Market Overview:
The global flame and detonation arrestor market is expected to grow at a CAGR of 5.5% during the forecast period from 2018 to 2030. The growth in this market can be attributed to the increasing demand for flame and detonation arrestors from various end-use industries, such as chemical, pharmaceutical, oil & gas, petrochemical, agro-chemicals, waste-to-energy plant, mining and power generation. In addition, the growing awareness about safety among consumers is also propelling the growth of this market. Based on type of flame and detonation arrestor device used in an industrial setting or facility protection system application area there are two types: vertical Flame Arresters (VFA) which protect against fires originating from above (e.g.
Product Definition:
Flame arrestors are devices that are used to stop the spread of fire or flames. They work by trapping the flames and preventing them from spreading any further. Detonation arrestors are similar devices, but they are specifically designed to stop the spread of explosions. They work by trapping the explosion and preventing it from spreading any further. Both flame arrestors and detonation arrestors are important safety devices that can help prevent fires or explosions from causing damage or injury.
Vertical Flame and Detonation Arrestor:
Vertical flame and detonation arrestor is a device that is used to prevent the spread of fire in vertical directions and also helps in controlling the explosion. It can be defined as any device which aids in decreasing or extinguishing a combustion flame, especially one involving flammable liquids or gases. The product finds application majorly across various industries such as oil & gas, petrochemical, power generation etc., where it prevents huge losses due to fire accidents caused by errors during operations.
Horizontal Flame and Detonation Arrestor:
Horizontal flame and detonation arrestor is a device that is used to prevent the spread of fire and ensure the safety of people around. It works by smothering or extinguishing any combustible liquids or gases which may be present in an area.
Application Insights:
The market is segmented by application into chemical, pharmaceutical, oil & gas, petrochemical, agro-chemicals, waste-to-energy plant and mining. The oil & gas industry was the largest application segment in 2017 and accounted for over 25% of the total market revenue. The arrestor is used to control the combustion process in various industries such as upstream and midstream petroleum refining as well as onshore and offshore oil production.
Flame retardants are widely used in industrial processes such as polymer manufacturing owing to their ability to reduce heat generation while maintaining productivity levels required by global markets. This has led to an increased demand for flame retardant chemicals which have subsequently driven up arrestor usage across numerous applications sectors including pharmaceuticals where they are extensively utilized due to their superior performance characteristics when compared with conventional fire protection devices that were previously employed at these facilities.
Regional Analysis:
Asia Pacific dominated the global market in 2017 and is expected to continue its dominance over the forecast period. The region has witnessed a surge in construction activities owing to growing industrialization, coupled with increasing population and urbanization. This has led to an increase in demand for flame arrestors across various applications, thereby boosting product sales across this region.
The presence of major chemical manufacturing companies such as BASF SE; Bayer AG; ChemChina Co., Ltd.; INEOS Chemical Company Pte Ltd.; Sinopec Corporation; PetroChina Company Limited; Mocal Energy Group S.A.; Saudi Basic Industries Corporation (SABIC); Korea Gas Industrial Corp.; and Kansai Electric Power Co., Ltd., among others is anticipated to drive growth over the coming years.
Growth Factors:
- Increasing demand for flame and detonation arrestors in oil and gas industry to prevent accidental fires and explosions
- Growing popularity of flame and detonation arrestors in chemical processing industry to avoid hazardous accidents
- Rising installation of flame and detonation arrestors in power generation plants to avert potential disasters
- Proliferation of stringent safety norms across various industries that mandate the use of flame and detonation arrestors
- Technological advancements that have led to the development of more efficient, reliable, and durable flame and detonation arrestors
Scope Of The Report
Report Attributes
Report Details
Report Title
Flame and Detonation Arrestor Market Research Report
By Type
Vertical Flame and Detonation Arrestor, Horizontal Flame and Detonation Arrestor
By Application
Chemical, Pharmaceutical, Oil & Gas, Petrochemical, Agro-chemicals, Waste-to-Energy Plant, Mining, Power Generation, Metals & Mining, Others
By Companies
Emerson Electric Co., THE PROTECTOSEAL COMPANY, Groth Corporation, NAO Inc., SPARTAN CONTROLS, Tornado Combustion Technologies, L&J Technologies, Fabbrica Nazionale Cilindri S.p.A, KITO Armaturen GmbH, Elmac Technologies Limited, Emerson Electric Co.
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
244
Number of Tables & Figures
171
Customization Available
Yes, the report can be customized as per your need.
Global Flame and Detonation Arrestor Market Report Segments:
The global Flame and Detonation Arrestor market is segmented on the basis of:
Types
Vertical Flame and Detonation Arrestor, Horizontal Flame and Detonation Arrestor
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Chemical, Pharmaceutical, Oil & Gas, Petrochemical, Agro-chemicals, Waste-to-Energy Plant, Mining, Power Generation, Metals & Mining, Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Emerson Electric Co.
- THE PROTECTOSEAL COMPANY
- Groth Corporation
- NAO Inc.
- SPARTAN CONTROLS
- Tornado Combustion Technologies
- L&J Technologies
- Fabbrica Nazionale Cilindri S.p.A
- KITO Armaturen GmbH
- Elmac Technologies Limited
- Emerson Electric Co.
Highlights of The Flame and Detonation Arrestor Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Vertical Flame and Detonation Arrestor
- Horizontal Flame and Detonation Arrestor
- By Application:
- Chemical
- Pharmaceutical
- Oil & Gas
- Petrochemical
- Agro-chemicals
- Waste-to-Energy Plant
- Mining
- Power Generation
- Metals & Mining
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Flame and Detonation Arrestor Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
A flame and detonation arrestor is a device that is used to prevent the spread of fire. It works by stopping the flow of oxygen and fuel to an area where there is a potential for an uncontrolled fire.
Some of the major players in the flame and detonation arrestor market are Emerson Electric Co., THE PROTECTOSEAL COMPANY, Groth Corporation, NAO Inc., SPARTAN CONTROLS, Tornado Combustion Technologies, L&J Technologies, Fabbrica Nazionale Cilindri S.p.A, KITO Armaturen GmbH, Elmac Technologies Limited, Emerson Electric Co..
The flame and detonation arrestor market is expected to grow at a compound annual growth rate of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Flame and Detonation Arrestor Market Overview
4.1 Introduction
4.1.1 Market Taxonomy
4.1.2 Market Definition
4.1.3 Macro-Economic Factors Impacting the Market Growth
4.2 Flame and Detonation Arrestor Market Dynamics
4.2.1 Market Drivers
4.2.2 Market Restraints
4.2.3 Market Opportunity
4.3 Flame and Detonation Arrestor Market - Supply Chain Analysis
4.3.1 List of Key Suppliers
4.3.2 List of Key Distributors
4.3.3 List of Key Consumers
4.4 Key Forces Shaping the Flame and Detonation Arrestor Market
4.4.1 Bargaining Power of Suppliers
4.4.2 Bargaining Power of Buyers
4.4.3 Threat of Substitution
4.4.4 Threat of New Entrants
4.4.5 Competitive Rivalry
4.5 Global Flame and Detonation Arrestor Market Size & Forecast, 2018-2028
4.5.1 Flame and Detonation Arrestor Market Size and Y-o-Y Growth
4.5.2 Flame and Detonation Arrestor Market Absolute $ Opportunity
Chapter 5 Global Flame and Detonation Arrestor Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Flame and Detonation Arrestor Market Size Forecast by Type
5.2.1 Vertical Flame and Detonation Arrestor
5.2.2 Horizontal Flame and Detonation Arrestor
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Flame and Detonation Arrestor Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Flame and Detonation Arrestor Market Size Forecast by Applications
6.2.1 Chemical
6.2.2 Pharmaceutical
6.2.3 Oil & Gas
6.2.4 Petrochemical
6.2.5 Agro-chemicals
6.2.6 Waste-to-Energy Plant
6.2.7 Mining
6.2.8 Power Generation
6.2.9 Metals & Mining
6.2.10 Others
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Flame and Detonation Arrestor Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Flame and Detonation Arrestor Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Flame and Detonation Arrestor Analysis and Forecast
9.1 Introduction
9.2 North America Flame and Detonation Arrestor Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Flame and Detonation Arrestor Market Size Forecast by Type
9.6.1 Vertical Flame and Detonation Arrestor
9.6.2 Horizontal Flame and Detonation Arrestor
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Flame and Detonation Arrestor Market Size Forecast by Applications
9.10.1 Chemical
9.10.2 Pharmaceutical
9.10.3 Oil & Gas
9.10.4 Petrochemical
9.10.5 Agro-chemicals
9.10.6 Waste-to-Energy Plant
9.10.7 Mining
9.10.8 Power Generation
9.10.9 Metals & Mining
9.10.10 Others
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Flame and Detonation Arrestor Analysis and Forecast
10.1 Introduction
10.2 Europe Flame and Detonation Arrestor Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Flame and Detonation Arrestor Market Size Forecast by Type
10.6.1 Vertical Flame and Detonation Arrestor
10.6.2 Horizontal Flame and Detonation Arrestor
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Flame and Detonation Arrestor Market Size Forecast by Applications
10.10.1 Chemical
10.10.2 Pharmaceutical
10.10.3 Oil & Gas
10.10.4 Petrochemical
10.10.5 Agro-chemicals
10.10.6 Waste-to-Energy Plant
10.10.7 Mining
10.10.8 Power Generation
10.10.9 Metals & Mining
10.10.10 Others
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Flame and Detonation Arrestor Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Flame and Detonation Arrestor Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Flame and Detonation Arrestor Market Size Forecast by Type
11.6.1 Vertical Flame and Detonation Arrestor
11.6.2 Horizontal Flame and Detonation Arrestor
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Flame and Detonation Arrestor Market Size Forecast by Applications
11.10.1 Chemical
11.10.2 Pharmaceutical
11.10.3 Oil & Gas
11.10.4 Petrochemical
11.10.5 Agro-chemicals
11.10.6 Waste-to-Energy Plant
11.10.7 Mining
11.10.8 Power Generation
11.10.9 Metals & Mining
11.10.10 Others
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Flame and Detonation Arrestor Analysis and Forecast
12.1 Introduction
12.2 Latin America Flame and Detonation Arrestor Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Flame and Detonation Arrestor Market Size Forecast by Type
12.6.1 Vertical Flame and Detonation Arrestor
12.6.2 Horizontal Flame and Detonation Arrestor
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Flame and Detonation Arrestor Market Size Forecast by Applications
12.10.1 Chemical
12.10.2 Pharmaceutical
12.10.3 Oil & Gas
12.10.4 Petrochemical
12.10.5 Agro-chemicals
12.10.6 Waste-to-Energy Plant
12.10.7 Mining
12.10.8 Power Generation
12.10.9 Metals & Mining
12.10.10 Others
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Flame and Detonation Arrestor Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Flame and Detonation Arrestor Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Flame and Detonation Arrestor Market Size Forecast by Type
13.6.1 Vertical Flame and Detonation Arrestor
13.6.2 Horizontal Flame and Detonation Arrestor
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Flame and Detonation Arrestor Market Size Forecast by Applications
13.10.1 Chemical
13.10.2 Pharmaceutical
13.10.3 Oil & Gas
13.10.4 Petrochemical
13.10.5 Agro-chemicals
13.10.6 Waste-to-Energy Plant
13.10.7 Mining
13.10.8 Power Generation
13.10.9 Metals & Mining
13.10.10 Others
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Flame and Detonation Arrestor Market: Competitive Dashboard
14.2 Global Flame and Detonation Arrestor Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Emerson Electric Co.
14.3.2 THE PROTECTOSEAL COMPANY
14.3.3 Groth Corporation
14.3.4 NAO Inc.
14.3.5 SPARTAN CONTROLS
14.3.6 Tornado Combustion Technologies
14.3.7 L&J Technologies
14.3.8 Fabbrica Nazionale Cilindri S.p.A
14.3.9 KITO Armaturen GmbH
14.3.10 Elmac Technologies Limited
14.3.11 Emerson Electric Co.
