Market Overview:
The global blown film extrusion machinery market is expected to grow at a CAGR of 5.5% during the forecast period from 2018 to 2030. The growth in this market can be attributed to the increasing demand for packaging and insulation products across the globe. In terms of type, the 3 layer blown film extrusion machinery segment is expected to hold a major share of the global blown film extrusion machinery market during the forecast period. This can be attributed to its low cost and easy installation as compared to other types of blown film extrusion machines.
Product Definition:
The blown film extrusion machinery is used to produce plastic films from molten plastic. The films are blown through a die and inflated like a balloon to form a thin sheet.
3 Layer Blown Film Extrusion Machinery:
3 layer blown film extrusion machinery is used to manufacture three-layer blown film. It consists of four major components, namely nip rollers, blow mold, stretch wrapper and fill machine. The most important factor contributing to the growth of this market is its increasing demand in end-use industries such as electrical & electronics packaging and healthcare among others.
7 Layer Blown Film Extrusion Machinery:
7 layer blown film extrusion machinery is used to manufacture 7-layer blown film. It has the ability to produce films with different thickness from 0.4mm up to 1.2mm and can be customized based on customer requirements.
Application Insights:
The packaging application segment accounted for the largest revenue share in 2017 and is projected to continue its dominance over the forecast period. The growth of this segment can be attributed to increasing demand for food & beverages, consumer goods and industrial products. Blown film extrusion machinery is used to manufacture packaging films that are used across a wide range of industries including food & beverage, pharmaceuticals, cosmetics and paper.
PE was the second-largest application segment in 2017 owing to high product demand from various end-use industries such as construction materials (architectural foams), automotive components (tires) and electrical appliances (microwaveable laminates). PP is expected to be one of the fastest growing applications on account of rising product penetration in numerous end-use industries such as construction materials (flooring), automotive components (valve covers) electrical appliances etc.
Regional Analysis:
Asia Pacific dominated the global market in 2017 and is expected to continue its dominance over the forecast period. The growth of this region can be attributed to increasing demand for PP, PVC and PE film from end-use industries such as packaging, automotive, construction and others. China is one of the largest producers of these films in this region owing to easy availability of raw materials coupled with cheap labor cost.
The demand for extruded polypropylene (PP) film in North America was estimated at USD X million in 2017 on account rising consumer preference towards plastic products due to their lightweight advantages as compared to metal counterparts. Moreover, growing use of PP based films across a broad range of applications including food & beverage containers along with bottle caps & lids by manufacturers such as PepsiCo Inc.; Danone S.A.; Nestl©; Colgate-Palmolive Co.
Growth Factors:
- Increasing demand for lightweight and durable packaging materials
- Rising demand from automotive and construction industries
- Growing popularity of flexible packaging solutions
- Technological advancements in blown film extrusion machinery industry
- Rising disposable income of consumers
Scope Of The Report
Report Attributes
Report Details
Report Title
Blown Film Extrusion Machinery Market Research Report
By Type
3 Layer Blown Film Extrusion Machinery, 7 Layer Blown Film Extrusion Machinery, Others
By Application
PE, PP, PVC, Others
By Companies
Jenn Chong, Ye I Machinery Factory, Windsor Machines, Polystar, Karlville Development, Chyi Yang, Kung Hsing, Fong Kee International Machinery, Colines, Addex, Jenn Chong, GAP, Alpha Marathon Technologies Group, Brampton Engineering
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
132
Number of Tables & Figures
93
Customization Available
Yes, the report can be customized as per your need.
Global Blown Film Extrusion Machinery Market Report Segments:
The global Blown Film Extrusion Machinery market is segmented on the basis of:
Types
3 Layer Blown Film Extrusion Machinery, 7 Layer Blown Film Extrusion Machinery, Others
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
PE, PP, PVC, Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Jenn Chong
- Ye I Machinery Factory
- Windsor Machines
- Polystar
- Karlville Development
- Chyi Yang
- Kung Hsing
- Fong Kee International Machinery
- Colines
- Addex
- Jenn Chong
- GAP
- Alpha Marathon Technologies Group
- Brampton Engineering
Highlights of The Blown Film Extrusion Machinery Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- 3 Layer Blown Film Extrusion Machinery
- 7 Layer Blown Film Extrusion Machinery
- Others
- By Application:
- PE
- PP
- PVC
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Blown Film Extrusion Machinery Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Blown Film Extrusion Machinery is a type of extrusion machinery that uses air pressure and heated gas to blow film or plastic sheets through a die to create products such as films, plates, bottles and other shapes.
Some of the major companies in the blown film extrusion machinery market are Jenn Chong, Ye I Machinery Factory, Windsor Machines, Polystar, Karlville Development, Chyi Yang, Kung Hsing, Fong Kee International Machinery, Colines, Addex, Jenn Chong, GAP, Alpha Marathon Technologies Group, Brampton Engineering.
The blown film extrusion machinery market is expected to grow at a compound annual growth rate of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Blown Film Extrusion Machinery Market Overview 4.1 Introduction 4.1.1 Market Taxonomy 4.1.2 Market Definition 4.1.3 Macro-Economic Factors Impacting the Market Growth 4.2 Blown Film Extrusion Machinery Market Dynamics 4.2.1 Market Drivers 4.2.2 Market Restraints 4.2.3 Market Opportunity 4.3 Blown Film Extrusion Machinery Market - Supply Chain Analysis 4.3.1 List of Key Suppliers 4.3.2 List of Key Distributors 4.3.3 List of Key Consumers 4.4 Key Forces Shaping the Blown Film Extrusion Machinery Market 4.4.1 Bargaining Power of Suppliers 4.4.2 Bargaining Power of Buyers 4.4.3 Threat of Substitution 4.4.4 Threat of New Entrants 4.4.5 Competitive Rivalry 4.5 Global Blown Film Extrusion Machinery Market Size & Forecast, 2018-2028 4.5.1 Blown Film Extrusion Machinery Market Size and Y-o-Y Growth 4.5.2 Blown Film Extrusion Machinery Market Absolute $ Opportunity
Chapter 5 Global Blown Film Extrusion Machinery Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Blown Film Extrusion Machinery Market Size Forecast by Type
5.2.1 3 Layer Blown Film Extrusion Machinery
5.2.2 7 Layer Blown Film Extrusion Machinery
5.2.3 Others
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Blown Film Extrusion Machinery Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Blown Film Extrusion Machinery Market Size Forecast by Applications
6.2.1 PE
6.2.2 PP
6.2.3 PVC
6.2.4 Others
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Blown Film Extrusion Machinery Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Blown Film Extrusion Machinery Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Blown Film Extrusion Machinery Analysis and Forecast
9.1 Introduction
9.2 North America Blown Film Extrusion Machinery Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Blown Film Extrusion Machinery Market Size Forecast by Type
9.6.1 3 Layer Blown Film Extrusion Machinery
9.6.2 7 Layer Blown Film Extrusion Machinery
9.6.3 Others
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Blown Film Extrusion Machinery Market Size Forecast by Applications
9.10.1 PE
9.10.2 PP
9.10.3 PVC
9.10.4 Others
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Blown Film Extrusion Machinery Analysis and Forecast
10.1 Introduction
10.2 Europe Blown Film Extrusion Machinery Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Blown Film Extrusion Machinery Market Size Forecast by Type
10.6.1 3 Layer Blown Film Extrusion Machinery
10.6.2 7 Layer Blown Film Extrusion Machinery
10.6.3 Others
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Blown Film Extrusion Machinery Market Size Forecast by Applications
10.10.1 PE
10.10.2 PP
10.10.3 PVC
10.10.4 Others
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Blown Film Extrusion Machinery Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Blown Film Extrusion Machinery Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Blown Film Extrusion Machinery Market Size Forecast by Type
11.6.1 3 Layer Blown Film Extrusion Machinery
11.6.2 7 Layer Blown Film Extrusion Machinery
11.6.3 Others
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Blown Film Extrusion Machinery Market Size Forecast by Applications
11.10.1 PE
11.10.2 PP
11.10.3 PVC
11.10.4 Others
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Blown Film Extrusion Machinery Analysis and Forecast
12.1 Introduction
12.2 Latin America Blown Film Extrusion Machinery Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Blown Film Extrusion Machinery Market Size Forecast by Type
12.6.1 3 Layer Blown Film Extrusion Machinery
12.6.2 7 Layer Blown Film Extrusion Machinery
12.6.3 Others
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Blown Film Extrusion Machinery Market Size Forecast by Applications
12.10.1 PE
12.10.2 PP
12.10.3 PVC
12.10.4 Others
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Blown Film Extrusion Machinery Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Blown Film Extrusion Machinery Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Blown Film Extrusion Machinery Market Size Forecast by Type
13.6.1 3 Layer Blown Film Extrusion Machinery
13.6.2 7 Layer Blown Film Extrusion Machinery
13.6.3 Others
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Blown Film Extrusion Machinery Market Size Forecast by Applications
13.10.1 PE
13.10.2 PP
13.10.3 PVC
13.10.4 Others
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Blown Film Extrusion Machinery Market: Competitive Dashboard
14.2 Global Blown Film Extrusion Machinery Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Jenn Chong
14.3.2 Ye I Machinery Factory
14.3.3 Windsor Machines
14.3.4 Polystar
14.3.5 Karlville Development
14.3.6 Chyi Yang
14.3.7 Kung Hsing
14.3.8 Fong Kee International Machinery
14.3.9 Colines
14.3.10 Addex
14.3.11 Jenn Chong
14.3.12 GAP
14.3.13 Alpha Marathon Technologies Group
14.3.14 Brampton Engineering