Market Overview:
The global cast iron interceptors market is expected to grow at a CAGR of 5.5% during the forecast period from 2018 to 2030. The market growth can be attributed to the increasing demand for cast iron interceptors in municipal, building and plant use, and sewage treatment plant use applications. North America is expected to lead the global cast iron interceptors market in terms of revenue during the forecast period, followed by Europe and Asia Pacific.
Product Definition:
Cast iron interceptors are devices used to prevent the discharge of pollutants from a sanitary sewer system into a receiving body of water. They are typically installed in lift stations and at the outfall of a municipal wastewater treatment plant.
Drainage Load Below 10 Gallon:
Drainage load below 10 gallon is the weight of water that can be drained from a full 55-gallon drum through the bottom before it starts to spill over. The higher the number, generally signifies how much water a particular toilet or plumbing fixture can hold.
The drainage load below 10 Gallon is used in cast iron interceivers market as an important factor in selecting correct size of cast iron interceptor for a certain job.
10-40 Gallon:
The 10-40 Gallon is a common size used for cast iron water tanks. It's dimensions are approximately 24 inches in diameter and 40 inches tall.
Therefore, one U.S gallon is equal to 3.78 liters or about 2 cups (8 ounces).
Application Insights:
Building and plant use accounted for the largest revenue share of over 60% in 2017. Cast iron interceptors are widely used in building and plant applications as they are easy to install, maintain, and remove. These products have a low installation cost as well; therefore, they can be easily adopted by existing buildings or new construction projects.
Cast iron sewage treatment plants use an average of 1-2 gallons per day which is less than most plastic pipes that discharge around 10 gallons per day at a rate of 2-4 gpm on average across the U.S., according to data published by the EPA¢â‚¬â„¢s National Center for Biotechnology Information (NCBI). Therefore, these products are expected to find application scope only where municipal systems exist or will soon be built since these systems require large capacity pipes with higher flow rates compared to smaller capacity counterparts owing to their increased requirements regarding water filtration processes carried out within their premises.
Regional Analysis:
North America dominated the global cast iron interceptors market in 2017. The growth of the regional market can be attributed to increasing demand for water and wastewater management, coupled with growing population and rapid urbanization. Moreover, technological advancements related to building energy efficiency are expected to drive product demand over the forecast period.
The Asia Pacific is anticipated to witness significant growth over the forecast period owing to rising construction activities in emerging economies such as China and India owing to regulatory support for infrastructure development along with a large customer base that includes municipal bodies, industries, power plants etc., thereby driving product demand over the projected period.
Growth Factors:
- Increasing demand from municipal and industrial wastewater treatment applications
- Growing awareness about the benefits of using cast iron interceptors over traditional concrete or steel models
- Rising investments in water and wastewater infrastructure projects worldwide
- Proliferation of smart city initiatives that are driving the adoption of advanced wastewater management solutions
- Growing demand for energy-efficient and environment-friendly technologies
Scope Of The Report
Report Attributes
Report Details
Report Title
Cast Iron Interceptors Market Research Report
By Type
Drainage Load Below 10 Gallon, 10-40 Gallon, Above 40 Gallon
By Application
Municipal, Building and Plant Use, Sewage Treatment Plant Use
By Companies
AB&I Foundry, Hebei Zhonghe Foundry Co.,Ltd, Düker, Brett Martin, Zezhou Golden Autumn Foundry (Zezhou Jinqiu), Shanxi Suns Group, Botou Xingrong Zhuguan, Guizhou Xinjin Yuancai, Shanxi Kunyang Pipe Casting, JOSAM
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
220
Number of Tables & Figures
154
Customization Available
Yes, the report can be customized as per your need.
Global Cast Iron Interceptors Market Report Segments:
The global Cast Iron Interceptors market is segmented on the basis of:
Types
Drainage Load Below 10 Gallon, 10-40 Gallon, Above 40 Gallon
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Municipal, Building and Plant Use, Sewage Treatment Plant Use
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- AB&I Foundry
- Hebei Zhonghe Foundry Co.,Ltd
- Düker
- Brett Martin
- Zezhou Golden Autumn Foundry (Zezhou Jinqiu)
- Shanxi Suns Group
- Botou Xingrong Zhuguan
- Guizhou Xinjin Yuancai
- Shanxi Kunyang Pipe Casting
- JOSAM
Highlights of The Cast Iron Interceptors Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Drainage Load Below 10 Gallon
- 10-40 Gallon
- Above 40 Gallon
- By Application:
- Municipal
- Building and Plant Use
- Sewage Treatment Plant Use
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Cast Iron Interceptors Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Cast iron interceptors are a type of air pollution control device that use the heat of the sun to break down pollutants in the atmosphere.
Some of the major companies in the cast iron interceptors market are AB&I Foundry, Hebei Zhonghe Foundry Co.,Ltd, D¼ker, Brett Martin, Zezhou Golden Autumn Foundry (Zezhou Jinqiu), Shanxi Suns Group, Botou Xingrong Zhuguan, Guizhou Xinjin Yuancai, Shanxi Kunyang Pipe Casting, JOSAM.
The cast iron interceptors market is expected to grow at a compound annual growth rate of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Cast Iron Interceptors Market Overview 4.1 Introduction 4.1.1 Market Taxonomy 4.1.2 Market Definition 4.1.3 Macro-Economic Factors Impacting the Market Growth 4.2 Cast Iron Interceptors Market Dynamics 4.2.1 Market Drivers 4.2.2 Market Restraints 4.2.3 Market Opportunity 4.3 Cast Iron Interceptors Market - Supply Chain Analysis 4.3.1 List of Key Suppliers 4.3.2 List of Key Distributors 4.3.3 List of Key Consumers 4.4 Key Forces Shaping the Cast Iron Interceptors Market 4.4.1 Bargaining Power of Suppliers 4.4.2 Bargaining Power of Buyers 4.4.3 Threat of Substitution 4.4.4 Threat of New Entrants 4.4.5 Competitive Rivalry 4.5 Global Cast Iron Interceptors Market Size & Forecast, 2018-2028 4.5.1 Cast Iron Interceptors Market Size and Y-o-Y Growth 4.5.2 Cast Iron Interceptors Market Absolute $ Opportunity
Chapter 5 Global Cast Iron Interceptors Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Cast Iron Interceptors Market Size Forecast by Type
5.2.1 Drainage Load Below 10 Gallon
5.2.2 10-40 Gallon
5.2.3 Above 40 Gallon
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Cast Iron Interceptors Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Cast Iron Interceptors Market Size Forecast by Applications
6.2.1 Municipal
6.2.2 Building and Plant Use
6.2.3 Sewage Treatment Plant Use
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Cast Iron Interceptors Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Cast Iron Interceptors Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Cast Iron Interceptors Analysis and Forecast
9.1 Introduction
9.2 North America Cast Iron Interceptors Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Cast Iron Interceptors Market Size Forecast by Type
9.6.1 Drainage Load Below 10 Gallon
9.6.2 10-40 Gallon
9.6.3 Above 40 Gallon
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Cast Iron Interceptors Market Size Forecast by Applications
9.10.1 Municipal
9.10.2 Building and Plant Use
9.10.3 Sewage Treatment Plant Use
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Cast Iron Interceptors Analysis and Forecast
10.1 Introduction
10.2 Europe Cast Iron Interceptors Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Cast Iron Interceptors Market Size Forecast by Type
10.6.1 Drainage Load Below 10 Gallon
10.6.2 10-40 Gallon
10.6.3 Above 40 Gallon
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Cast Iron Interceptors Market Size Forecast by Applications
10.10.1 Municipal
10.10.2 Building and Plant Use
10.10.3 Sewage Treatment Plant Use
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Cast Iron Interceptors Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Cast Iron Interceptors Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Cast Iron Interceptors Market Size Forecast by Type
11.6.1 Drainage Load Below 10 Gallon
11.6.2 10-40 Gallon
11.6.3 Above 40 Gallon
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Cast Iron Interceptors Market Size Forecast by Applications
11.10.1 Municipal
11.10.2 Building and Plant Use
11.10.3 Sewage Treatment Plant Use
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Cast Iron Interceptors Analysis and Forecast
12.1 Introduction
12.2 Latin America Cast Iron Interceptors Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Cast Iron Interceptors Market Size Forecast by Type
12.6.1 Drainage Load Below 10 Gallon
12.6.2 10-40 Gallon
12.6.3 Above 40 Gallon
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Cast Iron Interceptors Market Size Forecast by Applications
12.10.1 Municipal
12.10.2 Building and Plant Use
12.10.3 Sewage Treatment Plant Use
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Cast Iron Interceptors Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Cast Iron Interceptors Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Cast Iron Interceptors Market Size Forecast by Type
13.6.1 Drainage Load Below 10 Gallon
13.6.2 10-40 Gallon
13.6.3 Above 40 Gallon
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Cast Iron Interceptors Market Size Forecast by Applications
13.10.1 Municipal
13.10.2 Building and Plant Use
13.10.3 Sewage Treatment Plant Use
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Cast Iron Interceptors Market: Competitive Dashboard
14.2 Global Cast Iron Interceptors Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 AB&I Foundry
14.3.2 Hebei Zhonghe Foundry Co.,Ltd
14.3.3 Düker
14.3.4 Brett Martin
14.3.5 Zezhou Golden Autumn Foundry (Zezhou Jinqiu)
14.3.6 Shanxi Suns Group
14.3.7 Botou Xingrong Zhuguan
14.3.8 Guizhou Xinjin Yuancai
14.3.9 Shanxi Kunyang Pipe Casting
14.3.10 JOSAM