Market Overview:
The global can liner market is expected to grow at a CAGR of 5.5% during the forecast period from 2018 to 2030. The growth in the market is attributed to the increasing demand for food and beverages, which in turn is fueling the demand for packaging products, such as can liners. In addition, rising awareness about hygiene and environmental protection is also propelling the growth of this market. On the basis of type, HDPE can liners are expected to dominate the global market during the forecast period owing to their high durability and resistance against punctures and tears. On account of their properties such as low permeability and good chemical resistance, LLDPE can liners are also anticipated to witness significant growth duringthe forecast period.
Product Definition:
A can liner is a thin, disposable bag made from paper or plastic that is designed to line a trash can. It helps to prevent the garbage from sticking to the sides of the trash can and makes it easier to clean.
HDPE:
High-density polyethylene, also called HDPE for short, is a polymer with high heat and chemical resistance. It is used in the manufacturing of various products such as plumbing fittings, electrical conduits & tubing (e.g., ducts & pipes), window frames & screens, toys & athletic goods (e.g.
LDPE:
LDPE (Linear Dichloroethylene) is a type of polyethylene that is widely used in the packaging industry. It has high resistance to solvents, acids and bases and has low moisture vapor transmission rate. LDPE can be produced through various processes such as polymerization, copolymerization, ethylene esterification and hydrolysis.
Application Insights:
The household application segment accounted for the largest share of more than 60.0% in 2017. The demand from this application is expected to witness growth owing to increasing disposable income, especially in emerging economies such as China, India and Brazil. In addition, growing preference for using kitchen liners that are easy to clean will boost product demand over the forecast period.
The market place application segment is expected to register a significant CAGR of XX% from 2018 to 2030 on account of high product usage at food service providers including restaurants and hotels across various end-use industries such as healthcare.
Regional Analysis:
Asia Pacific dominated the global market in 2017 and is expected to continue its dominance over the forecast period. The growth of this region can be attributed to increasing construction activities, coupled with rising demand for household & commercial liners. Moreover, growing industrialization in emerging economies such as China and India will drive product demand over the forecast period.
The Asia Pacific market was valued at USD X billion in 2017 and is projected to expand at a CAGR of XX% from 2018 to 2030 owing to rapid urbanization resulting into increased infrastructural development across countries such as China, Indonesia, Malaysia, Philippines etc.
Growth Factors:
- Increasing demand from the food and beverage industry for packaging products that are safe and hygienic.
- Rising disposable income of consumers in developing countries, which is resulting in an increase in demand for packaged goods.
- Rapid urbanization, which is leading to an increase in the number of households that use can liners for waste disposal purposes.
- The increasing popularity of eco-friendly products among consumers worldwide.
Scope Of The Report
Report Attributes
Report Details
Report Title
Can Liner Market Research Report
By Type
HDPE, LDPE, LLDPE, Other
By Application
Households, Schools, Offices, Market Places, Restaurants, Other
By Companies
Allied Plastics, Berry Plastic Corporation, Clorox Australia, Cosmoplast, Heyuan Ruijian Plastic Products, International Plastics, Kemii Garbage Bag, Luban Pack, Novplasta, S.R.O., Allied Plastics
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
199
Number of Tables & Figures
140
Customization Available
Yes, the report can be customized as per your need.
Global Can Liner Market Report Segments:
The global Can Liner market is segmented on the basis of:
Types
HDPE, LDPE, LLDPE, Other
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Households, Schools, Offices, Market Places, Restaurants, Other
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Allied Plastics
- Berry Plastic Corporation
- Clorox Australia
- Cosmoplast
- Heyuan Ruijian Plastic Products
- International Plastics
- Kemii Garbage Bag
- Luban Pack
- Novplasta
- S.R.O.
- Allied Plastics
Highlights of The Can Liner Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- HDPE
- LDPE
- LLDPE
- Other
- By Application:
- Households
- Schools
- Offices
- Market Places
- Restaurants
- Other
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Can Liner Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Can liner is a type of adhesive that is used to seal cans. It can be used for food or beverage cans, and it comes in a variety of colors and strengths. Can liners are often preferred over tape because they are less likely to leave residue on the can surface, and they are also more durable than tape.
Some of the major players in the can liner market are Allied Plastics, Berry Plastic Corporation, Clorox Australia, Cosmoplast, Heyuan Ruijian Plastic Products, International Plastics, Kemii Garbage Bag, Luban Pack, Novplasta, S.R.O., Allied Plastics.
The can liner market is expected to register a CAGR of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Can Liner Market Overview
4.1 Introduction
4.1.1 Market Taxonomy
4.1.2 Market Definition
4.1.3 Macro-Economic Factors Impacting the Market Growth
4.2 Can Liner Market Dynamics
4.2.1 Market Drivers
4.2.2 Market Restraints
4.2.3 Market Opportunity
4.3 Can Liner Market - Supply Chain Analysis
4.3.1 List of Key Suppliers
4.3.2 List of Key Distributors
4.3.3 List of Key Consumers
4.4 Key Forces Shaping the Can Liner Market
4.4.1 Bargaining Power of Suppliers
4.4.2 Bargaining Power of Buyers
4.4.3 Threat of Substitution
4.4.4 Threat of New Entrants
4.4.5 Competitive Rivalry
4.5 Global Can Liner Market Size & Forecast, 2020-2028
4.5.1 Can Liner Market Size and Y-o-Y Growth
4.5.2 Can Liner Market Absolute $ Opportunity
Chapter 5 Global Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Market Size Forecast by Type
5.2.1 HDPE
5.2.2 LDPE
5.2.3 LLDPE
5.2.4 Other
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Market Size Forecast by Applications
6.2.1 Households
6.2.2 Schools
6.2.3 Offices
6.2.4 Market Places
6.2.5 Restaurants
6.2.6 Other
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Can Liner Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Can Liner Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Analysis and Forecast
9.1 Introduction
9.2 North America Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Market Size Forecast by Type
9.6.1 HDPE
9.6.2 LDPE
9.6.3 LLDPE
9.6.4 Other
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Market Size Forecast by Applications
9.10.1 Households
9.10.2 Schools
9.10.3 Offices
9.10.4 Market Places
9.10.5 Restaurants
9.10.6 Other
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Analysis and Forecast
10.1 Introduction
10.2 Europe Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Market Size Forecast by Type
10.6.1 HDPE
10.6.2 LDPE
10.6.3 LLDPE
10.6.4 Other
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Market Size Forecast by Applications
10.10.1 Households
10.10.2 Schools
10.10.3 Offices
10.10.4 Market Places
10.10.5 Restaurants
10.10.6 Other
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Market Size Forecast by Type
11.6.1 HDPE
11.6.2 LDPE
11.6.3 LLDPE
11.6.4 Other
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Market Size Forecast by Applications
11.10.1 Households
11.10.2 Schools
11.10.3 Offices
11.10.4 Market Places
11.10.5 Restaurants
11.10.6 Other
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Analysis and Forecast
12.1 Introduction
12.2 Latin America Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Market Size Forecast by Type
12.6.1 HDPE
12.6.2 LDPE
12.6.3 LLDPE
12.6.4 Other
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Market Size Forecast by Applications
12.10.1 Households
12.10.2 Schools
12.10.3 Offices
12.10.4 Market Places
12.10.5 Restaurants
12.10.6 Other
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Market Size Forecast by Type
13.6.1 HDPE
13.6.2 LDPE
13.6.3 LLDPE
13.6.4 Other
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Market Size Forecast by Applications
13.10.1 Households
13.10.2 Schools
13.10.3 Offices
13.10.4 Market Places
13.10.5 Restaurants
13.10.6 Other
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Can Liner Market: Competitive Dashboard
14.2 Global Can Liner Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Allied Plastics
14.3.2 Berry Plastic Corporation
14.3.3 Clorox Australia
14.3.4 Cosmoplast
14.3.5 Heyuan Ruijian Plastic Products
14.3.6 International Plastics
14.3.7 Kemii Garbage Bag
14.3.8 Luban Pack
14.3.9 Novplasta
14.3.10 S.R.O.
14.3.11 Allied Plastics
