Market Overview:
The global CMP polishing fluid market is expected to grow at a CAGR of 5.5% from 2018 to 2030. The growth in the market can be attributed to the increasing demand for semiconductor devices and optical substrates. In terms of type, alumina slurries are expected to dominate the market during the forecast period. This can be attributed to their high polishing efficiency and low cost as compared to other types of slurries. In terms of application, silicon wafers are expected to account for the largest share in 2018 owing to their widespread use in semiconductor devices.
Product Definition:
CMP polishing fluid is a chemical used in the semiconductor industry to remove material from silicon wafers. The importance of CMP polishing fluid is that it allows for precise control over the thickness of the wafer and results in a more consistent product.
Alumina Slurry:
Alumina slurry is a by-product obtained during the purification of alum. It is a highly hydrated, pyrophoric, and non-toxic powder made from aluminum oxide and water. The product finds application in various industries including CMP polishing fluid market which further includes metal plating, electroplating, wood finishing & coating industry among others.
The global alumina slurry market size was valued at USD 856 million in 2016.
Colloidal Silica Slurry:
Colloidal silica slurry is a suspension of particles size less than one micron. It is usually made from sodium silicate and water, but can be produced using other ingredients such as polymers, clay or even sugar. The colloidal particles are coated with a shell of organic polymer to make them hydrophilic so that they will readily absorb the water into their interior.
The absorption of the water results in an increase in volume.
Application Insights:
The other application segment includes semiconductor equipment, superalloys, and automotive components. Optical substrate was the largest application segment in 2017 and is projected to grow at a CAGR of XX% over the forecast period owing to its increasing use in smartphones, tablets, laptops as well as various other electronic products.
The silicon wafer surface is highly polished before being coated with metal layers that act as electrodes during device fabrication processes such as copper interconnections or aluminum layer deposition on top of it.
Regional Analysis:
Asia Pacific dominated the global market in 2017 and is expected to continue its dominance over the forecast period. The growth of this region can be attributed to rising demand for computer memory products from China, India, South Korea, Japan and Taiwan. Growing investments by foreign players such as Micron Technology Inc.; Samsung Electronics Co., Ltd; Hynix Semiconductor Inc.; Intel Corporation; Western Digital Technologies Company Limited; SK Hynix Inc.; Toshiba Memory Corporation; and SanDisk Corp., are anticipated to boost industry expansion over the coming years.
The growing use of computers & laptops coupled with rapid industrialization has led to an increasing demand for polishing fluids across Asia Pacific thereby driving regional market growth. Moreover, increasing production activities in various application sectors such as semiconductors & electronics, aerospace components manufacturing have also positively influenced regional CMP polishing fluid industry expansion.
Growth Factors:
- Increasing demand for semiconductor devices and electronic products
- Growing automotive industry
- Rising investments in the field of optics and photonics
- Proliferation of nanotechnology-based products
- Increasing number of research and development activities
Scope Of The Report
Report Attributes
Report Details
Report Title
CMP Polishing Fluid Market Research Report
By Type
Alumina Slurry, Colloidal Silica Slurry, Ceria Slurries
By Application
Silicon Wafers, Optical Substrate, Disk Drive Components, Other
By Companies
CMC Materials, DuPont, Fujimi Corporation, Merck KGaA(Versum Materials), Fujifilm, Showa Denko Materials, Saint-Gobain, AGC, Ace Nanochem, Ferro (UWiZ Technology), WEC Group, Anjimirco Shanghai, Soulbrain, JSR Micro Korea Material Innovation, KC Tech, SKC
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
176
Number of Tables & Figures
124
Customization Available
Yes, the report can be customized as per your need.
Global CMP Polishing Fluid Market Report Segments:
The global CMP Polishing Fluid market is segmented on the basis of:
Types
Alumina Slurry, Colloidal Silica Slurry, Ceria Slurries
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Silicon Wafers, Optical Substrate, Disk Drive Components, Other
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- CMC Materials
- DuPont
- Fujimi Corporation
- Merck KGaA(Versum Materials)
- Fujifilm
- Showa Denko Materials
- Saint-Gobain
- AGC
- Ace Nanochem
- Ferro (UWiZ Technology)
- WEC Group
- Anjimirco Shanghai
- Soulbrain
- JSR Micro Korea Material Innovation
- KC Tech
- SKC
Highlights of The CMP Polishing Fluid Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Alumina Slurry
- Colloidal Silica Slurry
- Ceria Slurries
- By Application:
- Silicon Wafers
- Optical Substrate
- Disk Drive Components
- Other
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the CMP Polishing Fluid Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
CMP Polishing Fluid is a type of polishing fluid that is used to polish the surface of metal parts. It is composed of water, methanol, and polishing agents.
Some of the major players in the cmp polishing fluid market are CMC Materials, DuPont, Fujimi Corporation, Merck KGaA(Versum Materials), Fujifilm, Showa Denko Materials, Saint-Gobain, AGC, Ace Nanochem, Ferro (UWiZ Technology), WEC Group, Anjimirco Shanghai, Soulbrain, JSR Micro Korea Material Innovation, KC Tech, SKC.
The cmp polishing fluid market is expected to grow at a compound annual growth rate of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 CMP Polishing Fluid Market Overview
4.1 Introduction
4.1.1 Market Taxonomy
4.1.2 Market Definition
4.1.3 Macro-Economic Factors Impacting the Market Growth
4.2 CMP Polishing Fluid Market Dynamics
4.2.1 Market Drivers
4.2.2 Market Restraints
4.2.3 Market Opportunity
4.3 CMP Polishing Fluid Market - Supply Chain Analysis
4.3.1 List of Key Suppliers
4.3.2 List of Key Distributors
4.3.3 List of Key Consumers
4.4 Key Forces Shaping the CMP Polishing Fluid Market
4.4.1 Bargaining Power of Suppliers
4.4.2 Bargaining Power of Buyers
4.4.3 Threat of Substitution
4.4.4 Threat of New Entrants
4.4.5 Competitive Rivalry
4.5 Global CMP Polishing Fluid Market Size & Forecast, 2018-2028
4.5.1 CMP Polishing Fluid Market Size and Y-o-Y Growth
4.5.2 CMP Polishing Fluid Market Absolute $ Opportunity
Chapter 5 Global CMP Polishing Fluid Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 CMP Polishing Fluid Market Size Forecast by Type
5.2.1 Alumina Slurry
5.2.2 Colloidal Silica Slurry
5.2.3 Ceria Slurries
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global CMP Polishing Fluid Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 CMP Polishing Fluid Market Size Forecast by Applications
6.2.1 Silicon Wafers
6.2.2 Optical Substrate
6.2.3 Disk Drive Components
6.2.4 Other
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global CMP Polishing Fluid Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 CMP Polishing Fluid Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America CMP Polishing Fluid Analysis and Forecast
9.1 Introduction
9.2 North America CMP Polishing Fluid Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America CMP Polishing Fluid Market Size Forecast by Type
9.6.1 Alumina Slurry
9.6.2 Colloidal Silica Slurry
9.6.3 Ceria Slurries
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America CMP Polishing Fluid Market Size Forecast by Applications
9.10.1 Silicon Wafers
9.10.2 Optical Substrate
9.10.3 Disk Drive Components
9.10.4 Other
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe CMP Polishing Fluid Analysis and Forecast
10.1 Introduction
10.2 Europe CMP Polishing Fluid Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe CMP Polishing Fluid Market Size Forecast by Type
10.6.1 Alumina Slurry
10.6.2 Colloidal Silica Slurry
10.6.3 Ceria Slurries
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe CMP Polishing Fluid Market Size Forecast by Applications
10.10.1 Silicon Wafers
10.10.2 Optical Substrate
10.10.3 Disk Drive Components
10.10.4 Other
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific CMP Polishing Fluid Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific CMP Polishing Fluid Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific CMP Polishing Fluid Market Size Forecast by Type
11.6.1 Alumina Slurry
11.6.2 Colloidal Silica Slurry
11.6.3 Ceria Slurries
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific CMP Polishing Fluid Market Size Forecast by Applications
11.10.1 Silicon Wafers
11.10.2 Optical Substrate
11.10.3 Disk Drive Components
11.10.4 Other
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America CMP Polishing Fluid Analysis and Forecast
12.1 Introduction
12.2 Latin America CMP Polishing Fluid Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America CMP Polishing Fluid Market Size Forecast by Type
12.6.1 Alumina Slurry
12.6.2 Colloidal Silica Slurry
12.6.3 Ceria Slurries
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America CMP Polishing Fluid Market Size Forecast by Applications
12.10.1 Silicon Wafers
12.10.2 Optical Substrate
12.10.3 Disk Drive Components
12.10.4 Other
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) CMP Polishing Fluid Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) CMP Polishing Fluid Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) CMP Polishing Fluid Market Size Forecast by Type
13.6.1 Alumina Slurry
13.6.2 Colloidal Silica Slurry
13.6.3 Ceria Slurries
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) CMP Polishing Fluid Market Size Forecast by Applications
13.10.1 Silicon Wafers
13.10.2 Optical Substrate
13.10.3 Disk Drive Components
13.10.4 Other
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 CMP Polishing Fluid Market: Competitive Dashboard
14.2 Global CMP Polishing Fluid Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 CMC Materials
14.3.2 DuPont
14.3.3 Fujimi Corporation
14.3.4 Merck KGaA(Versum Materials)
14.3.5 Fujifilm
14.3.6 Showa Denko Materials
14.3.7 Saint-Gobain
14.3.8 AGC
14.3.9 Ace Nanochem
14.3.10 Ferro (UWiZ Technology)
14.3.11 WEC Group
14.3.12 Anjimirco Shanghai
14.3.13 Soulbrain
14.3.14 JSR Micro Korea Material Innovation
14.3.15 KC Tech
14.3.16 SKC
