Market Overview:
The global bumper jack market is expected to grow at a CAGR of 5.5% during the forecast period from 2018 to 2030. The growth in the market can be attributed to the increasing demand for passenger cars and commercial vehicles across the globe. Additionally, factors such as rising income levels and technological advancements are also contributing to the growth of this market. The global bumper jack market can be segmented on the basis of type into pneumatic jack, electric jack, mechanical jack, and hydraulic jack. The pneumatic Jack segment is expected to hold a major share in terms of revenue in 2018 owing to its low cost and easy operation as compared to other types of jacks available in the market.
Product Definition:
A bumper jack is a device used to raise and lower a car using the bumpers. It is important for changing a flat tire, as it allows the user to lift the car off of the ground without having to use their own strength.
Pneumatic Jack:
Pneumatic Jack is a device used to raise a vehicle body off the ground. It's primary function is to facilitate the raising of a car by supporting its weight on all four wheels. The pneumatic jack uses compressed air as an energy source which makes it possible for users to lift cars effortlessly and quickly.
The pneumatic jack has several benefits over traditional methods of lifting such as hydraulic jacks, electromechanical jacks,.
Electric Jack:
Electric jacks are used in various applications such as for raising and lowering the car, towing or to assist with loading and unloading. The most common application of an electric jack is found in a bumper jack which is also known as a recovery or lifting jack.
The usage of electric jacks has increased over the last few years due to technological advancements that have made them more efficient, safer and easier to use.
Application Insights:
The passenger cars segment held the largest share of over 60.0% in 2017. The increasing number of passenger vehicles in developing countries such as China, India and Brazil is expected to boost the product demand over the forecast period. In addition, bumper jacks are used for loading and unloading purposes during transportation of goods by road which will further propel their demand from 2018 to 2030.
Commercial vehicles are projected to be one of the fastest-growing application segments owing to rising industrialization levels across developing countries including China, India and Brazil which increases commercial activities at a domestic level thus propelling market growth from 2018 to 2030. Furthermore, growing investments for improving public infrastructure will boost product adoption across various regions thereby contributing towards market growth during the study period.
Regional Analysis:
Asia Pacific dominated the global market in 2017 and is expected to continue its dominance over the forecast period. The region has been witnessing strong economic growth on account of increasing foreign investments coupled with rising disposable income of consumers, which is subsequently driving automotive sales. Furthermore, supportive government policies for manufacturing vehicles are anticipated to further drive regional growth.
The growing population and rapid urbanization in emerging economies such as India and China have resulted in increased demand for public transportation systems, thereby boosting the product demand across various applications including buses, trams, subways & elevators etc. In addition to this trend towards sustainable development through public transportation systems will boost industry size over the forecast period.
Europe was estimated at USD X million in 2017 owing to high automobile production levels coupled with a well-established automotive sector within Germany and Italy among other countries within Europe that contribute significantly towards industry size as well as revenue generation through exports across various regions worldwide especially North America and Asia Pacific (APAC).
Growth Factors:
- Increasing demand for bumper jack in the automotive industry as a result of rising production of automobiles.
- Growing popularity of off-road vehicles and SUVs, which require use of bumper jacks for lifting and towing purposes.
- Rising number of workshops and service centers that offer installation and repair services for bumpers, thereby driving demand for bumper jacks.
- Technological advancements in the design and functionality of bumper jacks, making them more efficient and user-friendly.
Scope Of The Report
Report Attributes
Report Details
Report Title
Bumper Jack Market Research Report
By Type
Pneumatic Jack, Electric Jack, Mechanical Jack, Hydraulic Jack
By Application
Passenger Cars, Commercial Vehicles
By Companies
Whiting Corporation, Shinn Fu, Macton, Emerson, QuickJack, Jinyun County Zhaoshi Tools, CAP, Dino Paoli, REPCO, MECHPRO, Whiting Corporation
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
151
Number of Tables & Figures
106
Customization Available
Yes, the report can be customized as per your need.
Global Bumper Jack Market Report Segments:
The global Bumper Jack market is segmented on the basis of:
Types
Pneumatic Jack, Electric Jack, Mechanical Jack, Hydraulic Jack
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Passenger Cars, Commercial Vehicles
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Whiting Corporation
- Shinn Fu
- Macton
- Emerson
- QuickJack
- Jinyun County Zhaoshi Tools
- CAP
- Dino Paoli
- REPCO
- MECHPRO
- Whiting Corporation
Highlights of The Bumper Jack Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Pneumatic Jack
- Electric Jack
- Mechanical Jack
- Hydraulic Jack
- By Application:
- Passenger Cars
- Commercial Vehicles
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Bumper Jack Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Bumper Jack is a toy that was invented in the early 1900s. It is a small, plastic figure with two large, round eyes and a wide smile. Bumper Jack is often used as an advertising mascot or to promote products.
Some of the key players operating in the bumper jack market are Whiting Corporation, Shinn Fu, Macton, Emerson, QuickJack, Jinyun County Zhaoshi Tools, CAP, Dino Paoli, REPCO, MECHPRO, Whiting Corporation.
The bumper jack market is expected to grow at a compound annual growth rate of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Bumper Jack Market Overview 4.1 Introduction 4.1.1 Market Taxonomy 4.1.2 Market Definition 4.1.3 Macro-Economic Factors Impacting the Market Growth 4.2 Bumper Jack Market Dynamics 4.2.1 Market Drivers 4.2.2 Market Restraints 4.2.3 Market Opportunity 4.3 Bumper Jack Market - Supply Chain Analysis 4.3.1 List of Key Suppliers 4.3.2 List of Key Distributors 4.3.3 List of Key Consumers 4.4 Key Forces Shaping the Bumper Jack Market 4.4.1 Bargaining Power of Suppliers 4.4.2 Bargaining Power of Buyers 4.4.3 Threat of Substitution 4.4.4 Threat of New Entrants 4.4.5 Competitive Rivalry 4.5 Global Bumper Jack Market Size & Forecast, 2018-2028 4.5.1 Bumper Jack Market Size and Y-o-Y Growth 4.5.2 Bumper Jack Market Absolute $ Opportunity
Chapter 5 Global Bumper Jack Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Bumper Jack Market Size Forecast by Type
5.2.1 Pneumatic Jack
5.2.2 Electric Jack
5.2.3 Mechanical Jack
5.2.4 Hydraulic Jack
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Bumper Jack Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Bumper Jack Market Size Forecast by Applications
6.2.1 Passenger Cars
6.2.2 Commercial Vehicles
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Bumper Jack Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Bumper Jack Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Bumper Jack Analysis and Forecast
9.1 Introduction
9.2 North America Bumper Jack Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Bumper Jack Market Size Forecast by Type
9.6.1 Pneumatic Jack
9.6.2 Electric Jack
9.6.3 Mechanical Jack
9.6.4 Hydraulic Jack
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Bumper Jack Market Size Forecast by Applications
9.10.1 Passenger Cars
9.10.2 Commercial Vehicles
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Bumper Jack Analysis and Forecast
10.1 Introduction
10.2 Europe Bumper Jack Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Bumper Jack Market Size Forecast by Type
10.6.1 Pneumatic Jack
10.6.2 Electric Jack
10.6.3 Mechanical Jack
10.6.4 Hydraulic Jack
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Bumper Jack Market Size Forecast by Applications
10.10.1 Passenger Cars
10.10.2 Commercial Vehicles
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Bumper Jack Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Bumper Jack Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Bumper Jack Market Size Forecast by Type
11.6.1 Pneumatic Jack
11.6.2 Electric Jack
11.6.3 Mechanical Jack
11.6.4 Hydraulic Jack
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Bumper Jack Market Size Forecast by Applications
11.10.1 Passenger Cars
11.10.2 Commercial Vehicles
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Bumper Jack Analysis and Forecast
12.1 Introduction
12.2 Latin America Bumper Jack Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Bumper Jack Market Size Forecast by Type
12.6.1 Pneumatic Jack
12.6.2 Electric Jack
12.6.3 Mechanical Jack
12.6.4 Hydraulic Jack
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Bumper Jack Market Size Forecast by Applications
12.10.1 Passenger Cars
12.10.2 Commercial Vehicles
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Bumper Jack Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Bumper Jack Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Bumper Jack Market Size Forecast by Type
13.6.1 Pneumatic Jack
13.6.2 Electric Jack
13.6.3 Mechanical Jack
13.6.4 Hydraulic Jack
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Bumper Jack Market Size Forecast by Applications
13.10.1 Passenger Cars
13.10.2 Commercial Vehicles
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Bumper Jack Market: Competitive Dashboard
14.2 Global Bumper Jack Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Whiting Corporation
14.3.2 Shinn Fu
14.3.3 Macton
14.3.4 Emerson
14.3.5 QuickJack
14.3.6 Jinyun County Zhaoshi Tools
14.3.7 CAP
14.3.8 Dino Paoli
14.3.9 REPCO
14.3.10 MECHPRO
14.3.11 Whiting Corporation