Market Overview:
The global carbide tool diamond coating market is expected to grow at a CAGR of 5.5% during the forecast period from 2018 to 2030. The growth in this market can be attributed to the increasing demand for diamond-coated tools in various applications, such as aerospace, manufacturing, and others. Additionally, the growing demand for high-performance tools across different industries is also contributing to the growth of this market.
Product Definition:
Carbide tool diamond coating is a process of coating the surface of carbide tools with diamonds. This helps to improve the wear resistance and cutting performance of the tools.
K01:
K01 is a special type of carbon material that has been developed for use in tool and die manufacturing. It is also used as a coating on carbide tools to improve wear resistance. The growth factor in the coating industry refers to the rate at which new coatings are added to an existing layer or as a new layer added on top of an existing one. Growth factors can be negative (topcoat adding agent dominates over basecoat) or positive (basecoat adds onto the edge).
K10:
K10 is a type of ceramic powder, which has wide usage in coating industry. It can be used as abrasive or heat resistant material. K-series powders are specially designed for use with carbide tools and have low thermal conductivity along with high electrical resistance.
K10 is widely used in metal cutting applications due to it’s wear resistance properties.
Application Insights:
The manufacturing segment dominated the global market in terms of revenue share in 2017. The growth can be attributed to the increasing demand for manufactured products from various end-use industries such as automotive, construction and electrical & electronics among others. Rapid industrialization along with rising living standards has led to an increase in the manufacturing sector which is a key factor driving product demand globally.
Aerospace was the second largest application segment accounting for over 11% of total revenue share in 2017 owing to growing use of these tools on a daily basis during maintenance and repair operations on aircrafts. The coating helps resist abrasion while maintaining high luster and allows easy cleaning using standard solvents without any damage or wear&tear to underlying surfaces which are crucial factors responsible for its increased penetration rate globally over other applications segments.
Regional Analysis:
North America dominated the global market in 2017. The region is expected to witness moderate growth over the forecast period owing to a rise in demand from various end-use industries, such as aerospace and manufacturing. In addition, growing investments by key players for research & development activities are likely to drive product demand over the coming years.
Asia Pacific is anticipated to register significant growth during the forecast period owing to rapid industrialization and increasing foreign investments coupled with government support in emerging economies of India and China among others. Rapidly expanding automotive industry along with rising per capita income levels are also estimated to contribute toward increased product consumption across this region over the next eight years.
Growth Factors:
- Increasing demand for diamond coated tools in the automotive and aerospace industries due to their superior performance over traditional tools.
- Rising demand from the medical industry for applications such as surgical implants and prosthetics that require high precision and durability.
- Growing popularity of diamond coatings among DIY enthusiasts and hobbyists for use in woodworking, metalworking, and other crafts projects.
- Advances in coating technology that have made it possible to apply a thicker layer of diamonds, increasing the tool's lifespan and durability.
- Increased awareness about the benefits of diamond coatings among consumers, which is helping to drive adoption across a wider range of industries
Scope Of The Report
Report Attributes
Report Details
Report Title
Carbide Tool Diamond Coating Market Research Report
By Type
K01, K10, K20, P05, P15, P20, P30, M10, M20, Others
By Application
Aerospace, Manufacturing, Others
By Companies
Oerlikon Corporate, CemeCon, Crystallume, SP3 Diamond Tech
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
193
Number of Tables & Figures
136
Customization Available
Yes, the report can be customized as per your need.
Global Carbide Tool Diamond Coating Market Report Segments:
The global Carbide Tool Diamond Coating market is segmented on the basis of:
Types
K01, K10, K20, P05, P15, P20, P30, M10, M20, Others
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Aerospace, Manufacturing, Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Oerlikon Corporate
- CemeCon
- Crystallume
- SP3 Diamond Tech
Highlights of The Carbide Tool Diamond Coating Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- K01
- K10
- K20
- P05
- P15
- P20
- P30
- M10
- M20
- Others
- By Application:
- Aerospace
- Manufacturing
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Carbide Tool Diamond Coating Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Carbide Tool Diamond Coating is a type of diamond coating that is applied to the tips and cutting edges of tools to increase their lifespan and prevent corrosion.
Some of the major players in the carbide tool diamond coating market are Oerlikon Corporate, CemeCon, Crystallume, SP3 Diamond Tech.
The carbide tool diamond coating market is expected to grow at a compound annual growth rate of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Carbide Tool Diamond Coating Market Overview
4.1 Introduction
4.1.1 Market Taxonomy
4.1.2 Market Definition
4.1.3 Macro-Economic Factors Impacting the Market Growth
4.2 Carbide Tool Diamond Coating Market Dynamics
4.2.1 Market Drivers
4.2.2 Market Restraints
4.2.3 Market Opportunity
4.3 Carbide Tool Diamond Coating Market - Supply Chain Analysis
4.3.1 List of Key Suppliers
4.3.2 List of Key Distributors
4.3.3 List of Key Consumers
4.4 Key Forces Shaping the Carbide Tool Diamond Coating Market
4.4.1 Bargaining Power of Suppliers
4.4.2 Bargaining Power of Buyers
4.4.3 Threat of Substitution
4.4.4 Threat of New Entrants
4.4.5 Competitive Rivalry
4.5 Global Carbide Tool Diamond Coating Market Size & Forecast, 2018-2028
4.5.1 Carbide Tool Diamond Coating Market Size and Y-o-Y Growth
4.5.2 Carbide Tool Diamond Coating Market Absolute $ Opportunity
Chapter 5 Global Carbide Tool Diamond Coating Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Carbide Tool Diamond Coating Market Size Forecast by Type
5.2.1 K01
5.2.2 K10
5.2.3 K20
5.2.4 P05
5.2.5 P15
5.2.6 P20
5.2.7 P30
5.2.8 M10
5.2.9 M20
5.2.10 Others
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Carbide Tool Diamond Coating Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Carbide Tool Diamond Coating Market Size Forecast by Applications
6.2.1 Aerospace
6.2.2 Manufacturing
6.2.3 Others
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Carbide Tool Diamond Coating Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Carbide Tool Diamond Coating Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Carbide Tool Diamond Coating Analysis and Forecast
9.1 Introduction
9.2 North America Carbide Tool Diamond Coating Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Carbide Tool Diamond Coating Market Size Forecast by Type
9.6.1 K01
9.6.2 K10
9.6.3 K20
9.6.4 P05
9.6.5 P15
9.6.6 P20
9.6.7 P30
9.6.8 M10
9.6.9 M20
9.6.10 Others
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Carbide Tool Diamond Coating Market Size Forecast by Applications
9.10.1 Aerospace
9.10.2 Manufacturing
9.10.3 Others
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Carbide Tool Diamond Coating Analysis and Forecast
10.1 Introduction
10.2 Europe Carbide Tool Diamond Coating Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Carbide Tool Diamond Coating Market Size Forecast by Type
10.6.1 K01
10.6.2 K10
10.6.3 K20
10.6.4 P05
10.6.5 P15
10.6.6 P20
10.6.7 P30
10.6.8 M10
10.6.9 M20
10.6.10 Others
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Carbide Tool Diamond Coating Market Size Forecast by Applications
10.10.1 Aerospace
10.10.2 Manufacturing
10.10.3 Others
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Carbide Tool Diamond Coating Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Carbide Tool Diamond Coating Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Carbide Tool Diamond Coating Market Size Forecast by Type
11.6.1 K01
11.6.2 K10
11.6.3 K20
11.6.4 P05
11.6.5 P15
11.6.6 P20
11.6.7 P30
11.6.8 M10
11.6.9 M20
11.6.10 Others
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Carbide Tool Diamond Coating Market Size Forecast by Applications
11.10.1 Aerospace
11.10.2 Manufacturing
11.10.3 Others
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Carbide Tool Diamond Coating Analysis and Forecast
12.1 Introduction
12.2 Latin America Carbide Tool Diamond Coating Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Carbide Tool Diamond Coating Market Size Forecast by Type
12.6.1 K01
12.6.2 K10
12.6.3 K20
12.6.4 P05
12.6.5 P15
12.6.6 P20
12.6.7 P30
12.6.8 M10
12.6.9 M20
12.6.10 Others
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Carbide Tool Diamond Coating Market Size Forecast by Applications
12.10.1 Aerospace
12.10.2 Manufacturing
12.10.3 Others
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Carbide Tool Diamond Coating Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Carbide Tool Diamond Coating Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Carbide Tool Diamond Coating Market Size Forecast by Type
13.6.1 K01
13.6.2 K10
13.6.3 K20
13.6.4 P05
13.6.5 P15
13.6.6 P20
13.6.7 P30
13.6.8 M10
13.6.9 M20
13.6.10 Others
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Carbide Tool Diamond Coating Market Size Forecast by Applications
13.10.1 Aerospace
13.10.2 Manufacturing
13.10.3 Others
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Carbide Tool Diamond Coating Market: Competitive Dashboard
14.2 Global Carbide Tool Diamond Coating Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Oerlikon Corporate
14.3.2 CemeCon
14.3.3 Crystallume
14.3.4 SP3 Diamond Tech
