Market Overview:
The global breathable polypropylene membranes market is expected to grow at a CAGR of 5.5% from 2018 to 2030. The growth in the market can be attributed to the increasing demand for breathable polypropylene membranes in inclined rooftop and wall applications. In addition, the growing demand for green roofs is also contributing to the growth of this market. North America dominates the global breathable polypropylene membranes market, followed by Europe and Asia Pacific.
Product Definition:
Breathable Polypropylene Membranes are thin sheets of material that allow water vapor and air to pass through while preventing the passage of liquid water. They are used in a variety of applications, including roofing, insulation, and as membranes in geotextiles. The importance of breathable polypropylene membranes lies in their ability to keep building materials dry while still allowing them to "breathe." This prevents the formation of mold and mildew, which can cause health problems for people living or working in the structure.
Monolayer:
Monolayer is a single layer of material and it can be applied to almost all surfaces. It has applications in construction, packaging, electronics & semiconductors, automotive & transportation and several other industries. Monolayer materials are expected to witness significant growth on account of their properties such as water vapor permeability (WVP), gas barrier ability (GBL), chemical resistance (CR) and low dielectric constant (lowest value).
Double Layer:
Double layer is a type of breathable membrane that consists of two layers of polypropylene film. The top sheet acts as an adhesive and the bottom sheet as a seal. These membranes are used in applications where vapor or gas permeability is required along with water vapor resistance such as underlayment for roofing, flooring, wall sheathing, insulation panels and other building components.
The global double layer.
Application Insights:
Inclined rooftop was the largest application segment in 2017 and is expected to continue its dominance over the forecast period. These membranes are widely used in inclined rooftops as they allow water to drain through the roof, which prevents building flooding. They are also used for air conditioning and ventilation purposes. The product is lightweight, cost-effective, easy to install and can be replaced quickly when damaged or worn out.
The wall application segment is projected register a CAGR of XX% from 2018 to 2030 owing to rising demand from commercial buildings including hospitals, hotels etc., where hygiene is important for maintaining workplace cleanliness along with improving employee productivity & morale at work place.
Regional Analysis:
Asia Pacific was the dominant regional market in 2017 and is expected to continue its dominance over the forecast period. The region accounted for a revenue share of more than 35% in 2017 owing to increasing construction activities mainly in China, India, Japan, and Australia. Moreover, rising infrastructural developments such as airports are also anticipated to drive product demand over the forecast period.
The global breathable polypropylene membranes industry is expected to witness significant growth on account of growing infrastructure development especially in emerging economies such as China and India coupled with an increase in residential constructions which include houses & apartments complexes along with hotels & restaurants buildings across various cities including New Delhi NCR (National Capital Region), Mumbai City Centre Airport Area etc., thereby driving product demand over the projected period.
Growth Factors:
- Increasing demand for breathable polypropylene membranes in the medical industry for artificial lungs, dialysis machines, and other medical devices.
- Rising demand from the water treatment sector for use in reverse osmosis systems and other water purification applications.
- Growing popularity of polypropylene membranes in food processing and packaging industries due to their superior gas permeability and chemical resistance properties.
- Increasing application of breathable polypropylene membranes in air separation and gas separation processes across various industrial sectors.
Scope Of The Report
Report Attributes
Report Details
Report Title
Breathable Polypropylene Membranes Market Research Report
By Type
Monolayer, Double Layer, Three Layers, Others
By Application
Inclined Rooftop, Wall
By Companies
Cosella-Dorken, DuPont, Soprema, GAF Material Corporation, Saint Gobain SA, Kingspan Group PLC, Klober, Cromar Building Products Ltd
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
243
Number of Tables & Figures
171
Customization Available
Yes, the report can be customized as per your need.
Global Breathable Polypropylene Membranes Market Report Segments:
The global Breathable Polypropylene Membranes market is segmented on the basis of:
Types
Monolayer, Double Layer, Three Layers, Others
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Inclined Rooftop, Wall
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Cosella-Dorken
- DuPont
- Soprema
- GAF Material Corporation
- Saint Gobain SA
- Kingspan Group PLC
- Klober
- Cromar Building Products Ltd
Highlights of The Breathable Polypropylene Membranes Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Monolayer
- Double Layer
- Three Layers
- Others
- By Application:
- Inclined Rooftop
- Wall
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Breathable Polypropylene Membranes Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Breathable polypropylene membranes are made from a type of plastic that allows air and moisture to pass through it, but blocks bacteria and other contaminants. This makes them an ideal material for applications where cleanliness is important, such as food processing plants or hospitals.
Some of the major companies in the breathable polypropylene membranes market are Cosella-Dorken, DuPont, Soprema, GAF Material Corporation, Saint Gobain SA, Kingspan Group PLC, Klober, Cromar Building Products Ltd.
The breathable polypropylene membranes market is expected to register a CAGR of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Breathable Polypropylene Membranes Market Overview
4.1 Introduction
4.1.1 Market Taxonomy
4.1.2 Market Definition
4.1.3 Macro-Economic Factors Impacting the Market Growth
4.2 Breathable Polypropylene Membranes Market Dynamics
4.2.1 Market Drivers
4.2.2 Market Restraints
4.2.3 Market Opportunity
4.3 Breathable Polypropylene Membranes Market - Supply Chain Analysis
4.3.1 List of Key Suppliers
4.3.2 List of Key Distributors
4.3.3 List of Key Consumers
4.4 Key Forces Shaping the Breathable Polypropylene Membranes Market
4.4.1 Bargaining Power of Suppliers
4.4.2 Bargaining Power of Buyers
4.4.3 Threat of Substitution
4.4.4 Threat of New Entrants
4.4.5 Competitive Rivalry
4.5 Global Breathable Polypropylene Membranes Market Size & Forecast, 2018-2028
4.5.1 Breathable Polypropylene Membranes Market Size and Y-o-Y Growth
4.5.2 Breathable Polypropylene Membranes Market Absolute $ Opportunity
Chapter 5 Global Breathable Polypropylene Membranes Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Breathable Polypropylene Membranes Market Size Forecast by Type
5.2.1 Monolayer
5.2.2 Double Layer
5.2.3 Three Layers
5.2.4 Others
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Breathable Polypropylene Membranes Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Breathable Polypropylene Membranes Market Size Forecast by Applications
6.2.1 Inclined Rooftop
6.2.2 Wall
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Breathable Polypropylene Membranes Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Breathable Polypropylene Membranes Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Breathable Polypropylene Membranes Analysis and Forecast
9.1 Introduction
9.2 North America Breathable Polypropylene Membranes Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Breathable Polypropylene Membranes Market Size Forecast by Type
9.6.1 Monolayer
9.6.2 Double Layer
9.6.3 Three Layers
9.6.4 Others
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Breathable Polypropylene Membranes Market Size Forecast by Applications
9.10.1 Inclined Rooftop
9.10.2 Wall
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Breathable Polypropylene Membranes Analysis and Forecast
10.1 Introduction
10.2 Europe Breathable Polypropylene Membranes Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Breathable Polypropylene Membranes Market Size Forecast by Type
10.6.1 Monolayer
10.6.2 Double Layer
10.6.3 Three Layers
10.6.4 Others
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Breathable Polypropylene Membranes Market Size Forecast by Applications
10.10.1 Inclined Rooftop
10.10.2 Wall
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Breathable Polypropylene Membranes Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Breathable Polypropylene Membranes Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Breathable Polypropylene Membranes Market Size Forecast by Type
11.6.1 Monolayer
11.6.2 Double Layer
11.6.3 Three Layers
11.6.4 Others
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Breathable Polypropylene Membranes Market Size Forecast by Applications
11.10.1 Inclined Rooftop
11.10.2 Wall
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Breathable Polypropylene Membranes Analysis and Forecast
12.1 Introduction
12.2 Latin America Breathable Polypropylene Membranes Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Breathable Polypropylene Membranes Market Size Forecast by Type
12.6.1 Monolayer
12.6.2 Double Layer
12.6.3 Three Layers
12.6.4 Others
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Breathable Polypropylene Membranes Market Size Forecast by Applications
12.10.1 Inclined Rooftop
12.10.2 Wall
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Breathable Polypropylene Membranes Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Breathable Polypropylene Membranes Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Breathable Polypropylene Membranes Market Size Forecast by Type
13.6.1 Monolayer
13.6.2 Double Layer
13.6.3 Three Layers
13.6.4 Others
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Breathable Polypropylene Membranes Market Size Forecast by Applications
13.10.1 Inclined Rooftop
13.10.2 Wall
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Breathable Polypropylene Membranes Market: Competitive Dashboard
14.2 Global Breathable Polypropylene Membranes Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Cosella-Dorken
14.3.2 DuPont
14.3.3 Soprema
14.3.4 GAF Material Corporation
14.3.5 Saint Gobain SA
14.3.6 Kingspan Group PLC
14.3.7 Klober
14.3.8 Cromar Building Products Ltd
