Market Overview:
The global cylinder head gasket market is estimated to be valued at US$ XX Mn in 2018 and is projected to reach US$ XX Mn by 2030, exhibiting a CAGR of X.X%. The metal gasket segment is expected to account for the majority share of the global market in 2018. However, the non-metal gasket segment is anticipated to register the highest CAGR over the forecast period. Among applications, passenger cars are expected to account for a larger share of the global market in 2018; however, commercial vehicles are projected to exhibit higher growth rates during the forecast period. Geographically, North America dominates the global cylinder head gasket market followed by Europe and Asia Pacific.
Product Definition:
The cylinder head gasket is a seal that sits between the engine block and the cylinder head. Its purpose is to prevent fluids, gases, and heat from escaping from the engine. The cylinder head gasket is important because it helps to keep the engine running smoothly and prevents it from overheating.
Metal Gasket:
Metal gasket is a sealing device made up of metal and plastic which is used in cylinder headgasket. It prevents the head from moving out of round and also acts as a seal to prevent any kind of leakages. Metal gaskets are available in different forms such as rings, washers, retainers and O-rings. They are installed between the cylinder block and piston or between the piston & ring or directly over the top of bearing cap (if using oil).
Non-Metal Gasket:
Non-metal gasket is a sealing device that does not contain any metal. It is usually made up of rubber, plastic or other synthetic materials. The main function of non-metal gasket is to seal the gap between two surfaces and prevent leakage.
Application Insights:
The passenger cars segment held the largest share of over 60.0% in 2017. The growth is attributed to increasing production of passenger vehicles in emerging economies including China, India and Brazil. Furthermore, stringent regulations regarding safety and emission control implemented by regional governments are expected to promote the demand for new vehicle replacement activities thereby supporting product demand over the forecast period.
Regional Analysis:
Asia Pacific dominated the global market in 2017 and is expected to continue its dominance over the forecast period. The presence of key automobile manufacturers such as Toyota, Honda, Hyundai, Tata Motors and others have resulted in high demand for HCW across Asia Pacific region. Furthermore, rising disposable income levels coupled with increasing population has resulted in increased sales of premium cars which require superior quality HCW. This is likely to drive product demand over the forecast period.
Europe was estimated at USD X million in 2017 owing to growing automotive industry supported by stringent emission norms implemented by European government such as Euro 6c legislation and other national regulations governing vehicular emissions that affect vehicle performance characteristics (powertrain efficiency etc.). North America HCW market was valued at USD X million in 2017 on account of high consumption from U.S.
Growth Factors:
- Increasing demand for automobiles
- Growing automotive industry in developing countries
- Rising disposable income of consumers in developing countries
- Technological advancements in the automotive sector
- Stringent emission norms by regulatory authorities
Scope Of The Report
Report Attributes
Report Details
Report Title
Cylinder Head Gasket Market Research Report
By Type
Metal Gasket, Non-Metal Gasket, Composite Material
By Application
Passenger Cars, Commercial Vehicles
By Companies
ElringKlinger, Federal-Mogul (Tenneco), Nippon Gasket, Dana, NOK, Yantai Ishikawa Sealing Technology, Nippon Leakless Corp, NICHIAS Corporation, Sanwa Packing Industry, Ajusa, Uchiyama Manufacturing Corp, Kokusan Parts Industry, Freudenberg, Jayem Auto Industries
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
249
Number of Tables & Figures
175
Customization Available
Yes, the report can be customized as per your need.
Global Cylinder Head Gasket Market Report Segments:
The global Cylinder Head Gasket market is segmented on the basis of:
Types
Metal Gasket, Non-Metal Gasket, Composite Material
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Passenger Cars, Commercial Vehicles
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- ElringKlinger
- Federal-Mogul (Tenneco)
- Nippon Gasket
- Dana
- NOK
- Yantai Ishikawa Sealing Technology
- Nippon Leakless Corp
- NICHIAS Corporation
- Sanwa Packing Industry
- Ajusa
- Uchiyama Manufacturing Corp
- Kokusan Parts Industry
- Freudenberg
- Jayem Auto Industries
Highlights of The Cylinder Head Gasket Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Metal Gasket
- Non-Metal Gasket
- Composite Material
- By Application:
- Passenger Cars
- Commercial Vehicles
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Cylinder Head Gasket Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
The cylinder head gasket is a type of sealant that is used to keep the air and oil mixture inside the engine cylinders. It also helps to prevent water and other contaminants from entering the engine.
Some of the major players in the cylinder head gasket market are ElringKlinger, Federal-Mogul (Tenneco), Nippon Gasket, Dana, NOK, Yantai Ishikawa Sealing Technology, Nippon Leakless Corp, NICHIAS Corporation, Sanwa Packing Industry, Ajusa, Uchiyama Manufacturing Corp, Kokusan Parts Industry, Freudenberg, Jayem Auto Industries.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Cylinder Head Gasket Market Overview
4.1 Introduction
4.1.1 Market Taxonomy
4.1.2 Market Definition
4.1.3 Macro-Economic Factors Impacting the Market Growth
4.2 Cylinder Head Gasket Market Dynamics
4.2.1 Market Drivers
4.2.2 Market Restraints
4.2.3 Market Opportunity
4.3 Cylinder Head Gasket Market - Supply Chain Analysis
4.3.1 List of Key Suppliers
4.3.2 List of Key Distributors
4.3.3 List of Key Consumers
4.4 Key Forces Shaping the Cylinder Head Gasket Market
4.4.1 Bargaining Power of Suppliers
4.4.2 Bargaining Power of Buyers
4.4.3 Threat of Substitution
4.4.4 Threat of New Entrants
4.4.5 Competitive Rivalry
4.5 Global Cylinder Head Gasket Market Size & Forecast, 2020-2028
4.5.1 Cylinder Head Gasket Market Size and Y-o-Y Growth
4.5.2 Cylinder Head Gasket Market Absolute $ Opportunity
Chapter 5 Global Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Market Size Forecast by Type
5.2.1 Metal Gasket
5.2.2 Non-Metal Gasket
5.2.3 Composite Material
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Market Size Forecast by Applications
6.2.1 Passenger Cars
6.2.2 Commercial Vehicles
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Cylinder Head Gasket Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Cylinder Head Gasket Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Analysis and Forecast
9.1 Introduction
9.2 North America Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Market Size Forecast by Type
9.6.1 Metal Gasket
9.6.2 Non-Metal Gasket
9.6.3 Composite Material
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Market Size Forecast by Applications
9.10.1 Passenger Cars
9.10.2 Commercial Vehicles
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Analysis and Forecast
10.1 Introduction
10.2 Europe Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Market Size Forecast by Type
10.6.1 Metal Gasket
10.6.2 Non-Metal Gasket
10.6.3 Composite Material
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Market Size Forecast by Applications
10.10.1 Passenger Cars
10.10.2 Commercial Vehicles
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Market Size Forecast by Type
11.6.1 Metal Gasket
11.6.2 Non-Metal Gasket
11.6.3 Composite Material
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Market Size Forecast by Applications
11.10.1 Passenger Cars
11.10.2 Commercial Vehicles
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Analysis and Forecast
12.1 Introduction
12.2 Latin America Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Market Size Forecast by Type
12.6.1 Metal Gasket
12.6.2 Non-Metal Gasket
12.6.3 Composite Material
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Market Size Forecast by Applications
12.10.1 Passenger Cars
12.10.2 Commercial Vehicles
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Market Size Forecast by Type
13.6.1 Metal Gasket
13.6.2 Non-Metal Gasket
13.6.3 Composite Material
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Market Size Forecast by Applications
13.10.1 Passenger Cars
13.10.2 Commercial Vehicles
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Cylinder Head Gasket Market: Competitive Dashboard
14.2 Global Cylinder Head Gasket Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 ElringKlinger
14.3.2 Federal-Mogul (Tenneco)
14.3.3 Nippon Gasket
14.3.4 Dana
14.3.5 NOK
14.3.6 Yantai Ishikawa Sealing Technology
14.3.7 Nippon Leakless Corp
14.3.8 NICHIAS Corporation
14.3.9 Sanwa Packing Industry
14.3.10 Ajusa
14.3.11 Uchiyama Manufacturing Corp
14.3.12 Kokusan Parts Industry
14.3.13 Freudenberg
14.3.14 Jayem Auto Industries
