Market Overview:
The global fabric air dispersion system market is expected to grow at a CAGR of 5.5% from 2018 to 2030. The market growth is attributed to the increasing demand for fabric air dispersion systems from various end-use industries, such as industrial, public, commercial and other applications. In terms of type, the round fabric air dispersion system segment is expected to dominate the market during the forecast period owing to its high efficiency and low noise levels. However, in terms of CAGR, the half round fabric air dispersion system segment is projected to grow at a higher rate than other segments during the forecast period. to rapid industrialization.
Product Definition:
A fabric air dispersion system is a device that is used to disperse air evenly throughout a room or building. The importance of a fabric air dispersion system is that it can help to improve the overall comfort of the occupants by providing them with even heat and cooling. Additionally, it can help to improve the indoor air quality by distributing fresh air throughout the space.
Round:
The round is a device used to decrease the drag on machines and equipment. It's basically an air pump with a spinning impeller that forces the air into a narrow stream, which reduces its velocity and increases its density. The higher the speed of air, the greater will be its viscosity and energy content. This device is widely used in fluid dynamic applications as it provides high efficiency at low cost compared to other conventional devices such as cyclone or centrifugal pumps.
Half Round:
The half round is a closed-cell foam with an average density of 0.3 lb/ft³. It has high compressive strength and stiffness, low thermal conductivity, and high energy absorption capacity. The product is manufactured using polyurethane or expanded polystyrene materials that are available in different densities ranging from low (0.28 to 0.35) to medium (0.45 to 0).
Application Insights:
The other application segment includes food and beverage, chemical, pharmaceutical and personal care industries. Fabric air dispersion systems are widely used in these industries to improve the quality of air supplied to process areas or workstations. The other applications include various sectors such as healthcare, food & beverage industry which is expected to drive demand over the forecast period.
Fabric air dispensing systems have wide applications in industrial settings owing to their ability to control the flow of gases into a space as well as deliver precise amounts of chemicals at specific locations within a plant floor without having direct contact with those surfaces. These systems can also be integrated with existing HVAC (heating, ventilation and cooling) solutions thereby providing an efficient solution for dispersing chemicals within a room or area that requires cleanroom conditions for processing or manufacturing activities.
Regional Analysis:
Asia Pacific accounted for the largest share of over 40.0% in 2017 and is expected to witness significant growth over the forecast period. The region comprises several emerging economies, such as China, India, Indonesia, Malaysia and Thailand. Rapid industrialization coupled with stringent government regulations regarding employee safety is anticipated to drive the demand for AFDS systems in this region.
Europe was estimated at USD X million in 2017 and is projected to expand at a CAGR of XX% from 2018 to 2030 owing herringbone pattern flooring system being one of most popular flooring options across commercial buildings including shopping malls and airports in Germany and other European countries which has resulted these systems being widely adopted across Europe as well as North America due touniversities etc.
Growth Factors:
- Increasing demand for air purification systems in residential and commercial sectors
- Growing awareness about the health hazards caused by indoor air pollution
- Stringent government regulations on air quality and emissions control
- Technological advancements in fabric air dispersion systems that improve performance and efficiency
- Rising demand for green building technologies
Scope Of The Report
Report Attributes
Report Details
Report Title
Fabric Air Dispersion System Market Research Report
By Type
Round, Half Round, Other
By Application
Industrial, Public, Commercial, Other
By Companies
Durkeesox, FabricAir, Prihoda, DuctSox, EURO AIR, Hero Fabriduct, Aedis, Tianjin TEDA Bosion, JNS, Buna, Suzhou Buding, Avinsi, ATC, TurboaSOX
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
166
Number of Tables & Figures
117
Customization Available
Yes, the report can be customized as per your need.
Global Fabric Air Dispersion System Market Report Segments:
The global Fabric Air Dispersion System market is segmented on the basis of:
Types
Round, Half Round, Other
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Industrial, Public, Commercial, Other
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Durkeesox
- FabricAir
- Prihoda
- DuctSox
- EURO AIR
- Hero Fabriduct
- Aedis
- Tianjin TEDA Bosion
- JNS
- Buna
- Suzhou Buding
- Avinsi
- ATC
- TurboaSOX
Highlights of The Fabric Air Dispersion System Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Round
- Half Round
- Other
- By Application:
- Industrial
- Public
- Commercial
- Other
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Fabric Air Dispersion System Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
A fabric air dispersion system (FADS) is a type of air conditioning unit that uses a large number of small, lightweight fans to distribute the cooled air throughout a room. This system is often used in offices and other spaces where it is important to keep the temperature consistent throughout the space.
Some of the major companies in the fabric air dispersion system market are Durkeesox, FabricAir, Prihoda, DuctSox, EURO AIR, Hero Fabriduct, Aedis, Tianjin TEDA Bosion, JNS, Buna, Suzhou Buding, Avinsi, ATC, TurboaSOX.
The fabric air dispersion system market is expected to register a CAGR of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Fabric Air Dispersion System Market Overview
4.1 Introduction
4.1.1 Market Taxonomy
4.1.2 Market Definition
4.1.3 Macro-Economic Factors Impacting the Market Growth
4.2 Fabric Air Dispersion System Market Dynamics
4.2.1 Market Drivers
4.2.2 Market Restraints
4.2.3 Market Opportunity
4.3 Fabric Air Dispersion System Market - Supply Chain Analysis
4.3.1 List of Key Suppliers
4.3.2 List of Key Distributors
4.3.3 List of Key Consumers
4.4 Key Forces Shaping the Fabric Air Dispersion System Market
4.4.1 Bargaining Power of Suppliers
4.4.2 Bargaining Power of Buyers
4.4.3 Threat of Substitution
4.4.4 Threat of New Entrants
4.4.5 Competitive Rivalry
4.5 Global Fabric Air Dispersion System Market Size & Forecast, 2018-2028
4.5.1 Fabric Air Dispersion System Market Size and Y-o-Y Growth
4.5.2 Fabric Air Dispersion System Market Absolute $ Opportunity
Chapter 5 Global Fabric Air Dispersion System Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Fabric Air Dispersion System Market Size Forecast by Type
5.2.1 Round
5.2.2 Half Round
5.2.3 Other
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Fabric Air Dispersion System Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Fabric Air Dispersion System Market Size Forecast by Applications
6.2.1 Industrial
6.2.2 Public
6.2.3 Commercial
6.2.4 Other
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Fabric Air Dispersion System Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Fabric Air Dispersion System Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Fabric Air Dispersion System Analysis and Forecast
9.1 Introduction
9.2 North America Fabric Air Dispersion System Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Fabric Air Dispersion System Market Size Forecast by Type
9.6.1 Round
9.6.2 Half Round
9.6.3 Other
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Fabric Air Dispersion System Market Size Forecast by Applications
9.10.1 Industrial
9.10.2 Public
9.10.3 Commercial
9.10.4 Other
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Fabric Air Dispersion System Analysis and Forecast
10.1 Introduction
10.2 Europe Fabric Air Dispersion System Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Fabric Air Dispersion System Market Size Forecast by Type
10.6.1 Round
10.6.2 Half Round
10.6.3 Other
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Fabric Air Dispersion System Market Size Forecast by Applications
10.10.1 Industrial
10.10.2 Public
10.10.3 Commercial
10.10.4 Other
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Fabric Air Dispersion System Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Fabric Air Dispersion System Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Fabric Air Dispersion System Market Size Forecast by Type
11.6.1 Round
11.6.2 Half Round
11.6.3 Other
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Fabric Air Dispersion System Market Size Forecast by Applications
11.10.1 Industrial
11.10.2 Public
11.10.3 Commercial
11.10.4 Other
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Fabric Air Dispersion System Analysis and Forecast
12.1 Introduction
12.2 Latin America Fabric Air Dispersion System Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Fabric Air Dispersion System Market Size Forecast by Type
12.6.1 Round
12.6.2 Half Round
12.6.3 Other
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Fabric Air Dispersion System Market Size Forecast by Applications
12.10.1 Industrial
12.10.2 Public
12.10.3 Commercial
12.10.4 Other
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Fabric Air Dispersion System Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Fabric Air Dispersion System Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Fabric Air Dispersion System Market Size Forecast by Type
13.6.1 Round
13.6.2 Half Round
13.6.3 Other
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Fabric Air Dispersion System Market Size Forecast by Applications
13.10.1 Industrial
13.10.2 Public
13.10.3 Commercial
13.10.4 Other
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Fabric Air Dispersion System Market: Competitive Dashboard
14.2 Global Fabric Air Dispersion System Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Durkeesox
14.3.2 FabricAir
14.3.3 Prihoda
14.3.4 DuctSox
14.3.5 EURO AIR
14.3.6 Hero Fabriduct
14.3.7 Aedis
14.3.8 Tianjin TEDA Bosion
14.3.9 JNS
14.3.10 Buna
14.3.11 Suzhou Buding
14.3.12 Avinsi
14.3.13 ATC
14.3.14 TurboaSOX
