Market Overview:
The global condensate polisher systems market is expected to grow at a CAGR of 5.5% from 2018 to 2030. The market growth is attributed to the increasing demand for power and rising investments in the power sector across the globe. In addition, growing awareness about environmental concerns and stringent regulations regarding air quality are also propelling the demand for condensate polisher systems globally. Based on type, the global condensate polisher systems market can be segmented into high pressure/high temperature pre-filtration systems, regenerant preparation vessels, waste regenerant treatment, and others. The high pressure/high temperature pre-filtration systems segment is expected to account for a major share of the global market in 2018 owing to its ability to remove contaminants from steam turbine exhausts and improve plant efficiency. Based on application, the global condensate polisher systems market can be divided into power plants and others. The power plants segment is anticipated to hold a dominant position in terms of revenue during the forecast period owing to increasing investments in new as well as existing thermal & nuclear power plants across regions such as North America, Latin America, Europe Asia Pacific ,and Middle East & Africa .
Product Definition:
A condensate polisher system is an important part of a steam system that produces clean, dry steam. The system removes contaminants from the condensate (water) returning to the boiler. This helps ensure that the boiler water remains clean and does not corrode or scale the inside of the boiler.
High Pressure/High temperature pre-filtration systems:
High pressure/high temperature pre-filtration systems, it's usage and growth factor in Condensate Polisher Systems market? High Pressure/High Temperature Pre-Filtration System (HPPFS) is used to remove particulate matter from gas or liquid flow before it goes through the heat exchanger. The system works on the principle of vapor compression.
Regenerant Preparation Vessels:
Regenerant preparation vessels are used in condensate polisher systems to regenerate or prepare regenerants. Regenerants are substances that can be recycled to obtain energy from them and used in the form of fuel. Condensates which consist of hydrocarbons, water and other impurities need to be removed from gas streams before they can enter into a power plant for further processing.
Application Insights:
The power plant application segment accounted for the largest revenue share in 2017 and is projected to expand at a CAGR of XX% over the forecast period. Condensate polishing is used to remove scale formations from cooling water systems at power plants, which are used in various processes such as cooling towers, circulating water systems and process heating equipment. The regeneration process uses condensates generated during thermal electricity generation as well as from fossil fuels-based power plants for generating steam that drives turbines along with other equipment.
Regenerant preparation vessel (R PV) units are designed specifically for regenerating boilers or reactors using high pressure/temperature pre-filtration system (HPPF).
Regional Analysis:
Asia Pacific dominated the global condensate polisher systems market in 2017 and is expected to continue its dominance over the forecast period. The presence of large-scale power generation facilities, coupled with growing industrialization across emerging economies such as China and India, is anticipated to drive demand for condensate polishing systems in this region. In addition, increasing government initiatives towards energy conservation are likely to result in a rise in demand for regenerative power plants which will further propel growth.
The Asia Pacific regional market accounted for over 35% of total revenue share owing to high product penetration rates observed across end-use industries such as oil & gas and power generation applications operating within this region. Furthermore, rising investments by prominent players towards capacity expansion are also expected to contribute toward industry growth during the forecast period.
Growth Factors:
- Increasing demand for purified water in various industries
- Growing awareness about the benefits of using purified water
- Rising investments in municipal and industrial wastewater treatment infrastructure
- Technological advancements in condensate polisher systems that improve performance and efficiency
- Growing demand for treated water from power generation and other industries
Scope Of The Report
Report Attributes
Report Details
Report Title
Condensate Polisher Systems Market Research Report
By Type
High Pressure/High temperature pre-filtration systems, Regenerant Preparation Vessels, Waste Regenerant Treatment, Others
By Application
Power Plant, Others
By Companies
SUEZ, Nalco PTS, GEA Group, Graver Water Systems, Siemens, Purolite, Ecodyne, Driplex Water Engg Pvt. Ltd., Wigen Water Technologies, HUVIS WATER, Veolia, Gopani, Ovivo, Hydroflux Industrial
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
233
Number of Tables & Figures
164
Customization Available
Yes, the report can be customized as per your need.
Global Condensate Polisher Systems Market Report Segments:
The global Condensate Polisher Systems market is segmented on the basis of:
Types
High Pressure/High temperature pre-filtration systems, Regenerant Preparation Vessels, Waste Regenerant Treatment, Others
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Power Plant, Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- SUEZ
- Nalco PTS
- GEA Group
- Graver Water Systems
- Siemens
- Purolite
- Ecodyne
- Driplex Water Engg Pvt. Ltd.
- Wigen Water Technologies
- HUVIS WATER
- Veolia
- Gopani
- Ovivo
- Hydroflux Industrial
Highlights of The Condensate Polisher Systems Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- High Pressure/High temperature pre-filtration systems
- Regenerant Preparation Vessels
- Waste Regenerant Treatment
- Others
- By Application:
- Power Plant
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Condensate Polisher Systems Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Condensate polisher systems are a type of industrial cleaning equipment that use rotating drums to remove condensed water, sludge, and other contaminants from surfaces.
Some of the key players operating in the condensate polisher systems market are SUEZ, Nalco PTS, GEA Group, Graver Water Systems, Siemens, Purolite, Ecodyne, Driplex Water Engg Pvt. Ltd., Wigen Water Technologies, HUVIS WATER, Veolia, Gopani, Ovivo, Hydroflux Industrial.
The condensate polisher systems market is expected to grow at a compound annual growth rate of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Condensate Polisher Systems Market Overview 4.1 Introduction 4.1.1 Market Taxonomy 4.1.2 Market Definition 4.1.3 Macro-Economic Factors Impacting the Market Growth 4.2 Condensate Polisher Systems Market Dynamics 4.2.1 Market Drivers 4.2.2 Market Restraints 4.2.3 Market Opportunity 4.3 Condensate Polisher Systems Market - Supply Chain Analysis 4.3.1 List of Key Suppliers 4.3.2 List of Key Distributors 4.3.3 List of Key Consumers 4.4 Key Forces Shaping the Condensate Polisher Systems Market 4.4.1 Bargaining Power of Suppliers 4.4.2 Bargaining Power of Buyers 4.4.3 Threat of Substitution 4.4.4 Threat of New Entrants 4.4.5 Competitive Rivalry 4.5 Global Condensate Polisher Systems Market Size & Forecast, 2018-2028 4.5.1 Condensate Polisher Systems Market Size and Y-o-Y Growth 4.5.2 Condensate Polisher Systems Market Absolute $ Opportunity
Chapter 5 Global Condensate Polisher Systems Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Condensate Polisher Systems Market Size Forecast by Type
5.2.1 High Pressure/High temperature pre-filtration systems
5.2.2 Regenerant Preparation Vessels
5.2.3 Waste Regenerant Treatment
5.2.4 Others
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Condensate Polisher Systems Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Condensate Polisher Systems Market Size Forecast by Applications
6.2.1 Power Plant
6.2.2 Others
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Condensate Polisher Systems Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Condensate Polisher Systems Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Condensate Polisher Systems Analysis and Forecast
9.1 Introduction
9.2 North America Condensate Polisher Systems Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Condensate Polisher Systems Market Size Forecast by Type
9.6.1 High Pressure/High temperature pre-filtration systems
9.6.2 Regenerant Preparation Vessels
9.6.3 Waste Regenerant Treatment
9.6.4 Others
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Condensate Polisher Systems Market Size Forecast by Applications
9.10.1 Power Plant
9.10.2 Others
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Condensate Polisher Systems Analysis and Forecast
10.1 Introduction
10.2 Europe Condensate Polisher Systems Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Condensate Polisher Systems Market Size Forecast by Type
10.6.1 High Pressure/High temperature pre-filtration systems
10.6.2 Regenerant Preparation Vessels
10.6.3 Waste Regenerant Treatment
10.6.4 Others
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Condensate Polisher Systems Market Size Forecast by Applications
10.10.1 Power Plant
10.10.2 Others
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Condensate Polisher Systems Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Condensate Polisher Systems Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Condensate Polisher Systems Market Size Forecast by Type
11.6.1 High Pressure/High temperature pre-filtration systems
11.6.2 Regenerant Preparation Vessels
11.6.3 Waste Regenerant Treatment
11.6.4 Others
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Condensate Polisher Systems Market Size Forecast by Applications
11.10.1 Power Plant
11.10.2 Others
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Condensate Polisher Systems Analysis and Forecast
12.1 Introduction
12.2 Latin America Condensate Polisher Systems Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Condensate Polisher Systems Market Size Forecast by Type
12.6.1 High Pressure/High temperature pre-filtration systems
12.6.2 Regenerant Preparation Vessels
12.6.3 Waste Regenerant Treatment
12.6.4 Others
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Condensate Polisher Systems Market Size Forecast by Applications
12.10.1 Power Plant
12.10.2 Others
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Condensate Polisher Systems Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Condensate Polisher Systems Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Condensate Polisher Systems Market Size Forecast by Type
13.6.1 High Pressure/High temperature pre-filtration systems
13.6.2 Regenerant Preparation Vessels
13.6.3 Waste Regenerant Treatment
13.6.4 Others
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Condensate Polisher Systems Market Size Forecast by Applications
13.10.1 Power Plant
13.10.2 Others
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Condensate Polisher Systems Market: Competitive Dashboard
14.2 Global Condensate Polisher Systems Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 SUEZ
14.3.2 Nalco PTS
14.3.3 GEA Group
14.3.4 Graver Water Systems
14.3.5 Siemens
14.3.6 Purolite
14.3.7 Ecodyne
14.3.8 Driplex Water Engg Pvt. Ltd.
14.3.9 Wigen Water Technologies
14.3.10 HUVIS WATER
14.3.11 Veolia
14.3.12 Gopani
14.3.13 Ovivo
14.3.14 Hydroflux Industrial