Market Overview:
The global cured formed-in-place gaskets market is expected to grow at a CAGR of 5.5% from 2018 to 2030. The growth of the market can be attributed to the increasing demand for cured formed-in-place gaskets in various applications, such as electronic equipment, fuel cell assembly, sealed underwater housing, heat sealing, speaker assembly and noise reduction, and other applications. In addition, the growing demand for UV-curable form in place gaskets is also contributing to the growth of this market.
Product Definition:
Cured Formed-in-Place Gaskets are gaskets that are made out of a soft material, such as silicone, and then formed into the shape of the part they are going to seal. They are important because they provide a tight seal between two parts and can be used in places where traditional gaskets would not work.
UV-Curable Form in Place Gaskets:
UV-curable form in place gaskets are used to control the flow of gases and liquids in high-temperature applications. They are available with a choice of materials, such as polyimide, polyethersulfone (PES), silicone rubber or neoprene. UV curable form gaskets can be customized for tight fits into most any opening and have excellent sealing properties due to their unique crosslinking technology.
Visible Light-Curable Form in Place Gaskets:
Visible light-curable form in place gaskets are used to provide a light cure for formed-in-place gaskets. These products are available as preformed shapes and can be easily installed using an adhesive or mechanical fastener. The visible light source utilized for the curing process should have a wavelength between 400 nm to 700 nm.
The market is driven by growing demand from various application industries including construction, electronics, automotive & transportation,.
Application Insights:
Electronic equipment was the largest application segment in 2017 and is projected to witness significant growth over the forecast period. The global electronic equipment industry has witnessed tremendous growth over the past few years on account of increasing demand for consumer electronics products such as smartphones, laptops, tablets, etc. This industry also includes semiconductor and related components which are used in various electronic devices.
The fuel cell assembly segment is expected to register a CAGR of XX% from 2018 to 2030 owing to rising R&D activities pertaining to advanced energy systems that use fuel cells as their power source. These systems do not produce any harmful waste products like carbon dioxide along with other gases during operation since they generate electricity through the process of electrolysis using natural gas or hydrogen produced from water by means of a chemical reaction between these two elements called ¢â‚¬Å“H2O + O2¢â‚¬ (hydrogen and oxygen).
Regional Analysis:
Asia Pacific dominated the global market in 2017. The region is expected to witness significant growth over the forecast period owing to increasing demand for consumer electronics and automobiles. In addition, rising government spending on infrastructure development is anticipated to fuel product demand in countries such as China, India, and Japan.
The Asia Pacific market was valued at USD X million in 2017 and is projected to grow at a CAGR of XX% from 2018 to 2030 owing high growth opportunities across several end-use industries such as automotive & transportation, industrial machinery & equipment manufacturing among others. Increasing foreign investments coupled with favorable government policies are also contributing toward regional growth trends.- Foreign direct investments (FDI) have increased by more than 600% since 2010; whereas portfolio investment has grown by nearly 300%.
Growth Factors:
- Increasing demand for cured formed-in-place gaskets in the automotive industry on account of their superior properties as compared to traditional gaskets
- Rising demand for cured formed-in-place gaskets from the oil and gas industry due to increasing exploration and production activities
- Growing popularity of cured formed-in-place gaskets in the construction sector on account of their ability to withstand high temperatures and pressures
- Increasing use of cured formed-in-place gaskets in various industrial applications owing to their superior performance characteristics
- Technological advancements that have led to the development of new and innovative curing methods for forming shaped seals, which is expected to boost market growth over the forecast period
Scope Of The Report
Report Attributes
Report Details
Report Title
Cured Formed-in-Place Gaskets Market Research Report
By Type
UV-Curable Form in Place Gaskets, Visible Light-Curable Form in Place Gaskets
By Application
Electronic Equipment, Fuel Cell Assembly, Sealed Underwater Housing, Heat Sealing, Speaker Assembly and Noise Reduction, Other
By Companies
Henkel, Dymax Corporation, M, Dow, Wacker Chemie, ThreeBond Group, DELO, Master Bond
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
216
Number of Tables & Figures
152
Customization Available
Yes, the report can be customized as per your need.
Global Cured Formed-in-Place Gaskets Market Report Segments:
The global Cured Formed-in-Place Gaskets market is segmented on the basis of:
Types
UV-Curable Form in Place Gaskets, Visible Light-Curable Form in Place Gaskets
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Electronic Equipment, Fuel Cell Assembly, Sealed Underwater Housing, Heat Sealing, Speaker Assembly and Noise Reduction, Other
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Henkel
- Dymax Corporation
- M
- Dow
- Wacker Chemie
- ThreeBond Group
- DELO
- Master Bond
Highlights of The Cured Formed-in-Place Gaskets Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- UV-Curable Form in Place Gaskets
- Visible Light-Curable Form in Place Gaskets
- By Application:
- Electronic Equipment
- Fuel Cell Assembly
- Sealed Underwater Housing
- Heat Sealing
- Speaker Assembly and Noise Reduction
- Other
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Cured Formed-in-Place Gaskets Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Cured formed-in-place gaskets are a type of rubber or plastic gasket that is cured in place. This means that the gasket is permanently attached to the surface it was installed on, and cannot be removed without damaging the surface. Cured formed-in-place gaskets are most commonly used in industrial applications, where they are required to withstand high temperatures and pressures.
Some of the key players operating in the cured formed-in-place gaskets market are Henkel, Dymax Corporation, M, Dow, Wacker Chemie, ThreeBond Group, DELO, Master Bond.
The cured formed-in-place gaskets market is expected to register a CAGR of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Cured Formed-in-Place Gaskets Market Overview 4.1 Introduction 4.1.1 Market Taxonomy 4.1.2 Market Definition 4.1.3 Macro-Economic Factors Impacting the Market Growth 4.2 Cured Formed-in-Place Gaskets Market Dynamics 4.2.1 Market Drivers 4.2.2 Market Restraints 4.2.3 Market Opportunity 4.3 Cured Formed-in-Place Gaskets Market - Supply Chain Analysis 4.3.1 List of Key Suppliers 4.3.2 List of Key Distributors 4.3.3 List of Key Consumers 4.4 Key Forces Shaping the Cured Formed-in-Place Gaskets Market 4.4.1 Bargaining Power of Suppliers 4.4.2 Bargaining Power of Buyers 4.4.3 Threat of Substitution 4.4.4 Threat of New Entrants 4.4.5 Competitive Rivalry 4.5 Global Cured Formed-in-Place Gaskets Market Size & Forecast, 2020-2028 4.5.1 Cured Formed-in-Place Gaskets Market Size and Y-o-Y Growth 4.5.2 Cured Formed-in-Place Gaskets Market Absolute $ Opportunity
Chapter 5 Global Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Market Size Forecast by Type
5.2.1 UV-Curable Form in Place Gaskets
5.2.2 Visible Light-Curable Form in Place Gaskets
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Market Size Forecast by Applications
6.2.1 Electronic Equipment
6.2.2 Fuel Cell Assembly
6.2.3 Sealed Underwater Housing
6.2.4 Heat Sealing
6.2.5 Speaker Assembly and Noise Reduction
6.2.6 Other
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Cured Formed-in-Place Gaskets Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Cured Formed-in-Place Gaskets Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Analysis and Forecast
9.1 Introduction
9.2 North America Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Market Size Forecast by Type
9.6.1 UV-Curable Form in Place Gaskets
9.6.2 Visible Light-Curable Form in Place Gaskets
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Market Size Forecast by Applications
9.10.1 Electronic Equipment
9.10.2 Fuel Cell Assembly
9.10.3 Sealed Underwater Housing
9.10.4 Heat Sealing
9.10.5 Speaker Assembly and Noise Reduction
9.10.6 Other
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Analysis and Forecast
10.1 Introduction
10.2 Europe Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Market Size Forecast by Type
10.6.1 UV-Curable Form in Place Gaskets
10.6.2 Visible Light-Curable Form in Place Gaskets
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Market Size Forecast by Applications
10.10.1 Electronic Equipment
10.10.2 Fuel Cell Assembly
10.10.3 Sealed Underwater Housing
10.10.4 Heat Sealing
10.10.5 Speaker Assembly and Noise Reduction
10.10.6 Other
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Market Size Forecast by Type
11.6.1 UV-Curable Form in Place Gaskets
11.6.2 Visible Light-Curable Form in Place Gaskets
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Market Size Forecast by Applications
11.10.1 Electronic Equipment
11.10.2 Fuel Cell Assembly
11.10.3 Sealed Underwater Housing
11.10.4 Heat Sealing
11.10.5 Speaker Assembly and Noise Reduction
11.10.6 Other
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Analysis and Forecast
12.1 Introduction
12.2 Latin America Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Market Size Forecast by Type
12.6.1 UV-Curable Form in Place Gaskets
12.6.2 Visible Light-Curable Form in Place Gaskets
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Market Size Forecast by Applications
12.10.1 Electronic Equipment
12.10.2 Fuel Cell Assembly
12.10.3 Sealed Underwater Housing
12.10.4 Heat Sealing
12.10.5 Speaker Assembly and Noise Reduction
12.10.6 Other
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Market Size Forecast by Type
13.6.1 UV-Curable Form in Place Gaskets
13.6.2 Visible Light-Curable Form in Place Gaskets
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Market Size Forecast by Applications
13.10.1 Electronic Equipment
13.10.2 Fuel Cell Assembly
13.10.3 Sealed Underwater Housing
13.10.4 Heat Sealing
13.10.5 Speaker Assembly and Noise Reduction
13.10.6 Other
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Cured Formed-in-Place Gaskets Market: Competitive Dashboard
14.2 Global Cured Formed-in-Place Gaskets Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Henkel
14.3.2 Dymax Corporation
14.3.3 M
14.3.4 Dow
14.3.5 Wacker Chemie
14.3.6 ThreeBond Group
14.3.7 DELO
14.3.8 Master Bond