Market Overview:
The global common-rail injection EFI engine market is estimated to be valued at US$ XX Mn in 2018 and is projected to reach US$ XX Mn by 2030, exhibiting a CAGR of X.X%. The growth of the market can be attributed to the increasing demand for fuel-efficient and low emission engines across the globe. The global common-rail injection EFI engine market has been segmented on the basis of type, application, and region. On the basis of type, SDI engines are expected to account for a larger share than TDI engines during the forecast period. However, TDI engines are projected to exhibit a higher CAGR as compared to SDI engines during 2018–2030 owing to their growing popularity in passenger cars and commercial vehicles. On the basis of application, automotive is expected to account for a larger share than construction & agriculture machinery and other segments during 2018–2030.
Product Definition:
A common-rail injection engine is a fuel injection engine that uses a single, common fuel rail to deliver fuel to all cylinders. The purpose of the common-rail system is to maintain more consistent pressure and better atomization of the injected fuel. This results in improved combustion and reduced emissions.
SDI:
Single cylinder, Multiple Cylinder, Flat or V-shaped combustion is known as SDI (Sequential dual injection) combustion technology. It was developed by General Motors in the early eighties and patented in the U.S. & Europe in 1988 and 1989 respectively.
TDI:
TDI (Time-Dependent Injection) is an electronic fuel injection system that controls the amount of fuel entering an engine. It works on the basis of time delay mechanism. The longer the period, more will be injected into the combustion chamber and at a constant rate too.
The longer TDI period provides more time for vaporization of gasoline which results in increased efficiency as well as power output from engines with common rail systems.
Application Insights:
Automotive was the largest application segment in 2017 and is expected to continue its dominance over the forecast period. The growing demand for fuel-efficient vehicles, coupled with government initiatives regarding reduction of vehicular emissions, is anticipated to drive the global common-rail injection EFI engine market over the forecast period.
The construction and agriculture machinery segment accounted for a share of 11.9% in terms of revenue in 2017 on account of high fuel consumption due to heavy load carrying capacity requirements from these applications. Common rail injectors are used across multiple segments owing to their ability to deliver precise amounts of fuel at desired times which further aids their adoption across various industries including construction & agriculture machinery as well as automotive applications globally.
Other major applications include marine engines and power sports equipment such as dirt bikes.
Regional Analysis:
Europe dominated the global common-rail injection EFI engine market in terms of revenue share in 2017. The region is expected to continue its dominance over the forecast period, with Germany and France being the key markets. Asia Pacific is anticipated to witness significant growth over the coming years owing to increasing automobile production coupled with rising disposable income levels of consumers. Moreover, supportive government regulations are also likely to contribute towards regional growth over the next eight years.
The U.S., Mexico, Canada are some of the major countries that make up North America’s industrial machinery industry which has been witnessing steady growth since past few years on account of increasing demand from various end users such as agriculture & food processing industries and construction sector across all regions including developed Europe and developing economies such as Brazil, Argentina etc.
Growth Factors:
- Increasing demand for fuel-efficient and low-emission vehicles
- Stringent emission norms by regulatory authorities across the globe
- Development of advanced common-rail injection systems with better performance and fuel economy
- Growing popularity of diesel engines in passenger cars and light commercial vehicles
- Rising demand for alternative fuels such as CNG, LPG, etc., to reduce emissions
Scope Of The Report
Report Attributes
Report Details
Report Title
Common-rail Injection EFI Engine Market Research Report
By Type
SDI, TDI
By Application
Automotive, Construction & Agriculture Machinery, Other
By Companies
Bosch, Denso, Delphi, Continental, Woodward, Cummins, XF Technology, Byc Electronic Control, Liebherr
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
144
Number of Tables & Figures
101
Customization Available
Yes, the report can be customized as per your need.
Global Common-rail Injection EFI Engine Market Report Segments:
The global Common-rail Injection EFI Engine market is segmented on the basis of:
Types
SDI, TDI
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Automotive, Construction & Agriculture Machinery, Other
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Bosch
- Denso
- Delphi
- Continental
- Woodward
- Cummins
- XF Technology
- Byc Electronic Control
- Liebherr
Highlights of The Common-rail Injection EFI Engine Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- SDI
- TDI
- By Application:
- Automotive
- Construction & Agriculture Machinery
- Other
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Common-rail Injection EFI Engine Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Common rail injection is a type of fuel injection system used in diesel engines. It was first developed by Bosch and has become the most common type of fuel injection system in use today.
Some of the major companies in the common-rail injection efi engine market are Bosch, Denso, Delphi, Continental, Woodward, Cummins, XF Technology, Byc Electronic Control, Liebherr.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Common-rail Injection EFI Engine Market Overview
4.1 Introduction
4.1.1 Market Taxonomy
4.1.2 Market Definition
4.1.3 Macro-Economic Factors Impacting the Market Growth
4.2 Common-rail Injection EFI Engine Market Dynamics
4.2.1 Market Drivers
4.2.2 Market Restraints
4.2.3 Market Opportunity
4.3 Common-rail Injection EFI Engine Market - Supply Chain Analysis
4.3.1 List of Key Suppliers
4.3.2 List of Key Distributors
4.3.3 List of Key Consumers
4.4 Key Forces Shaping the Common-rail Injection EFI Engine Market
4.4.1 Bargaining Power of Suppliers
4.4.2 Bargaining Power of Buyers
4.4.3 Threat of Substitution
4.4.4 Threat of New Entrants
4.4.5 Competitive Rivalry
4.5 Global Common-rail Injection EFI Engine Market Size & Forecast, 2018-2028
4.5.1 Common-rail Injection EFI Engine Market Size and Y-o-Y Growth
4.5.2 Common-rail Injection EFI Engine Market Absolute $ Opportunity
Chapter 5 Global Common-rail Injection EFI Engine Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Common-rail Injection EFI Engine Market Size Forecast by Type
5.2.1 SDI
5.2.2 TDI
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Common-rail Injection EFI Engine Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Common-rail Injection EFI Engine Market Size Forecast by Applications
6.2.1 Automotive
6.2.2 Construction & Agriculture Machinery
6.2.3 Other
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Common-rail Injection EFI Engine Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Common-rail Injection EFI Engine Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Common-rail Injection EFI Engine Analysis and Forecast
9.1 Introduction
9.2 North America Common-rail Injection EFI Engine Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Common-rail Injection EFI Engine Market Size Forecast by Type
9.6.1 SDI
9.6.2 TDI
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Common-rail Injection EFI Engine Market Size Forecast by Applications
9.10.1 Automotive
9.10.2 Construction & Agriculture Machinery
9.10.3 Other
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Common-rail Injection EFI Engine Analysis and Forecast
10.1 Introduction
10.2 Europe Common-rail Injection EFI Engine Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Common-rail Injection EFI Engine Market Size Forecast by Type
10.6.1 SDI
10.6.2 TDI
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Common-rail Injection EFI Engine Market Size Forecast by Applications
10.10.1 Automotive
10.10.2 Construction & Agriculture Machinery
10.10.3 Other
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Common-rail Injection EFI Engine Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Common-rail Injection EFI Engine Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Common-rail Injection EFI Engine Market Size Forecast by Type
11.6.1 SDI
11.6.2 TDI
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Common-rail Injection EFI Engine Market Size Forecast by Applications
11.10.1 Automotive
11.10.2 Construction & Agriculture Machinery
11.10.3 Other
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Common-rail Injection EFI Engine Analysis and Forecast
12.1 Introduction
12.2 Latin America Common-rail Injection EFI Engine Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Common-rail Injection EFI Engine Market Size Forecast by Type
12.6.1 SDI
12.6.2 TDI
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Common-rail Injection EFI Engine Market Size Forecast by Applications
12.10.1 Automotive
12.10.2 Construction & Agriculture Machinery
12.10.3 Other
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Common-rail Injection EFI Engine Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Common-rail Injection EFI Engine Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Common-rail Injection EFI Engine Market Size Forecast by Type
13.6.1 SDI
13.6.2 TDI
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Common-rail Injection EFI Engine Market Size Forecast by Applications
13.10.1 Automotive
13.10.2 Construction & Agriculture Machinery
13.10.3 Other
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Common-rail Injection EFI Engine Market: Competitive Dashboard
14.2 Global Common-rail Injection EFI Engine Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Bosch
14.3.2 Denso
14.3.3 Delphi
14.3.4 Continental
14.3.5 Woodward
14.3.6 Cummins
14.3.7 XF Technology
14.3.8 Byc Electronic Control
14.3.9 Liebherr
