Market Overview:
The global car chassis dyno market is expected to grow at a CAGR of 5.5% during the forecast period from 2018 to 2030. The growth in this market can be attributed to the increasing demand for passenger vehicles and commercial vehicles, and the rising need for efficient testing and development of new vehicle models. The global car chassis dyno market is segmented on the basis of type into single roller type and multi roller type. The single roller type segment is expected to account for a larger share of the global car chassis dyno market in 2018, owing to its low cost and easy installation. However, the multi roller type segment is projected to grow at a higher CAGR during the forecast period, as it offers better performance than single roller types. On the basis of application,the global car chassis dyno market is divided into passenger vehicle and commercial vehicle segments.
Product Definition:
A car chassis dyno is a device used to measure the power output of an engine by measuring the torque and rotational speed of the crankshaft. It can also be used to measure brake horsepower, which is calculated from the torque and rotational speed measurements. This information can be used to improve an engine's performance by adjusting its fuel mixture, ignition timing, or camshaft profile.
Single Roller Type:
Single roller type is used in chassis dyno testing to determine the power and torque output of a vehicle. It is also used as a load factor when determining the performance of an automobile engine. The single roller type Dyno system uses one or more rollers mounted on insulators, which are free to move along with the car’s movement.
Multi Roller Type:
Multi roller type is a mechanism that uses more than one roller to transmit the weight of the engine. The design offers benefits such as low friction, high efficiency, and easy maintenance. In a multi-roller setup there are usually two or more rollers placed in parallel with each other and then connected by means of rods or beams to transfer the weight of the engine from one side to another.
Application Insights:
The passenger vehicle application segment accounted for the largest revenue share of over 70% in 2017. The demand for chassis dynos is high as they offer a cost-effective and efficient way to test drive cars, trucks, and other vehicles. This method helps manufacturers to optimize vehicle performance by identifying weak spots in car designs that require improvement.
Commercial Vehicle Application is expected to be the fastest growing segment with a CAGR of XX% from 2018 to 2030 owing to an increase in demand for commercial vehicles such as buses, trucks among others across various regions including Asia Pacific.
Regional Analysis:
Asia Pacific dominated the global car chassis dyno market in 2017 and is expected to continue its dominance over the forecast period. The region accounted for a share of more than 30% in terms of revenue and is likely to grow at a significant rate over the forecast period. This growth can be attributed to increasing automobile production, especially in China, India, Japan, South Korea and Taiwan.
The Asia Pacific regional market has witnessed an increase in demand for lightweight vehicles with enhanced performance characteristics as well as improved safety features owing to rising disposable income among consumers from developing countries such as India and Thailand. These factors are anticipated to drive product demand across this region during the estimated time span.
Growth Factors:
- Increasing demand for passenger cars and commercial vehicles
- Rising awareness about the benefits of using car chassis dyno
- Technological advancements in car chassis dyno systems
- Growing number of automotive workshops and service centers
- Rising demand for performance-based vehicles
Scope Of The Report
Report Attributes
Report Details
Report Title
Car Chassis Dyno Market Research Report
By Type
Single Roller Type, Multi Roller Type
By Application
Passenger Vehicle, Commercial Vehicle
By Companies
HORIBA, MTS, Meidensha, AVL List, Mustang Dynamometer, Power Test, MAHA, Ono Sokki, Rototest, KRATZER, HORIBA, SNT, Dynapack, SAJ Test
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
247
Number of Tables & Figures
173
Customization Available
Yes, the report can be customized as per your need.
Global Car Chassis Dyno Market Report Segments:
The global Car Chassis Dyno market is segmented on the basis of:
Types
Single Roller Type, Multi Roller Type
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Passenger Vehicle, Commercial Vehicle
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- HORIBA
- MTS
- Meidensha
- AVL List
- Mustang Dynamometer
- Power Test
- MAHA
- Ono Sokki
- Rototest
- KRATZER
- HORIBA
- SNT
- Dynapack
- SAJ Test
Highlights of The Car Chassis Dyno Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Single Roller Type
- Multi Roller Type
- By Application:
- Passenger Vehicle
- Commercial Vehicle
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Car Chassis Dyno Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
A car chassis dyno is a device used to measure the power and torque of a car's engine. It can also be used to determine how efficiently the engine is running.
Some of the major companies in the car chassis dyno market are HORIBA, MTS, Meidensha, AVL List, Mustang Dynamometer, Power Test, MAHA, Ono Sokki, Rototest, KRATZER, HORIBA, SNT, Dynapack, SAJ Test.
The car chassis dyno market is expected to grow at a compound annual growth rate of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Car Chassis Dyno Market Overview 4.1 Introduction 4.1.1 Market Taxonomy 4.1.2 Market Definition 4.1.3 Macro-Economic Factors Impacting the Market Growth 4.2 Car Chassis Dyno Market Dynamics 4.2.1 Market Drivers 4.2.2 Market Restraints 4.2.3 Market Opportunity 4.3 Car Chassis Dyno Market - Supply Chain Analysis 4.3.1 List of Key Suppliers 4.3.2 List of Key Distributors 4.3.3 List of Key Consumers 4.4 Key Forces Shaping the Car Chassis Dyno Market 4.4.1 Bargaining Power of Suppliers 4.4.2 Bargaining Power of Buyers 4.4.3 Threat of Substitution 4.4.4 Threat of New Entrants 4.4.5 Competitive Rivalry 4.5 Global Car Chassis Dyno Market Size & Forecast, 2018-2028 4.5.1 Car Chassis Dyno Market Size and Y-o-Y Growth 4.5.2 Car Chassis Dyno Market Absolute $ Opportunity
Chapter 5 Global Car Chassis Dyno Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Car Chassis Dyno Market Size Forecast by Type
5.2.1 Single Roller Type
5.2.2 Multi Roller Type
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Car Chassis Dyno Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Car Chassis Dyno Market Size Forecast by Applications
6.2.1 Passenger Vehicle
6.2.2 Commercial Vehicle
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Car Chassis Dyno Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Car Chassis Dyno Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Car Chassis Dyno Analysis and Forecast
9.1 Introduction
9.2 North America Car Chassis Dyno Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Car Chassis Dyno Market Size Forecast by Type
9.6.1 Single Roller Type
9.6.2 Multi Roller Type
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Car Chassis Dyno Market Size Forecast by Applications
9.10.1 Passenger Vehicle
9.10.2 Commercial Vehicle
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Car Chassis Dyno Analysis and Forecast
10.1 Introduction
10.2 Europe Car Chassis Dyno Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Car Chassis Dyno Market Size Forecast by Type
10.6.1 Single Roller Type
10.6.2 Multi Roller Type
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Car Chassis Dyno Market Size Forecast by Applications
10.10.1 Passenger Vehicle
10.10.2 Commercial Vehicle
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Car Chassis Dyno Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Car Chassis Dyno Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Car Chassis Dyno Market Size Forecast by Type
11.6.1 Single Roller Type
11.6.2 Multi Roller Type
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Car Chassis Dyno Market Size Forecast by Applications
11.10.1 Passenger Vehicle
11.10.2 Commercial Vehicle
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Car Chassis Dyno Analysis and Forecast
12.1 Introduction
12.2 Latin America Car Chassis Dyno Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Car Chassis Dyno Market Size Forecast by Type
12.6.1 Single Roller Type
12.6.2 Multi Roller Type
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Car Chassis Dyno Market Size Forecast by Applications
12.10.1 Passenger Vehicle
12.10.2 Commercial Vehicle
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Car Chassis Dyno Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Car Chassis Dyno Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Car Chassis Dyno Market Size Forecast by Type
13.6.1 Single Roller Type
13.6.2 Multi Roller Type
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Car Chassis Dyno Market Size Forecast by Applications
13.10.1 Passenger Vehicle
13.10.2 Commercial Vehicle
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Car Chassis Dyno Market: Competitive Dashboard
14.2 Global Car Chassis Dyno Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 HORIBA
14.3.2 MTS
14.3.3 Meidensha
14.3.4 AVL List
14.3.5 Mustang Dynamometer
14.3.6 Power Test
14.3.7 MAHA
14.3.8 Ono Sokki
14.3.9 Rototest
14.3.10 KRATZER
14.3.11 HORIBA
14.3.12 SNT
14.3.13 Dynapack
14.3.14 SAJ Test