Market Overview:
The global conventional wiper blades market is expected to grow at a CAGR of 5.5% during the forecast period 2018-2030. The growth in the market can be attributed to factors such as, increasing demand for vehicles, rising disposable income and technological advancements. The OEMs market is expected to hold a major share of the global conventional wiper blades market during the forecast period. Asia Pacific is expected to be the fastest growing region in terms of CAGR during the forecast period 2018-2030.
Product Definition:
A conventional wiper blade is a type of windshield wiper blade that uses a metal frame with multiple rubber blades attached. It is the most common type of wiper blade and can be found on most vehicles.
10":
The global market size was valued at USD 1.1 billion in 2015 and is expected to grow at a CAGR of XX% over the forecast period on account of its increasing usage in Asia Pacific countries such as India, China, Malaysia and Indonesia. The growing automotive industry coupled with rising disposable income levels are anticipated to drive the demand for conventional wiper blades over the forecast period.
12":
12 inches is the measurement from one side of blade to other side. It's a standard size for conventional wiper blades. The longer the blade, the more surface area there is and generally it means better coverage and durability.
The most common sizes are 6-8 inches but 12 inch blades are mostly used in heavy traffic areas such as roadsides or busy parking lots where full coverage is required.
Application Insights:
The OEMs market is categorized on the basis of application as commercial vehicles and passenger cars. The commercial vehicle segment held around 60.0% share of the global conventional wiper blades market in 2017, owing to increasing demand from construction, mining and road maintenance industries for heavy-duty equipment. Moreover, stringent government regulations regarding cleanliness during travel along with rising awareness about hygiene are expected to drive growth over the forecast period.
Regional Analysis:
Europe dominated the global conventional wiper blades market in terms of revenue share in 2017. The presence of stringent regulations regarding vehicle water-intake system and emission control systems is one major factor responsible for the growth. Moreover, high awareness levels among consumers about maintaining cleanliness while driving are expected to drive demand over the forecast period. Asia Pacific is expected to witness significant growth over the next eight years owing to increasing disposable income, growing population, and rising automotive production rates in emerging economies such as China and India.
Growth Factors:
- Increasing demand for conventional wiper blades from the automotive industry as a result of increasing vehicle production
- Rising disposable income of consumers in developing countries, which is expected to boost the demand for conventional wiper blades over the forecast period
- Technological advancements in conventional wiper blade designs and materials that offer better performance and durability
- Growing awareness about the benefits of using conventional wipers over traditional wipers among consumers across regions
- Stringent government regulations mandating use of windshield wipers in vehicles
Scope Of The Report
Report Attributes
Report Details
Report Title
Conventional Wiper Blades Market Research Report
By Type
10", 12", 16", 18", 20", 22", 24", 26", 28", Others
By Application
OEMs Market, Aftermarket
By Companies
ITW, Hella, DENSO, TRICO, Bosch, Tenneco, Lucas Electrical, Isla Components Limited, ECOGARD, SPLASH Products, ITW
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
239
Number of Tables & Figures
168
Customization Available
Yes, the report can be customized as per your need.
Global Conventional Wiper Blades Market Report Segments:
The global Conventional Wiper Blades market is segmented on the basis of:
Types
10", 12", 16", 18", 20", 22", 24", 26", 28", Others
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
OEMs Market, Aftermarket
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- ITW
- Hella
- DENSO
- TRICO
- Bosch
- Tenneco
- Lucas Electrical
- Isla Components Limited
- ECOGARD
- SPLASH Products
- ITW
Highlights of The Conventional Wiper Blades Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- 10"
- 12"
- 16"
- 18"
- 20"
- 22"
- 24"
- 26"
- 28"
- Others
- By Application:
- OEMs Market
- Aftermarket
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Conventional Wiper Blades Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Conventional wiper blades are made of rubber and metal. They have a circular design and are attached to the windshield with screws. The blades move back and forth across the windshield to clean it.
Some of the major companies in the conventional wiper blades market are ITW, Hella, DENSO, TRICO, Bosch, Tenneco, Lucas Electrical, Isla Components Limited, ECOGARD, SPLASH Products, ITW.
The conventional wiper blades market is expected to register a CAGR of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Conventional Wiper Blades Market Overview 4.1 Introduction 4.1.1 Market Taxonomy 4.1.2 Market Definition 4.1.3 Macro-Economic Factors Impacting the Market Growth 4.2 Conventional Wiper Blades Market Dynamics 4.2.1 Market Drivers 4.2.2 Market Restraints 4.2.3 Market Opportunity 4.3 Conventional Wiper Blades Market - Supply Chain Analysis 4.3.1 List of Key Suppliers 4.3.2 List of Key Distributors 4.3.3 List of Key Consumers 4.4 Key Forces Shaping the Conventional Wiper Blades Market 4.4.1 Bargaining Power of Suppliers 4.4.2 Bargaining Power of Buyers 4.4.3 Threat of Substitution 4.4.4 Threat of New Entrants 4.4.5 Competitive Rivalry 4.5 Global Conventional Wiper Blades Market Size & Forecast, 2020-2028 4.5.1 Conventional Wiper Blades Market Size and Y-o-Y Growth 4.5.2 Conventional Wiper Blades Market Absolute $ Opportunity
Chapter 5 Global Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Market Size Forecast by Type
5.2.1 10"
5.2.2 12"
5.2.3 16"
5.2.4 18"
5.2.5 20"
5.2.6 22"
5.2.7 24"
5.2.8 26"
5.2.9 28"
5.2.10 Others
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Market Size Forecast by Applications
6.2.1 OEMs Market
6.2.2 Aftermarket
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Conventional Wiper Blades Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Conventional Wiper Blades Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Analysis and Forecast
9.1 Introduction
9.2 North America Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Market Size Forecast by Type
9.6.1 10"
9.6.2 12"
9.6.3 16"
9.6.4 18"
9.6.5 20"
9.6.6 22"
9.6.7 24"
9.6.8 26"
9.6.9 28"
9.6.10 Others
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Market Size Forecast by Applications
9.10.1 OEMs Market
9.10.2 Aftermarket
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Analysis and Forecast
10.1 Introduction
10.2 Europe Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Market Size Forecast by Type
10.6.1 10"
10.6.2 12"
10.6.3 16"
10.6.4 18"
10.6.5 20"
10.6.6 22"
10.6.7 24"
10.6.8 26"
10.6.9 28"
10.6.10 Others
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Market Size Forecast by Applications
10.10.1 OEMs Market
10.10.2 Aftermarket
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Market Size Forecast by Type
11.6.1 10"
11.6.2 12"
11.6.3 16"
11.6.4 18"
11.6.5 20"
11.6.6 22"
11.6.7 24"
11.6.8 26"
11.6.9 28"
11.6.10 Others
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Market Size Forecast by Applications
11.10.1 OEMs Market
11.10.2 Aftermarket
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Analysis and Forecast
12.1 Introduction
12.2 Latin America Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Market Size Forecast by Type
12.6.1 10"
12.6.2 12"
12.6.3 16"
12.6.4 18"
12.6.5 20"
12.6.6 22"
12.6.7 24"
12.6.8 26"
12.6.9 28"
12.6.10 Others
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Market Size Forecast by Applications
12.10.1 OEMs Market
12.10.2 Aftermarket
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Market Size Forecast by Type
13.6.1 10"
13.6.2 12"
13.6.3 16"
13.6.4 18"
13.6.5 20"
13.6.6 22"
13.6.7 24"
13.6.8 26"
13.6.9 28"
13.6.10 Others
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Market Size Forecast by Applications
13.10.1 OEMs Market
13.10.2 Aftermarket
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Conventional Wiper Blades Market: Competitive Dashboard
14.2 Global Conventional Wiper Blades Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 ITW
14.3.2 Hella
14.3.3 DENSO
14.3.4 TRICO
14.3.5 Bosch
14.3.6 Tenneco
14.3.7 Lucas Electrical
14.3.8 Isla Components Limited
14.3.9 ECOGARD
14.3.10 SPLASH Products
14.3.11 ITW