Market Overview:
The global DC isolators market is expected to grow at a CAGR of 5.5% during the forecast period from 2018 to 2030. The growth in this market can be attributed to the increasing demand for energy-efficient and reliable electrical systems, especially in industrial and commercial applications. In addition, the growing awareness about safety and security issues is also driving the demand for DC isolators in various end-use industries. Based on type, the global DC isolators market can be segmented into single break isolator, double break isolator, and pantograph type isolator. Of these, single break isolation is expected to account for a major share of the market during the forecast period owing to its low cost and easy installation.
Product Definition:
DC Isolators are devices that electrically isolate two or more circuits while allowing DC current to flow between them. They can be used to protect sensitive equipment from power surges, or to prevent one circuit from interfering with another.
Single Break Isolator:
Single break isolator is a device used to interrupt the electric current in case of an emergency. It’s major application is in switchgear and circuit breakers where it helps in protecting the electrical components from short circuits, high temperatures, overvoltage and undervoltage. They are available as air-cooled or water-cooled variants depending on their applications.
The global single break isolator market size was valued at USD 1.5 billion in 2016.
Double Break Isolator:
Double break isolator is a type of gas insulator which consists of two sheets of non-metallic material joined by an air gap. It has applications in high voltage and low voltage power supplies, switch mode power supply, and automotive battery chargers.
The major advantage associated with this device is that it provides safety against short circuits as well as opens a path for free flow of gases between connected devices even if one or more joints fail.
Application Insights:
The industrial application segment led the global dc isolators market in 2017 and is projected to expand at a CAGR of XX% over the forecast period. The growing demand for electric motors, heat transfer equipment, and other machinery is expected to propel product demand in industrial applications.
Lighting application segment was valued at USD 536.1 million in 2017 owing to high usage rates of HID lamps across various industries such as automotive, construction, electronics etc., which require long-distance power transmission with low losses and high frequencies. The rising adoption of LED technology has resulted in significant savings by eliminating the need for large transformers that consume substantial amounts of energy while functioning at low efficiency levels compared to their incandescent counterparts; this trend is expected to continue over the coming years thus driving industry growth further down the road during analysis period (2018-2030).
Regional Analysis:
North America dominated the global market in 2017. The growth of the region can be attributed to increasing adoption of isolators for protection against lightning strikes and surges. Moreover, growing demand for power distribution is expected to drive the regional market over the forecast period.
Asia Pacific is anticipated to witness significant growth over the forecast period owing to rising construction activities in emerging economies such as India and China, thereby driving product demand across various applications including lighting and industrial equipment among others. Furthermore, improving economic conditions are also likely to contribute toward regional market development during the same period.
Growth Factors:
- Increasing demand for miniaturization in electronic devices
- Growing popularity of electric vehicles
- Proliferation of renewable energy sources
- Rising concerns over electromagnetic interference (EMI) and radio frequency interference (RFI)
- Advances in semiconductor technology
Scope Of The Report
Report Attributes
Report Details
Report Title
DC Isolators Market Research Report
By Type
Single Break Isolator, Double Break Isolator, Pantograph type Isolator
By Application
Lighting, Home Appliances, Industrial, Others
By Companies
ABB, Schneider Electric, Eaton, Mitsubishi Electric, Siemens, GE, Legrand, Fuji Electric, CHINT Electrics, Alstom, Rockwell Automation, Toshiba, Suntree, Yueqing Feeo Electric
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
171
Number of Tables & Figures
120
Customization Available
Yes, the report can be customized as per your need.
Global DC Isolators Market Report Segments:
The global DC Isolators market is segmented on the basis of:
Types
Single Break Isolator, Double Break Isolator, Pantograph type Isolator
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Lighting, Home Appliances, Industrial, Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- ABB
- Schneider Electric
- Eaton
- Mitsubishi Electric
- Siemens
- GE
- Legrand
- Fuji Electric
- CHINT Electrics
- Alstom
- Rockwell Automation
- Toshiba
- Suntree
- Yueqing Feeo Electric
Highlights of The DC Isolators Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Single Break Isolator
- Double Break Isolator
- Pantograph type Isolator
- By Application:
- Lighting
- Home Appliances
- Industrial
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the DC Isolators Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
DC isolators are a type of electrical insulation that is used to protect electronic equipment from the effects of electricity. DC isolators use an electric field to prevent the flow of current between two points, which helps to protect against damage caused by electrical shorts.
Some of the key players operating in the dc isolators market are ABB, Schneider Electric, Eaton, Mitsubishi Electric, Siemens, GE, Legrand, Fuji Electric, CHINT Electrics, Alstom, Rockwell Automation, Toshiba, Suntree, Yueqing Feeo Electric.
The dc isolators market is expected to grow at a compound annual growth rate of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 DC Isolators Market Overview 4.1 Introduction 4.1.1 Market Taxonomy 4.1.2 Market Definition 4.1.3 Macro-Economic Factors Impacting the Market Growth 4.2 DC Isolators Market Dynamics 4.2.1 Market Drivers 4.2.2 Market Restraints 4.2.3 Market Opportunity 4.3 DC Isolators Market - Supply Chain Analysis 4.3.1 List of Key Suppliers 4.3.2 List of Key Distributors 4.3.3 List of Key Consumers 4.4 Key Forces Shaping the DC Isolators Market 4.4.1 Bargaining Power of Suppliers 4.4.2 Bargaining Power of Buyers 4.4.3 Threat of Substitution 4.4.4 Threat of New Entrants 4.4.5 Competitive Rivalry 4.5 Global DC Isolators Market Size & Forecast, 2018-2028 4.5.1 DC Isolators Market Size and Y-o-Y Growth 4.5.2 DC Isolators Market Absolute $ Opportunity
Chapter 5 Global DC Isolators Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 DC Isolators Market Size Forecast by Type
5.2.1 Single Break Isolator
5.2.2 Double Break Isolator
5.2.3 Pantograph type Isolator
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global DC Isolators Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 DC Isolators Market Size Forecast by Applications
6.2.1 Lighting
6.2.2 Home Appliances
6.2.3 Industrial
6.2.4 Others
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global DC Isolators Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 DC Isolators Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America DC Isolators Analysis and Forecast
9.1 Introduction
9.2 North America DC Isolators Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America DC Isolators Market Size Forecast by Type
9.6.1 Single Break Isolator
9.6.2 Double Break Isolator
9.6.3 Pantograph type Isolator
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America DC Isolators Market Size Forecast by Applications
9.10.1 Lighting
9.10.2 Home Appliances
9.10.3 Industrial
9.10.4 Others
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe DC Isolators Analysis and Forecast
10.1 Introduction
10.2 Europe DC Isolators Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe DC Isolators Market Size Forecast by Type
10.6.1 Single Break Isolator
10.6.2 Double Break Isolator
10.6.3 Pantograph type Isolator
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe DC Isolators Market Size Forecast by Applications
10.10.1 Lighting
10.10.2 Home Appliances
10.10.3 Industrial
10.10.4 Others
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific DC Isolators Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific DC Isolators Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific DC Isolators Market Size Forecast by Type
11.6.1 Single Break Isolator
11.6.2 Double Break Isolator
11.6.3 Pantograph type Isolator
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific DC Isolators Market Size Forecast by Applications
11.10.1 Lighting
11.10.2 Home Appliances
11.10.3 Industrial
11.10.4 Others
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America DC Isolators Analysis and Forecast
12.1 Introduction
12.2 Latin America DC Isolators Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America DC Isolators Market Size Forecast by Type
12.6.1 Single Break Isolator
12.6.2 Double Break Isolator
12.6.3 Pantograph type Isolator
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America DC Isolators Market Size Forecast by Applications
12.10.1 Lighting
12.10.2 Home Appliances
12.10.3 Industrial
12.10.4 Others
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) DC Isolators Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) DC Isolators Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) DC Isolators Market Size Forecast by Type
13.6.1 Single Break Isolator
13.6.2 Double Break Isolator
13.6.3 Pantograph type Isolator
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) DC Isolators Market Size Forecast by Applications
13.10.1 Lighting
13.10.2 Home Appliances
13.10.3 Industrial
13.10.4 Others
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 DC Isolators Market: Competitive Dashboard
14.2 Global DC Isolators Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 ABB
14.3.2 Schneider Electric
14.3.3 Eaton
14.3.4 Mitsubishi Electric
14.3.5 Siemens
14.3.6 GE
14.3.7 Legrand
14.3.8 Fuji Electric
14.3.9 CHINT Electrics
14.3.10 Alstom
14.3.11 Rockwell Automation
14.3.12 Toshiba
14.3.13 Suntree
14.3.14 Yueqing Feeo Electric