Market Overview:
The global cold-end exhaust system market is estimated to be valued at US$ XX Mn in 2018 and is projected to reach US$ XX Mn by 2030, exhibiting a CAGR of X.X%. The growth of the market can be attributed to the increasing demand for automobiles and rising awareness about vehicular emissions. The global cold-end exhaust system market has been segmented on the basis of type, application, and region. On the basis of type, the market has been divided into basic and performance segments. The basic segment is expected to account for a larger share of the global cold-end exhaust system market during the forecast period owing to its low cost as compared to performance systems.
Product Definition:
The cold-end exhaust system is the part of the engine that expels exhaust gases from the engine. The importance of a cold-end exhaust system is that it helps to keep the engine running cooler, which can improve performance and fuel economy.
Basic:
The global basic is expected to grow at a CAGR of XX% from 2017 to 2024. The growth can be attributed to the increasing demand for natural gas across various sectors such as power generation, transportation and manufacturing. Also, the growing adoption of clean energy sources in various countries will drive market growth over the forecast period.
Basic is used in exhaust systems that are installed at both ends of a gas turbine or an oil & gas compressor station.
Performance:
The performance of the cold-end exhaust system is measured by its ability to remove heat from the engine bay and exhaust out into the atmosphere. The system’s main components include a catalytic converter, muffler, tailpipe, and an exit pipe. Heat removal from an internal combustion engine is crucial in order to maintain optimum operating temperature of various components such as crankshaft or piston within a cylinder or motor within a drivetrain.
Application Insights:
Automotive application segment led the global cold-end exhaust system market in 2017, accounting for over 60.0% share of the overall revenue. The automotive industry is one of the largest consumers of various components, including electronic devices and sensors, engine parts and accessories, body electronics parts and panels among others. These components need to be thermally coupled with the exterior surfaces of a vehicle to provide sufficient heat dissipation for maintaining low interior temperatures inside vehicles during winter months in regions where snowfall frequently occurs.
The use of cold-end exhaust systems helps reduce heat build-up inside vehicles by providing an effective thermal path from an exhaust gas temperature near 300°C to a cooler environment outside vehicle doors or passenger cars (whereby air flow rate through these openings can be regulated).
Regional Analysis:
Asia Pacific dominated the global market in 2017 and is expected to continue its dominance over the forecast period. The region is home to some of the largest automotive markets such as China, India, Japan, and South Korea. Increasing automobile production around the world has led to an increase in demand for cold-end exhaust systems across various applications.
The European market accounted for a significant share of global revenue in 2017 owing to high product adoption by end-users from various industries including oil & gas, power generation, petrochemical & chemicals among others. North America also captured a significant revenue share due to high product penetration by OEMs across all major vehicle segments including passenger cars and commercial vehicles (trucks). However, strict emission norms coupled with rising R&D activities are expected drive CEMS demand over the next eight years.
Growth Factors:
- Increasing demand for automobiles
- Growing population and rising income levels in developing countries
- Stringent emission norms by regulatory authorities
- Technological advancements in cold-end exhaust systems
- Increasing adoption of eco-friendly technologies
Scope Of The Report
Report Attributes
Report Details
Report Title
Cold-end Exhaust System Market Research Report
By Type
Basic, Performance
By Application
Automobile Industry, Others
By Companies
Magnaflow, Flowmaster, Bosal, Calsonic Kansei, EberspäCher Exhaust Aftermarket, Magneti Marelli, Tenneco, Magnaflow
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
174
Number of Tables & Figures
122
Customization Available
Yes, the report can be customized as per your need.
Global Cold-end Exhaust System Market Report Segments:
The global Cold-end Exhaust System market is segmented on the basis of:
Types
Basic, Performance
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Automobile Industry, Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Magnaflow
- Flowmaster
- Bosal
- Calsonic Kansei
- EberspäCher Exhaust Aftermarket
- Magneti Marelli
- Tenneco
- Magnaflow
Highlights of The Cold-end Exhaust System Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Basic
- Performance
- By Application:
- Automobile Industry
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Cold-end Exhaust System Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
A cold-end exhaust system is a type of exhaust system that uses the heat from the engine to dissipate heat away from the vehicle's hot end. This can reduce or eliminate the need for an external fan to be used to cool down the engine.
Some of the major companies in the cold-end exhaust system market are Magnaflow, Flowmaster, Bosal, Calsonic Kansei, Ebersp¤Cher Exhaust Aftermarket, Magneti Marelli, Tenneco, Magnaflow.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Cold-end Exhaust System Market Overview
4.1 Introduction
4.1.1 Market Taxonomy
4.1.2 Market Definition
4.1.3 Macro-Economic Factors Impacting the Market Growth
4.2 Cold-end Exhaust System Market Dynamics
4.2.1 Market Drivers
4.2.2 Market Restraints
4.2.3 Market Opportunity
4.3 Cold-end Exhaust System Market - Supply Chain Analysis
4.3.1 List of Key Suppliers
4.3.2 List of Key Distributors
4.3.3 List of Key Consumers
4.4 Key Forces Shaping the Cold-end Exhaust System Market
4.4.1 Bargaining Power of Suppliers
4.4.2 Bargaining Power of Buyers
4.4.3 Threat of Substitution
4.4.4 Threat of New Entrants
4.4.5 Competitive Rivalry
4.5 Global Cold-end Exhaust System Market Size & Forecast, 2020-2028
4.5.1 Cold-end Exhaust System Market Size and Y-o-Y Growth
4.5.2 Cold-end Exhaust System Market Absolute $ Opportunity
Chapter 5 Global Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Market Size Forecast by Type
5.2.1 Basic
5.2.2 Performance
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Market Size Forecast by Applications
6.2.1 Automobile Industry
6.2.2 Others
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Cold-end Exhaust System Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Cold-end Exhaust System Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Analysis and Forecast
9.1 Introduction
9.2 North America Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Market Size Forecast by Type
9.6.1 Basic
9.6.2 Performance
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Market Size Forecast by Applications
9.10.1 Automobile Industry
9.10.2 Others
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Analysis and Forecast
10.1 Introduction
10.2 Europe Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Market Size Forecast by Type
10.6.1 Basic
10.6.2 Performance
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Market Size Forecast by Applications
10.10.1 Automobile Industry
10.10.2 Others
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Market Size Forecast by Type
11.6.1 Basic
11.6.2 Performance
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Market Size Forecast by Applications
11.10.1 Automobile Industry
11.10.2 Others
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Analysis and Forecast
12.1 Introduction
12.2 Latin America Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Market Size Forecast by Type
12.6.1 Basic
12.6.2 Performance
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Market Size Forecast by Applications
12.10.1 Automobile Industry
12.10.2 Others
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Market Size Forecast by Type
13.6.1 Basic
13.6.2 Performance
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Market Size Forecast by Applications
13.10.1 Automobile Industry
13.10.2 Others
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Cold-end Exhaust System Market: Competitive Dashboard
14.2 Global Cold-end Exhaust System Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Magnaflow
14.3.2 Flowmaster
14.3.3 Bosal
14.3.4 Calsonic Kansei
14.3.5 EberspäCher Exhaust Aftermarket
14.3.6 Magneti Marelli
14.3.7 Tenneco
14.3.8 Magnaflow
