Market Overview:
The global compressed air treatment system market is expected to grow at a CAGR of 5.5% during the forecast period from 2018 to 2030. The market growth can be attributed to the increasing demand for compressed air in various industries such as chemical, papermaking, medical, food industry, electronics and others. Additionally, the growing awareness about energy-efficient compressed air treatment systems is also propelling the growth of this market. On the basis of type, dryers are expected to hold a major share of the global compressed air treatment system market during the forecast period. This can be attributed to their ability to remove moisture from compressed air and improve its quality.
Product Definition:
A compressed air treatment system is a device or set of devices used to clean and purify compressed air. Compressed air treatment systems are important because they remove contaminants from the compressed air, which can cause damage to equipment and reduce the life of components.
Dryers:
Dryers are used to reduce the moisture content in compressed air. It is an important tool for any compressed air treatment system as it helps remove water vapor and other contaminants that could be harmful to the sensitive electronics if they were allowed into a downstream system. The growth factor for dryers has been increased awareness regarding their benefits, which has led to increased sales of these devices over the past few years.
Filters:
Filters and it's usage in the compressed air treatment system market is a device or assembly of devices used to reduce particulate matter, dust, and other harmful contaminants from entering into the gas stream.
Application Insights:
The market is segmented on the basis of application into chemical industry, papermaking, medical, food processing and electronics industries. The chemical industry held the largest share in 2017. This can be attributed to growing demand for chemicals across various end-use industries worldwide.
Chemical manufacturers face a lot of pressure during manufacturing processes such as drying or evaporation since these processes require high purity products with low moisture content and other impurities removed from them. Compressed air treatment systems are used in several applications within the chemical industry including process cooling & heat exchangers, material handling equipment and storage tanks among others to improve their efficiency and productivity by reducing energy consumption along with operating costs which eventually benefits the overall profitability of an operationally efficient plant over a long term period of time.
Regional Analysis:
Asia Pacific dominated the global market in 2017 and is expected to continue its dominance over the forecast period. The growth can be attributed to rapid industrialization, increasing population, and rising disposable income. In addition, favorable government policies such as “Make in India†initiative by the Indian government are expected to create ample opportunities for foreign investors.
The Middle East & Africa region is anticipated to witness significant growth over the forecast period owing to various factors such as low cost of compressed air treatment system compared with other regions along with high energy efficiency offered by aftercoolers and dryers. Moreover, growing oil & gas industry due to increasing demand from domestic consumers will drive regional market growth during the forecast period.
Europe was estimated at USD X million in 2017.
Growth Factors:
- Increasing demand for compressed air treatment systems from the automotive and transportation sector due to the increasing production of vehicles.
- Growing demand for compressed air treatment systems in the food and beverage industry due to stringent hygiene regulations.
- Rising demand for compressed air treatment systems in the pharmaceuticals industry due to growing need for clean and sterile compressed air.
- Increasing investments in manufacturing sector across different regions of the world which is expected to drive growth of the global compressed air treatment system market over the forecast period.
Scope Of The Report
Report Attributes
Report Details
Report Title
Compressed Air Treatment System Market Research Report
By Type
Dryers, Filters, Aftercoolers, Others
By Application
Chemical Industry, Papermaking, Medical, Food Industry, Electronics, Others
By Companies
Atlas Copco, Parker, Ingersoll Rand, Kaeser, Pneumatech, Gardner Denver, ALUP Compressors, VPC, General Air Products, Champion, BOGE, GTEC, Werther International, BEKO TECHNOLOGIES, Sullair (Hitachi), SPX FLOW, Ceccato, Fini, Great Lakes Air, Denair Energy Saving Technology (Shanghai), Xebec, Shanghai Xin Ran Compressor, Hangzhou Huilan Gas Equipment, DEGARE, Wuxi Hanying Machinery Manufacture, Langqi Compression Machinery (Shanghai)
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
201
Number of Tables & Figures
141
Customization Available
Yes, the report can be customized as per your need.
Global Compressed Air Treatment System Market Report Segments:
The global Compressed Air Treatment System market is segmented on the basis of:
Types
Dryers, Filters, Aftercoolers, Others
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Chemical Industry, Papermaking, Medical, Food Industry, Electronics, Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Atlas Copco
- Parker
- Ingersoll Rand
- Kaeser
- Pneumatech
- Gardner Denver
- ALUP Compressors
- VPC
- General Air Products
- Champion
- BOGE
- GTEC
- Werther International
- BEKO TECHNOLOGIES
- Sullair (Hitachi)
- SPX FLOW
- Ceccato
- Fini
- Great Lakes Air
- Denair Energy Saving Technology (Shanghai)
- Xebec
- Shanghai Xin Ran Compressor
- Hangzhou Huilan Gas Equipment
- DEGARE
- Wuxi Hanying Machinery Manufacture
- Langqi Compression Machinery (Shanghai)
Highlights of The Compressed Air Treatment System Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Dryers
- Filters
- Aftercoolers
- Others
- By Application:
- Chemical Industry
- Papermaking
- Medical
- Food Industry
- Electronics
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Compressed Air Treatment System Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
A compressed air treatment system (CATS) is a technology used to clean and sanitize indoor spaces by using compressed air. The system uses an air compressor to create high-pressure, oxygen-rich gas that is then dispersed through the building's ventilation systems. This process helps to kill bacteria and other microorganisms in the air, while also removing odors and pollutants.
Some of the major players in the compressed air treatment system market are Atlas Copco, Parker, Ingersoll Rand, Kaeser, Pneumatech, Gardner Denver, ALUP Compressors, VPC, General Air Products, Champion, BOGE, GTEC, Werther International, BEKO TECHNOLOGIES, Sullair (Hitachi), SPX FLOW, Ceccato, Fini, Great Lakes Air, Denair Energy Saving Technology (Shanghai), Xebec, Shanghai Xin Ran Compressor, Hangzhou Huilan Gas Equipment, DEGARE, Wuxi Hanying Machinery Manufacture, Langqi Compression Machinery (Shanghai).
The compressed air treatment system market is expected to register a CAGR of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Compressed Air Treatment System Market Overview
4.1 Introduction
4.1.1 Market Taxonomy
4.1.2 Market Definition
4.1.3 Macro-Economic Factors Impacting the Market Growth
4.2 Compressed Air Treatment System Market Dynamics
4.2.1 Market Drivers
4.2.2 Market Restraints
4.2.3 Market Opportunity
4.3 Compressed Air Treatment System Market - Supply Chain Analysis
4.3.1 List of Key Suppliers
4.3.2 List of Key Distributors
4.3.3 List of Key Consumers
4.4 Key Forces Shaping the Compressed Air Treatment System Market
4.4.1 Bargaining Power of Suppliers
4.4.2 Bargaining Power of Buyers
4.4.3 Threat of Substitution
4.4.4 Threat of New Entrants
4.4.5 Competitive Rivalry
4.5 Global Compressed Air Treatment System Market Size & Forecast, 2018-2028
4.5.1 Compressed Air Treatment System Market Size and Y-o-Y Growth
4.5.2 Compressed Air Treatment System Market Absolute $ Opportunity
Chapter 5 Global Compressed Air Treatment System Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Compressed Air Treatment System Market Size Forecast by Type
5.2.1 Dryers
5.2.2 Filters
5.2.3 Aftercoolers
5.2.4 Others
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Compressed Air Treatment System Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Compressed Air Treatment System Market Size Forecast by Applications
6.2.1 Chemical Industry
6.2.2 Papermaking
6.2.3 Medical
6.2.4 Food Industry
6.2.5 Electronics
6.2.6 Others
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Compressed Air Treatment System Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Compressed Air Treatment System Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Compressed Air Treatment System Analysis and Forecast
9.1 Introduction
9.2 North America Compressed Air Treatment System Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Compressed Air Treatment System Market Size Forecast by Type
9.6.1 Dryers
9.6.2 Filters
9.6.3 Aftercoolers
9.6.4 Others
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Compressed Air Treatment System Market Size Forecast by Applications
9.10.1 Chemical Industry
9.10.2 Papermaking
9.10.3 Medical
9.10.4 Food Industry
9.10.5 Electronics
9.10.6 Others
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Compressed Air Treatment System Analysis and Forecast
10.1 Introduction
10.2 Europe Compressed Air Treatment System Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Compressed Air Treatment System Market Size Forecast by Type
10.6.1 Dryers
10.6.2 Filters
10.6.3 Aftercoolers
10.6.4 Others
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Compressed Air Treatment System Market Size Forecast by Applications
10.10.1 Chemical Industry
10.10.2 Papermaking
10.10.3 Medical
10.10.4 Food Industry
10.10.5 Electronics
10.10.6 Others
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Compressed Air Treatment System Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Compressed Air Treatment System Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Compressed Air Treatment System Market Size Forecast by Type
11.6.1 Dryers
11.6.2 Filters
11.6.3 Aftercoolers
11.6.4 Others
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Compressed Air Treatment System Market Size Forecast by Applications
11.10.1 Chemical Industry
11.10.2 Papermaking
11.10.3 Medical
11.10.4 Food Industry
11.10.5 Electronics
11.10.6 Others
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Compressed Air Treatment System Analysis and Forecast
12.1 Introduction
12.2 Latin America Compressed Air Treatment System Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Compressed Air Treatment System Market Size Forecast by Type
12.6.1 Dryers
12.6.2 Filters
12.6.3 Aftercoolers
12.6.4 Others
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Compressed Air Treatment System Market Size Forecast by Applications
12.10.1 Chemical Industry
12.10.2 Papermaking
12.10.3 Medical
12.10.4 Food Industry
12.10.5 Electronics
12.10.6 Others
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Compressed Air Treatment System Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Compressed Air Treatment System Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Compressed Air Treatment System Market Size Forecast by Type
13.6.1 Dryers
13.6.2 Filters
13.6.3 Aftercoolers
13.6.4 Others
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Compressed Air Treatment System Market Size Forecast by Applications
13.10.1 Chemical Industry
13.10.2 Papermaking
13.10.3 Medical
13.10.4 Food Industry
13.10.5 Electronics
13.10.6 Others
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Compressed Air Treatment System Market: Competitive Dashboard
14.2 Global Compressed Air Treatment System Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Atlas Copco
14.3.2 Parker
14.3.3 Ingersoll Rand
14.3.4 Kaeser
14.3.5 Pneumatech
14.3.6 Gardner Denver
14.3.7 ALUP Compressors
14.3.8 VPC
14.3.9 General Air Products
14.3.10 Champion
14.3.11 BOGE
14.3.12 GTEC
14.3.13 Werther International
14.3.14 BEKO TECHNOLOGIES
14.3.15 Sullair (Hitachi)
14.3.16 SPX FLOW
14.3.17 Ceccato
14.3.18 Fini
14.3.19 Great Lakes Air
14.3.20 Denair Energy Saving Technology (Shanghai)
14.3.21 Xebec
14.3.22 Shanghai Xin Ran Compressor
14.3.23 Hangzhou Huilan Gas Equipment
14.3.24 DEGARE
14.3.25 Wuxi Hanying Machinery Manufacture
14.3.26 Langqi Compression Machinery (Shanghai)
