics
13.10.8 Telecom
13.10.9 Industrial
13.10.10 Others
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Barrier Films Market: Competitive Dashboard
14.2 Global Barrier Films Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Ebm-papst
14.3.2 Delta Group
14.3.3 ZIEHL Abegg
14.3.4 NMB
14.3.5 SUNON
14.3.6 Nidec Corporation
14.3.7 Sanyo Denki
14.3.8 Aerovent
14.3.9 Horton
14.3.10 SPAL Automotive
14.3.11 DENSO
14.3.12 ADDA
14.3.13 AVC
14.3.14 AMETEK.Inc
14.3.15 Rosenberg
14.3.16 Multi-Wing America