Market Overview:
The global flame spraying market is expected to grow at a CAGR of 5.5% from 2018 to 2030. The growth in the market can be attributed to the increasing demand for corrosion protection and repair applications. The wire flame spraying segment is expected to dominate the market during the forecast period, owing to its high efficiency and low cost as compared to other methods of flame spraying. Asia Pacific is expected to be the fastest-growing region during the forecast period, owing to rising industrialization and growing demand for corrosion protection in emerging economies such as China and India.
Product Definition:
Flame spraying is a thermal spray process that uses a flame as the heat source to melt and atomize the feedstock. Flame spraying can be used to deposit both metallic and nonmetallic coatings on substrates. The importance of flame spraying is that it can be used to apply coatings to large surfaces quickly and at relatively low cost.
Wire Flame Spraying:
Wire flame spraying is a process of applying flammable liquids or gases on to burning substances by using insulated wires. It is mainly used for fire-fighting purposes and involves the application of an insulating medium over the wire which carries the liquid or gas on its surface.
Powder Flame Spraying:
Powder flame spraying is a technique of applying flammable liquids or powders by using compressed air. It is used to coat various products such as plastics, rubber, and textiles with thin films of highly inflammable substances. The process can be carried out in two ways; either by using an electric arc furnace or by using a heat-driven spray mechanism.
Application Insights:
The electrical shielding application segment is projected to witness significant growth over the forecast period. Electrical shielding protects against electrical shorts and provides safety from lightning strikes. The corrosion protection for bridges application segment accounted for a major share in the global flame spraying market owing to increasing demand for steel structures and infrastructure development across various regions, including North America, Europe, Asia Pacific and Middle East & Africa.
Corrosion protection of bridges is one of the most critical applications as it protects bridge components from corrosion due to chemical reaction with metal surfaces under water or on land. In addition, rising awareness regarding environmental issues has increased government funding towards environmental preservation which has resulted in higher spending on corrosion protection equipment such as an inhibitor coating system that uses Flame Retardant Chemicals (FRCH). This factor is expected to drive FRCH-based systems over the forecast period thus driving overall market growth during the analysis period.
Regional Analysis:
Asia Pacific dominated the global flame spraying market in 2016 and is expected to continue its dominance over the forecast period. The region accounted for a share of more than 30% in 2016 owing to increasing demand from developing countries such as China, India, and Japan. In addition, rising infrastructure development activities are projected to drive the regional market growth over the forecast period.
The Asia Pacific was followed by North America which accounted for a share of more than 20% in 2016 owing to high product demand from U.S.
Growth Factors:
- Increasing demand for flame spraying in the automotive and aerospace industries due to the advantages of this process over traditional welding and coating techniques.
- Growing popularity of thermal spray coatings as a cost-effective and durable alternative to traditional surface coatings.
- Rising demand for flame spraying equipment from small- and medium-sized businesses due to its low cost and easy operability.
- Technological advancements that have led to the development of more efficient, reliable, and user-friendly flame spraying equipment.
- The increasing use of thermal spray coatings in critical applications such as medical implants, gas turbines, etc., which has led to an increase in R&D spending on this technology
Scope Of The Report
Report Attributes
Report Details
Report Title
Flame Spraying Market Research Report
By Type
Wire Flame Spraying, Powder Flame Spraying
By Application
Corrosion Protection for Bridges, Repair Drive Shafts, Electrical Shielding, Others
By Companies
GfE Gesellschaft für Elektrometallurgie mbH, TWI Ltd, TOCALO Co.,Ltd, Bodycote, IRS Surfacing Technologies Ltd, BÜHRERAG, Surface Technology, Höganäs, Plakart JSC, Abler GmbH & Co. KG, GfE Gesellschaft für Elektrometallurgie mbH, Cremer Beschichtungstechnologie GmbH
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
206
Number of Tables & Figures
145
Customization Available
Yes, the report can be customized as per your need.
Global Flame Spraying Market Report Segments:
The global Flame Spraying market is segmented on the basis of:
Types
Wire Flame Spraying, Powder Flame Spraying
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Corrosion Protection for Bridges, Repair Drive Shafts, Electrical Shielding, Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- GfE Gesellschaft für Elektrometallurgie mbH
- TWI Ltd
- TOCALO Co.,Ltd
- Bodycote
- IRS Surfacing Technologies Ltd
- BÜHRERAG
- Surface Technology
- Höganäs
- Plakart JSC
- Abler GmbH & Co. KG
- GfE Gesellschaft für Elektrometallurgie mbH
- Cremer Beschichtungstechnologie GmbH
Highlights of The Flame Spraying Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Wire Flame Spraying
- Powder Flame Spraying
- By Application:
- Corrosion Protection for Bridges
- Repair Drive Shafts
- Electrical Shielding
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Flame Spraying Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Flame spraying is a technique used by arsonists to start fires. The arsonist sprays an accelerant (such as gasoline, lighter fluid, or kerosene) onto the fuel source of a burning object and then ignites it with a flame.
Some of the key players operating in the flame spraying market are GfE Gesellschaft f¼r Elektrometallurgie mbH, TWI Ltd, TOCALO Co.,Ltd, Bodycote, IRS Surfacing Technologies Ltd, BœHRERAG, Surface Technology, H¶gan¤s, Plakart JSC, Abler GmbH & Co. KG, GfE Gesellschaft f¼r Elektrometallurgie mbH, Cremer Beschichtungstechnologie GmbH.
The flame spraying market is expected to register a CAGR of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Flame Spraying Market Overview 4.1 Introduction 4.1.1 Market Taxonomy 4.1.2 Market Definition 4.1.3 Macro-Economic Factors Impacting the Market Growth 4.2 Flame Spraying Market Dynamics 4.2.1 Market Drivers 4.2.2 Market Restraints 4.2.3 Market Opportunity 4.3 Flame Spraying Market - Supply Chain Analysis 4.3.1 List of Key Suppliers 4.3.2 List of Key Distributors 4.3.3 List of Key Consumers 4.4 Key Forces Shaping the Flame Spraying Market 4.4.1 Bargaining Power of Suppliers 4.4.2 Bargaining Power of Buyers 4.4.3 Threat of Substitution 4.4.4 Threat of New Entrants 4.4.5 Competitive Rivalry 4.5 Global Flame Spraying Market Size & Forecast, 2018-2028 4.5.1 Flame Spraying Market Size and Y-o-Y Growth 4.5.2 Flame Spraying Market Absolute $ Opportunity
Chapter 5 Global Flame Spraying Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Flame Spraying Market Size Forecast by Type
5.2.1 Wire Flame Spraying
5.2.2 Powder Flame Spraying
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Flame Spraying Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Flame Spraying Market Size Forecast by Applications
6.2.1 Corrosion Protection for Bridges
6.2.2 Repair Drive Shafts
6.2.3 Electrical Shielding
6.2.4 Others
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Flame Spraying Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Flame Spraying Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Flame Spraying Analysis and Forecast
9.1 Introduction
9.2 North America Flame Spraying Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Flame Spraying Market Size Forecast by Type
9.6.1 Wire Flame Spraying
9.6.2 Powder Flame Spraying
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Flame Spraying Market Size Forecast by Applications
9.10.1 Corrosion Protection for Bridges
9.10.2 Repair Drive Shafts
9.10.3 Electrical Shielding
9.10.4 Others
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Flame Spraying Analysis and Forecast
10.1 Introduction
10.2 Europe Flame Spraying Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Flame Spraying Market Size Forecast by Type
10.6.1 Wire Flame Spraying
10.6.2 Powder Flame Spraying
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Flame Spraying Market Size Forecast by Applications
10.10.1 Corrosion Protection for Bridges
10.10.2 Repair Drive Shafts
10.10.3 Electrical Shielding
10.10.4 Others
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Flame Spraying Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Flame Spraying Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Flame Spraying Market Size Forecast by Type
11.6.1 Wire Flame Spraying
11.6.2 Powder Flame Spraying
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Flame Spraying Market Size Forecast by Applications
11.10.1 Corrosion Protection for Bridges
11.10.2 Repair Drive Shafts
11.10.3 Electrical Shielding
11.10.4 Others
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Flame Spraying Analysis and Forecast
12.1 Introduction
12.2 Latin America Flame Spraying Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Flame Spraying Market Size Forecast by Type
12.6.1 Wire Flame Spraying
12.6.2 Powder Flame Spraying
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Flame Spraying Market Size Forecast by Applications
12.10.1 Corrosion Protection for Bridges
12.10.2 Repair Drive Shafts
12.10.3 Electrical Shielding
12.10.4 Others
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Flame Spraying Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Flame Spraying Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Flame Spraying Market Size Forecast by Type
13.6.1 Wire Flame Spraying
13.6.2 Powder Flame Spraying
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Flame Spraying Market Size Forecast by Applications
13.10.1 Corrosion Protection for Bridges
13.10.2 Repair Drive Shafts
13.10.3 Electrical Shielding
13.10.4 Others
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Flame Spraying Market: Competitive Dashboard
14.2 Global Flame Spraying Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 GfE Gesellschaft für Elektrometallurgie mbH
14.3.2 TWI Ltd
14.3.3 TOCALO Co.,Ltd
14.3.4 Bodycote
14.3.5 IRS Surfacing Technologies Ltd
14.3.6 BÜHRERAG
14.3.7 Surface Technology
14.3.8 Höganäs
14.3.9 Plakart JSC
14.3.10 Abler GmbH & Co. KG
14.3.11 GfE Gesellschaft für Elektrometallurgie mbH
14.3.12 Cremer Beschichtungstechnologie GmbH