Market Overview:
The global flat welding flange market is expected to grow at a CAGR of 5.5% during the forecast period from 2018 to 2030. The growth in this market can be attributed to the increasing demand for flat welding flanges in various applications, such as tighten the air duct and low pressure circulating water pipeline. In addition, the growing construction and infrastructure industry is also contributing to the growth of this market. Based on type, the global flat welding flange market can be segmented into plate flat welding flange and flat welding flange with neck. The plate flat welding flange segment is expected to grow at a higher CAGR than that of the other type segments during the forecast period from 2018 to 2030.
Product Definition:
A flat welding flange is a type of flange that is used for welding. It has a flat surface that can be welded to another surface. This type of flange is often used in pipe fittings and other applications where welding is needed.
Plate Flat Welding Flange:
Plate flat welding flange is a device used in the fabrication of plate, which is generally made up of steel. It has a series of raised surfaces that come in contact with the work piece and hold it down while welding takes place. The plate can be single or double thicknesses and its width can vary from 1 to 8 inches.
Flat Welding Flange with Neck:
Flat welding flange is a device used in sheet metal fabrication for joining two or more pieces of metal by flat welding. It has certain advantages over the traditional techniques like it can weld different types of metals such as carbon steel, stainless steel, aluminum and others; it can be used on both small and large scale projects; it offers better control while welding as compared to other techniques.
Application Insights:
Tighten the air duct was the largest application segment in 2017. It is expected to grow at a CAGR of XX% over the forecast period owing to an increase in demand for heat and moisture exchange system, HVAC system, which uses flat welding flanges as sealing components. In addition, rising use of these products in tight spaces due to its low profile design is anticipated to drive growth over the coming years.
The Low Pressure Circulating Water Pipeline (LPCW pipeline) application segment is projected register a notable CAGR during the forecast period owing to an increase in global crude oil production that has resulted into rise in LPCW pipeline installations across various regions including Middle East & Africa and Asia Pacific since past few years.
Regional Analysis:
Asia Pacific dominated the global flat welding flange market in 2016 and is expected to continue its dominance over the forecast period. The region accounted for a share of more than 30% in 2016 owing to increasing demand from industries, such as chemical, petrochemical, power generation and others.
The growing construction industry coupled with increasing infrastructure activities in Asia Pacific is anticipated to boost product demand over the forecast period. In addition, rising awareness regarding environment protection along with stringent regulations by various environmental agencies are likely to drive product adoption across end-use industries including construction and energy sector.
Growth Factors:
- Increasing demand for flat welding flange in the oil and gas industry as a result of increasing exploration and production activities
- Rising demand for flat welding flange from the chemical processing industry due to growth in end-user industries such as automotive, construction, and packaging
- Growing popularity of flat welding flange among Original Equipment Manufacturers (OEMs) owing to its advantages over other types of flanges
- Technological advancements that have led to the development of new and improved products with enhanced features
- Rising investments by key players in research and development activities to develop innovative products
Scope Of The Report
Report Attributes
Report Details
Report Title
Flat Welding Flange Market Research Report
By Type
Plate Flat Welding Flange, Flat Welding Flange with Neck
By Application
Tighten The Air Duct, Low Pressure Circulating Water Pipeline
By Companies
Flexitallic Group, Frenzelit GmbH, Leader Gasket Technogies, W. L. Gore & Associates, NIPPON VALQUA, Nichias, NIPPON VALQUA, Garlock Sealing, Lamons, PILLAR Packing, CPS, Inertech
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
155
Number of Tables & Figures
109
Customization Available
Yes, the report can be customized as per your need.
Global Flat Welding Flange Market Report Segments:
The global Flat Welding Flange market is segmented on the basis of:
Types
Plate Flat Welding Flange, Flat Welding Flange with Neck
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Tighten The Air Duct, Low Pressure Circulating Water Pipeline
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Flexitallic Group
- Frenzelit GmbH
- Leader Gasket Technogies
- W. L. Gore & Associates
- NIPPON VALQUA
- Nichias
- NIPPON VALQUA
- Garlock Sealing
- Lamons
- PILLAR Packing
- CPS
- Inertech
Highlights of The Flat Welding Flange Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Plate Flat Welding Flange
- Flat Welding Flange with Neck
- By Application:
- Tighten The Air Duct
- Low Pressure Circulating Water Pipeline
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Flat Welding Flange Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
A flat weld flange is a type of weldment that has a flat top and bottom. This type of weldment is used to join two pieces of metal together.
Some of the major companies in the flat welding flange market are Flexitallic Group, Frenzelit GmbH, Leader Gasket Technogies, W. L. Gore & Associates, NIPPON VALQUA, Nichias, NIPPON VALQUA, Garlock Sealing, Lamons, PILLAR Packing, CPS, Inertech.
The flat welding flange market is expected to register a CAGR of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Flat Welding Flange Market Overview
4.1 Introduction
4.1.1 Market Taxonomy
4.1.2 Market Definition
4.1.3 Macro-Economic Factors Impacting the Market Growth
4.2 Flat Welding Flange Market Dynamics
4.2.1 Market Drivers
4.2.2 Market Restraints
4.2.3 Market Opportunity
4.3 Flat Welding Flange Market - Supply Chain Analysis
4.3.1 List of Key Suppliers
4.3.2 List of Key Distributors
4.3.3 List of Key Consumers
4.4 Key Forces Shaping the Flat Welding Flange Market
4.4.1 Bargaining Power of Suppliers
4.4.2 Bargaining Power of Buyers
4.4.3 Threat of Substitution
4.4.4 Threat of New Entrants
4.4.5 Competitive Rivalry
4.5 Global Flat Welding Flange Market Size & Forecast, 2018-2028
4.5.1 Flat Welding Flange Market Size and Y-o-Y Growth
4.5.2 Flat Welding Flange Market Absolute $ Opportunity
Chapter 5 Global Flat Welding Flange Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Flat Welding Flange Market Size Forecast by Type
5.2.1 Plate Flat Welding Flange
5.2.2 Flat Welding Flange with Neck
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Flat Welding Flange Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Flat Welding Flange Market Size Forecast by Applications
6.2.1 Tighten The Air Duct
6.2.2 Low Pressure Circulating Water Pipeline
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Flat Welding Flange Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Flat Welding Flange Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Flat Welding Flange Analysis and Forecast
9.1 Introduction
9.2 North America Flat Welding Flange Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Flat Welding Flange Market Size Forecast by Type
9.6.1 Plate Flat Welding Flange
9.6.2 Flat Welding Flange with Neck
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Flat Welding Flange Market Size Forecast by Applications
9.10.1 Tighten The Air Duct
9.10.2 Low Pressure Circulating Water Pipeline
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Flat Welding Flange Analysis and Forecast
10.1 Introduction
10.2 Europe Flat Welding Flange Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Flat Welding Flange Market Size Forecast by Type
10.6.1 Plate Flat Welding Flange
10.6.2 Flat Welding Flange with Neck
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Flat Welding Flange Market Size Forecast by Applications
10.10.1 Tighten The Air Duct
10.10.2 Low Pressure Circulating Water Pipeline
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Flat Welding Flange Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Flat Welding Flange Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Flat Welding Flange Market Size Forecast by Type
11.6.1 Plate Flat Welding Flange
11.6.2 Flat Welding Flange with Neck
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Flat Welding Flange Market Size Forecast by Applications
11.10.1 Tighten The Air Duct
11.10.2 Low Pressure Circulating Water Pipeline
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Flat Welding Flange Analysis and Forecast
12.1 Introduction
12.2 Latin America Flat Welding Flange Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Flat Welding Flange Market Size Forecast by Type
12.6.1 Plate Flat Welding Flange
12.6.2 Flat Welding Flange with Neck
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Flat Welding Flange Market Size Forecast by Applications
12.10.1 Tighten The Air Duct
12.10.2 Low Pressure Circulating Water Pipeline
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Flat Welding Flange Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Flat Welding Flange Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Flat Welding Flange Market Size Forecast by Type
13.6.1 Plate Flat Welding Flange
13.6.2 Flat Welding Flange with Neck
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Flat Welding Flange Market Size Forecast by Applications
13.10.1 Tighten The Air Duct
13.10.2 Low Pressure Circulating Water Pipeline
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Flat Welding Flange Market: Competitive Dashboard
14.2 Global Flat Welding Flange Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Flexitallic Group
14.3.2 Frenzelit GmbH
14.3.3 Leader Gasket Technogies
14.3.4 W. L. Gore & Associates
14.3.5 NIPPON VALQUA
14.3.6 Nichias
14.3.7 NIPPON VALQUA
14.3.8 Garlock Sealing
14.3.9 Lamons
14.3.10 PILLAR Packing
14.3.11 CPS
14.3.12 Inertech
