Market Overview:
The global co-injection molding machine market is expected to grow at a CAGR of 5.8% during the forecast period from 2018 to 2030. The growth in the market can be attributed to the increasing demand for co-injection molded products from various end-use industries, such as automotive, electronics, and consumer goods. In addition, the growing demand for lightweight and fuel-efficient vehicles is also contributing to the growth of the global co-injection molding machine market. Based on type, manual injection molding machines accounted for a major share of the global co-injection molding machine market in 2017. However, semi-automatic injection molding machines are expected to grow at a higher CAGR during the forecast period owing to their ability to produce high quality products with low cycle times.
Product Definition:
A co-injection molding machine is a type of injection molding machine that is used to produce plastic parts. Co-injection molding machines are important because they allow manufacturers to produce complex plastic parts in a single step.
Manual:
Manual injection molding machine is a device that injects molten plastic into a mold cavity at the required rate. The molten plastic is then cooled to create an article of manufacture. Manual injection molding machines are easy to operate and cheaper as compared to automatic ones, which makes them suitable for small scale industries or home based businesses with less investment requirements.
Advantages of manual injection molding machines over their counterparts include high flexibility in terms of production quantities.
Semi-automatic:
Semi-automatic injection molding machine is a type of injection molding machine that requires operator's intervention during the entire process. The semi-automatic machines are equipped with features such as programmable memory, speed and cycle control, and automatic part detection to ensure high quality parts. Semi-automated machines are used for small production runs where human inspection is sufficient to detect problems before they occur.
Application Insights:
The global demand for injection molding machines is categorized on the basis of application into automobile, electronics, consumer goods, machine manufacturing and other applications. The automotive segment held the largest market share in 2017 owing to increasing production of passenger cars and light commercial vehicles across the globe. In addition, favorable government policies promoting electric vehicle production are expected to drive demand over the forecast period.
Consumer goods was another major application segment in 2017 due to high product penetration for manufacturing toys & sporting goods as well as home appliances among other products such as electronic components and medical devices. Increasing use of plastics in these appliances is expected to further drive growth over the forecast period.
Regional Analysis:
Asia Pacific dominated the global market in 2017 and is expected to continue its dominance over the forecast period. The region has witnessed a surge in demand for injection molding machines from various end-use industries, such as consumer goods, automotive, electronics and others. This can be attributed to increasing production of automobiles across key markets including China and India. In addition, rising disposable income levels coupled with expanding population will drive further growth across this region during the forecast period.
The Asia Pacific was followed by Europe which accounted for a revenue share of more than 20% in 2017 owing to high demand from several major end-use industries operating within this region. The presence of major automobile manufacturers including Volkswagen AG; BMW Group; Daimler AG; Mercedes Benz AMB BVAGA GMBH & CO.; AUDI AG; SEAT PLC.; FERRARI SPA rights owner are contributing towards increased product adoption across this region during the same year.
Growth Factors:
- Increasing demand for lightweight and fuel-efficient vehicles
- Growing automotive industry in developing countries
- Rising demand for plastic components in automobiles
- Technological advancements in co-injection molding machines
- Growing trend of customization and personalization in the automotive industry
Scope Of The Report
Report Attributes
Report Details
Report Title
Co-Injection Molding Machine Market Research Report
By Type
Manual, Semi-automatic, Automatic
By Application
Automobile, Electronics, Consumer Goods, Machine Manufacturing, Others
By Companies
Moldex3D, Milacron, Amcor, Greiner Packaging, Plastics U, Kortec, Taroko, MASPI srl, RJG Inc, China Plastic Injection Molding, Moldex3D, En-Plas Inc., AIM Processing, Eagle Mold Co., Inc, Plastics Molding Company
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
213
Number of Tables & Figures
150
Customization Available
Yes, the report can be customized as per your need.
Global Co-Injection Molding Machine Market Report Segments:
The global Co-Injection Molding Machine market is segmented on the basis of:
Types
Manual, Semi-automatic, Automatic
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Automobile, Electronics, Consumer Goods, Machine Manufacturing, Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Moldex3D
- Milacron
- Amcor
- Greiner Packaging
- Plastics U
- Kortec
- Taroko
- MASPI srl
- RJG Inc
- China Plastic Injection Molding
- Moldex3D
- En-Plas Inc.
- AIM Processing
- Eagle Mold Co., Inc
- Plastics Molding Company
Highlights of The Co-Injection Molding Machine Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Manual
- Semi-automatic
- Automatic
- By Application:
- Automobile
- Electronics
- Consumer Goods
- Machine Manufacturing
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Co-Injection Molding Machine Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
A co-injection molding machine is a type of injection molding machine that uses two nozzles to inject the plastic material. This process allows for more accurate and consistent parts, as well as faster production times.
Some of the major players in the co-injection molding machine market are Moldex3D, Milacron, Amcor, Greiner Packaging, Plastics U, Kortec, Taroko, MASPI srl, RJG Inc, China Plastic Injection Molding, Moldex3D, En-Plas Inc., AIM Processing, Eagle Mold Co., Inc, Plastics Molding Company.
The co-injection molding machine market is expected to grow at a compound annual growth rate of 5.8%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Co-Injection Molding Machine Market Overview
4.1 Introduction
4.1.1 Market Taxonomy
4.1.2 Market Definition
4.1.3 Macro-Economic Factors Impacting the Market Growth
4.2 Co-Injection Molding Machine Market Dynamics
4.2.1 Market Drivers
4.2.2 Market Restraints
4.2.3 Market Opportunity
4.3 Co-Injection Molding Machine Market - Supply Chain Analysis
4.3.1 List of Key Suppliers
4.3.2 List of Key Distributors
4.3.3 List of Key Consumers
4.4 Key Forces Shaping the Co-Injection Molding Machine Market
4.4.1 Bargaining Power of Suppliers
4.4.2 Bargaining Power of Buyers
4.4.3 Threat of Substitution
4.4.4 Threat of New Entrants
4.4.5 Competitive Rivalry
4.5 Global Co-Injection Molding Machine Market Size & Forecast, 2018-2028
4.5.1 Co-Injection Molding Machine Market Size and Y-o-Y Growth
4.5.2 Co-Injection Molding Machine Market Absolute $ Opportunity
Chapter 5 Global Co-Injection Molding Machine Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Co-Injection Molding Machine Market Size Forecast by Type
5.2.1 Manual
5.2.2 Semi-automatic
5.2.3 Automatic
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Co-Injection Molding Machine Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Co-Injection Molding Machine Market Size Forecast by Applications
6.2.1 Automobile
6.2.2 Electronics
6.2.3 Consumer Goods
6.2.4 Machine Manufacturing
6.2.5 Others
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Co-Injection Molding Machine Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Co-Injection Molding Machine Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Co-Injection Molding Machine Analysis and Forecast
9.1 Introduction
9.2 North America Co-Injection Molding Machine Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Co-Injection Molding Machine Market Size Forecast by Type
9.6.1 Manual
9.6.2 Semi-automatic
9.6.3 Automatic
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Co-Injection Molding Machine Market Size Forecast by Applications
9.10.1 Automobile
9.10.2 Electronics
9.10.3 Consumer Goods
9.10.4 Machine Manufacturing
9.10.5 Others
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Co-Injection Molding Machine Analysis and Forecast
10.1 Introduction
10.2 Europe Co-Injection Molding Machine Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Co-Injection Molding Machine Market Size Forecast by Type
10.6.1 Manual
10.6.2 Semi-automatic
10.6.3 Automatic
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Co-Injection Molding Machine Market Size Forecast by Applications
10.10.1 Automobile
10.10.2 Electronics
10.10.3 Consumer Goods
10.10.4 Machine Manufacturing
10.10.5 Others
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Co-Injection Molding Machine Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Co-Injection Molding Machine Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Co-Injection Molding Machine Market Size Forecast by Type
11.6.1 Manual
11.6.2 Semi-automatic
11.6.3 Automatic
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Co-Injection Molding Machine Market Size Forecast by Applications
11.10.1 Automobile
11.10.2 Electronics
11.10.3 Consumer Goods
11.10.4 Machine Manufacturing
11.10.5 Others
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Co-Injection Molding Machine Analysis and Forecast
12.1 Introduction
12.2 Latin America Co-Injection Molding Machine Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Co-Injection Molding Machine Market Size Forecast by Type
12.6.1 Manual
12.6.2 Semi-automatic
12.6.3 Automatic
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Co-Injection Molding Machine Market Size Forecast by Applications
12.10.1 Automobile
12.10.2 Electronics
12.10.3 Consumer Goods
12.10.4 Machine Manufacturing
12.10.5 Others
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Co-Injection Molding Machine Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Co-Injection Molding Machine Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Co-Injection Molding Machine Market Size Forecast by Type
13.6.1 Manual
13.6.2 Semi-automatic
13.6.3 Automatic
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Co-Injection Molding Machine Market Size Forecast by Applications
13.10.1 Automobile
13.10.2 Electronics
13.10.3 Consumer Goods
13.10.4 Machine Manufacturing
13.10.5 Others
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Co-Injection Molding Machine Market: Competitive Dashboard
14.2 Global Co-Injection Molding Machine Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Moldex3D
14.3.2 Milacron
14.3.3 Amcor
14.3.4 Greiner Packaging
14.3.5 Plastics U
14.3.6 Kortec
14.3.7 Taroko
14.3.8 MASPI srl
14.3.9 RJG Inc
14.3.10 China Plastic Injection Molding
14.3.11 Moldex3D
14.3.12 En-Plas Inc.
14.3.13 AIM Processing
14.3.14 Eagle Mold Co., Inc
14.3.15 Plastics Molding Company
