Market Overview:
The global deformed bar market is expected to grow at a CAGR of 5.5% during the forecast period from 2018 to 2030. The market growth can be attributed to the increasing demand for deformed bars in various applications, such as house, bridge, and road construction. In terms of type, the diameter less than 16mm segment is expected to grow at a higher CAGR during the forecast period as compared to other segments. This can be attributed to the growing demand for small-diameter deformed bars in various end-use applications.
Product Definition:
A deformed bar is a metal bar that has been intentionally distorted to increase its strength. It is used in construction and other applications where high strength is required.
Diameter<16mm:
Diameter 16mm is a size of deformed bars which are widely used in construction sector. It has higher yield strength and tensile strength as compared to standard bar. Diameter 16mm products are cost effective, easy to handle and have longer durability as compared to other product types available in the market.
Construction industry uses these products for flooring, roofing, gutter installation & repair work etc.
Diameter16mm-32mm:
Diameter16mm-32mm is a size of deformed bars which are widely used in the construction industry. These bars are manufactured using high strength steel and have excellent load-bearing capacity. The product has 16 mm outer diameter and 32 mm inner diameter. It is available with smooth or serrated surfaces, according to client requirements.
Application Insights:
The demand for the product in various applications is shown in Table 1 below. The application segment includes house, bridge, road and others. In 2017, the road application accounted for a major share of over 50% in terms of revenue as well as volume. This is due to factors such as increasing construction activities and need to replace or repair worn-out sections of roads across the globe at an accelerated pace.
Deformed bars are used for a variety of applications including strengthening concrete structures against earthquakes, corrosion protection on bridges & buildings etc., reduction of wind load on building structures by providing effective bracing system etc., replacement or reinforcement of sectional walls that carry heavy loads such as traffic loads on account of high strength deformed bars provide better stability & support compared to conventional light weight concrete blocks etc.
Regional Analysis:
Asia Pacific dominated the global deformed bar market in terms of revenue with a share of over 40.0% in 2017. The region is expected to witness significant growth over the forecast period owing to increasing infrastructure activities coupled with rising industrialization and urbanization, which will lead to an increase in demand for steel bars.
The construction industry is one of the fastest-growing industries across Asia Pacific, driven by rapid urbanization and growing economies such as China and India. In addition, government initiatives encouraging affordable housing are expected to drive regional product demand over the forecast period.
Growth Factors:
- Increasing demand from construction and infrastructure sectors
- Rising demand for deformed bars in the automotive sector
- Growing use of deformed bars in the manufacturing of rebar cages
- Rising popularity of pre-stressed concrete structures
- Technological advancements that have led to the development of new grades and types of deformed bars
Scope Of The Report
Report Attributes
Report Details
Report Title
Deformed Bar Market Research Report
By Type
Diameter<16mm, Diameter16mm-32mm, Diameter>32mm
By Application
House, Bridge, Road, Others
By Companies
ArcelorMittal, Baowu Steel, Nippon Steel, HBIS Group, Pohang Iron and Steel, Shagang Group, Ansteel, JFE Steel, Shougang Group, Tata Steel
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
205
Number of Tables & Figures
144
Customization Available
Yes, the report can be customized as per your need.
Global Deformed Bar Market Report Segments:
The global Deformed Bar market is segmented on the basis of:
Types
Diameter<16mm, Diameter16mm-32mm, Diameter>32mm
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
House, Bridge, Road, Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- ArcelorMittal
- Baowu Steel
- Nippon Steel
- HBIS Group
- Pohang Iron and Steel
- Shagang Group
- Ansteel
- JFE Steel
- Shougang Group
- Tata Steel
Highlights of The Deformed Bar Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Diameter<16mm
- Diameter16mm-32mm
- Diameter>32mm
- By Application:
- House
- Bridge
- Road
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Deformed Bar Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
A deformed bar is a bar that has been bent, twisted, or otherwise distorted.
Some of the major players in the deformed bar market are ArcelorMittal, Baowu Steel, Nippon Steel, HBIS Group, Pohang Iron and Steel, Shagang Group, Ansteel, JFE Steel, Shougang Group, Tata Steel.
The deformed bar market is expected to grow at a compound annual growth rate of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Deformed Bar Market Overview 4.1 Introduction 4.1.1 Market Taxonomy 4.1.2 Market Definition 4.1.3 Macro-Economic Factors Impacting the Market Growth 4.2 Deformed Bar Market Dynamics 4.2.1 Market Drivers 4.2.2 Market Restraints 4.2.3 Market Opportunity 4.3 Deformed Bar Market - Supply Chain Analysis 4.3.1 List of Key Suppliers 4.3.2 List of Key Distributors 4.3.3 List of Key Consumers 4.4 Key Forces Shaping the Deformed Bar Market 4.4.1 Bargaining Power of Suppliers 4.4.2 Bargaining Power of Buyers 4.4.3 Threat of Substitution 4.4.4 Threat of New Entrants 4.4.5 Competitive Rivalry 4.5 Global Deformed Bar Market Size & Forecast, 2020-2028 4.5.1 Deformed Bar Market Size and Y-o-Y Growth 4.5.2 Deformed Bar Market Absolute $ Opportunity
Chapter 5 Global Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Market Size Forecast by Type
5.2.1 Diameter<16mm
5.2.2 Diameter16mm-32mm
5.2.3 Diameter>32mm
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Market Size Forecast by Applications
6.2.1 House
6.2.2 Bridge
6.2.3 Road
6.2.4 Others
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Deformed Bar Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Deformed Bar Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Analysis and Forecast
9.1 Introduction
9.2 North America Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Market Size Forecast by Type
9.6.1 Diameter<16mm
9.6.2 Diameter16mm-32mm
9.6.3 Diameter>32mm
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Market Size Forecast by Applications
9.10.1 House
9.10.2 Bridge
9.10.3 Road
9.10.4 Others
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Analysis and Forecast
10.1 Introduction
10.2 Europe Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Market Size Forecast by Type
10.6.1 Diameter<16mm
10.6.2 Diameter16mm-32mm
10.6.3 Diameter>32mm
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Market Size Forecast by Applications
10.10.1 House
10.10.2 Bridge
10.10.3 Road
10.10.4 Others
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Market Size Forecast by Type
11.6.1 Diameter<16mm
11.6.2 Diameter16mm-32mm
11.6.3 Diameter>32mm
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Market Size Forecast by Applications
11.10.1 House
11.10.2 Bridge
11.10.3 Road
11.10.4 Others
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Analysis and Forecast
12.1 Introduction
12.2 Latin America Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Market Size Forecast by Type
12.6.1 Diameter<16mm
12.6.2 Diameter16mm-32mm
12.6.3 Diameter>32mm
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Market Size Forecast by Applications
12.10.1 House
12.10.2 Bridge
12.10.3 Road
12.10.4 Others
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Market Size Forecast by Type
13.6.1 Diameter<16mm
13.6.2 Diameter16mm-32mm
13.6.3 Diameter>32mm
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Market Size Forecast by Applications
13.10.1 House
13.10.2 Bridge
13.10.3 Road
13.10.4 Others
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Deformed Bar Market: Competitive Dashboard
14.2 Global Deformed Bar Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 ArcelorMittal
14.3.2 Baowu Steel
14.3.3 Nippon Steel
14.3.4 HBIS Group
14.3.5 Pohang Iron and Steel
14.3.6 Shagang Group
14.3.7 Ansteel
14.3.8 JFE Steel
14.3.9 Shougang Group
14.3.10 Tata Steel